• Proceedings of the Korean Nuclear Society Conference
• /
• 2002.05a
• /
• pp.264.1-264
• /
• 2002

• Proceedings of the Korean Ceranic Society Conference
• /
• 2002.10a
• /
• pp.143.1-143
• /
• 2002

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2002.05a
• /
• pp.213-216
• /
• 2002

산소가 없는 상태에서 비교적 낮은 온도에서의 열, 충격 등에 의해 용이하게 발화, 연소하는 불안정한 물질에 의한 사고는 이전부터 많이 알려져 있다. 최근에는 fine chemical 분야의 발전에 따라 그 위험성이 인식되지 않은 채 제조되는 불안정한 물질이 늘고 있다［1-2］.(중략)

• Journal of Korean Society of Steel Construction
• /
• v.24 no.6
• /
• pp.693-700
• /
• 2012

In this study, the Charpy impact test along with metallurgical observation was conducted to evaluate low temperature impact toughness of structural steel welds with different welding processes to find out the optimal welding process to guarantee the required impact toughness at low temperatures. The welding processes employed are shield metal arc welding (SMAW) and flux cored arc welding(FCAW), which are commonly used welding methods in construction. The Charpy impact test is a commercial quality control test for steels and other alloys used in the construction of metallic structures. The test allows the material properties for service conditions to be determined experimentally in a simple manner with a very low cost. To investigate the impact toughness at low temperatures of the steel welds, specimens were extracted from the weld metal and the heat affected zone. Standard V-notch Charpy specimens were prepared and tested under dynamic loading condition. The low temperature impact performance was evaluated based on the correlation between the absorbed energy and the microstructure. Analysis of the results showed that the optimal welding process to ensure the higher low temperature impact toughness of the HAZ and the weld metal is SMAW process using the welding consumable for steels targeted to low temperature use.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.18-18
• /
• 2010

최근에 건조되는 선박이나 구조물들은 점차 대형화 되어가고, 이에 사용되는 판재들은 점차 고강도 극후판재화 되어가고 있다. 극후판재의 용접성을 향상시키기 위해서는 대입열 용접이 주로 적용되고 있는 실정인데, 30 mmt 이상의 후판을 1 pass로 용접하기 위해서는 EGW(Electro-gas welding) 기법을 사용한다. 대입열 용접은 용접입열(heat input)이 매우 높아 용착금속과 열영향부의 냉각속도가 매우 느려 용접열영향부에서 특히 fusion line 근처의 열영향부는 결정립 조대화 및 취약한 미세조직을 형성함으로서 저온인성을 크게 저하시키고, 연화 현상(softening effect)을 발생시켜 강도가 저하되는 문제점이 주로 발생하였다. 하지만 이런 문제점을 해결하기 위해 대입열용접에 사용된는 강재의 미세조직을 제어하여 AlN, TiN, $TiO_2$ 등의 석출물을 이용한 용접열영향부의 저온인성을 향상시켰다. 이러한 문제점이 발생하는 대입열용접에서 저온인성 시험은 주로 fuison line + 1, 2mm에서 수행한다. 하지만 대입열 용접시 용착금속의 냉각속도도 매우 느리기 때문에 용착금속의 위치에 따라 저온 인성 특성이 다르게 나타날 수 있다. 본 연구에서는 EGW 용착금속의 위치에 따른 저온인성 특성을 평가하기 위해 EH-36N, 40mmt 판재를 사용하여 1pole EG 용접 하였다. 용착금속의 저온인성 특성을 평가하기위해 충격 시편의 노치 위치가 fusion line - 2mm와 용접부 중앙을 기준으로 4곳을 선정하여 충격시험을 수행하였다. 또한 용착금속의 경도 분포를 알아보기 위해 micro vickers hardness tester(mitutoyo UR-501)을 사용해 hardness mapping 시험을 하였다. 용착금속의 저온인성은 미세조직과, 산소량에 따라 변화 할 수 있기 때문에 용착금속 위치를 달리하여 미세조직과 산소량도 각각 분석하였다. 용착금속의 저온인성을 향상시킬 수 있는 침상형페라이트와 비금속개재물의 상관관계에 관해 검토 하였다.

• Polymer(Korea)
• /
• v.29 no.1
• /
• pp.64-68
• /
• 2005

To recycle collected high-impact polystyrene (HIPS) wastes as liquid fuel, depolymerization characteristics of HIPS by pyrolysis was studied. The effects of temperature and time on the pyrolysis of HIPS were investigated. The depolymerization temperature and activation energy of HIPS pyrolysis increased with increasing heating rate. In general, conversion and liquid yield gradually increased with pyrolysis temperature and pyrolysis time. Each liquid product formed during pyrolysis was classified into gasoline, kerosene, light oil and heavy oil according to the distillation temperature based on the petroleum product quality standard of Korea Petroleum Quality Inspection Institute. As a result, the amount of liquid products produced during HIPS pyrolysis was in the order of gasoline》heavy oil〉kerosene〉light oil. Especially 51${\pm}$6 wt% of HIPS treated was obtained as gasoline.

• Korean Journal of Microbiology
• /
• v.34 no.1_2
• /
• pp.43-50
• /
• 1998

Induction and purification of the GroEL homolog from Streptococcus pneumolliae were characterized. The stress conditions were determined by temperature, ethanol, NaCI, $H_2O_2$ methyl methanesulfonate, and ethyl methanesulfonate. And stress induced proteins were analyzed using [$^{35}S$]-methionine labeling method. Heat shock induced the synthesis of a set of about 3 heat shock proteins (hsps) (65, 73, and 84-kDa). Of those 3 hsps, a 65 kDa protein, hsp65, was purified by DEAE-Sephacel and ATP-agarose column chromatography, and used for antibody preparation. Immunoblot analysis employing antisera raised against pneumococcus hsp65 demonstrated cross-reactivity with a 60 kDa protein in Eschericha coli. Also cross reaction of the purified p65 with anti-Escherichia coli GroEL monoclonal antibody demonstrated that pneumococcal hsp65 is the GroEL homolog.

• Korean journal of applied entomology
• /
• v.49 no.4
• /
• pp.363-369
• /
• 2010

A postharvest treatment called CATTS (controlled atmosphere and temperature treatment system) has been used as an alternative nonchemical measure for methyl bromide fumigant treatment. This study applied CATTS to control the red flour beetle, Tribolium castaneum, infesting stored grains. Adults of T. castaneum were susceptible to $46^{\circ}C$ heat treatment. The susceptibility was further enhanced by addition of CA conditions (15% $CO_2$ and 1% $O_2$). When CATTS ($46^{\circ}C$, 15% $CO_2$, $16^{\circ}C/h$ treating rate) was applied to different developmental stages of T. castaneum, it showed 100% control efficacy by 120 min exposure. There was a variation in CATTS susceptibility among developmental stages, in which late instar larvae were most tolerant. Heat shock proteins of T. castaneum appeared to be implicated in the tolerance of CATTS.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.1
• /
• pp.73-79
• /
• 1998

The development of a new material which should be continuously usable under severe environment of very high temperature has been urgently requested. The conventional thermal barrier coating(TBC) is a two layer coating, but a composition and a microstructure of functionally graded material(FGM) are varied continuously from place to place in ways designed to provide it with the maximum function of mitigating the induced thermal stress. The purpose of this study is to evaluate the heat-resistant characteristics by thermal shock of laser and furnace heating. The fracture behaviors of non-FGM(NFGM) and FGM were investigated based on acoustic emission(AE) technique during thermal shock test. Therefore, it can be concluded that FGM gives higher thermal resistance compared to NFGM by AE signal and fracture surface analysis.

• Laser Solutions
• /
• v.6 no.1
• /
• pp.17-24
• /
• 2003

The purpose of this study is to evaluate thermal shock resistance and thermal shock fracture toughness for ATJ graphite. Thermal shock resistance and thermal shock fracture toughness of ATJ graphite are evaluated by using CO$_2$ laser irradiation technique. The laser heat source is irradiated at the center of specimens. Temperature distribution on the specimen surface is measured using the thermocouples of type K and C. SEM and radiographic images are used to observe the cracks which are formed at the thermal shock specimens.