• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.483-486
• /
• 2008

본 연구에서는 디스크 이동식 열분해 실증 설비를 이용하여 폐타이어 열분해 반응을 수행하였고, 생성된 열분해 생성물들의 특성을 분석하였다. 폐타이어 열분해 반응은 약 $550^{\circ}C$에서 90분간 진행되었고, 반응 결과 Recovered Oil, Carbon Black, Non Condensing Gas(NC Gas)가 생성되었다. 폐타이어 열분해 생성물의 수율은 Recovered Oil $40{\sim}50%$, Carbon Black 30$\sim$35%, NC Gas 10$\sim$15%, Steel 10$\sim$15%로 나타났다. 폐타이어 열분해 반응 후 생성된 Recovered Oil은 비점 및 특성 분석 결과 상업용 중유와 비슷한 성질을 나타냈고, 폐타이어 열분해 반응의 또 다른 생성물인 Carbon Black은 특성 분석 결과 고정 탄소 비율이 낮은 반면 회분과 휘발분의 비율이 높아 상업용으로 사용하기 위해서는 적절한 정제 과정이 필요함을 알 수 있었다.열분해 과정 중에 생성된NC Gas는 GC/MS를 이용하여 성분 분석을 수행한 결과, $CO_2$, $CH_4$를 비롯하여 주로 탄화수소류로 이루어졌으며, 대부분이 연료 가스로 구성되어 있어 열분해 반응의 열원으로서 사용이 가능하였다.

• Korean Chemical Engineering Research
• /
• v.57 no.6
• /
• pp.763-767
• /
• 2019

In this study, thermal decomposition characteristics of exo-tetrahydrodicyclopentadiene (exo-THDCP) composed with a single compound were analyzed by using a flow reactor. The experiments were carried out at $500^{\circ}C$, 50 bar and the products of each flow rate condition were analyzed by using a GC/MS. As a result, it was confirmed that exo-THDCP was decomposed mainly into cyclic compounds and a part was isomerized by heat. As the flow rate was increased, the kinds and ratio of compounds produced through the decomposition and isomerization were decreased. Also, the conversion rate of exo-THDCP and the amount of heat absorbed during the decomposition were also decreased. The compounds rapidly produced by decomposition were mainly formed through the radical form of 1-cyclopentylcyclopentene (1-CPCP) which is one of the intermediates that can be formed from exo-THDCP because it has the lowest activation energy of 42 kcal/mol.

• Applied Chemistry for Engineering
• /
• v.16 no.4
• /
• pp.513-518
• /
• 2005

The co-pyrolysis characteristics of poly(vinyl chloride) (PVC) and polystyrene (PS) mixtures with ZnO have been studied by thermogravimetry (TG) and gas chromatograph-mass spectrometry (GC-MS) under various mixing ratios and reaction temperatures. From this work, it was found that the yield of liquid products increased as PS in mixtures increased, whereas that of gaseous products decreased. And as ZnO in mixtures increased, the yields of gaseous products and HCI decreased. The optimal reaction temperature for the maximum yield of liquids products and the control of HCI gas was $500^{\circ}C$.

• Clean Technology
• /
• v.29 no.3
• /
• pp.200-216
• /
• 2023

Ginkgo leaves are considered waste biomass and can cause problems due to the strong insecticidal actions of ginkgolide A, B, C, and J and bilobalide. However, Ginkgo leaf biomass has high organic matter content that can be converted into fuels and chemicals if suitable technologies can be developed. In this study, the effect of pyrolysis temperature, minimum fluidized velocity, and Ginkgo leaf size on product yields and product properties were systematically analyzed. Fast pyrolysis was conducted in a bubbling fluidized bed reactor at 400 to 550℃ using silica sand as a bed material. The yield of pyrolysis liquids ranged from 33.66 to 40.01 wt%. The CO₂ and CO contents were relatively high compared to light hydrocarbon gases because of decarboxylation and decarbonylation during pyrolysis. The CO content increased with the pyrolysis temperature while the CO₂ content decreased. When the experiment was conducted at 450℃ with a 3.0×U_mf fluidized velocity and a 0.43 to 0.71 mm particle size, the yield was 40.01 wt% and there was a heating value of 30.17 MJ/kg, respectively. The production of various phenol compounds and benzene derivatives in the bio-oil, which contains the high value products, was identified using GC-MS. This study demonstrated that fast pyrolysis is very robust and can be used for converting Ginkgo leaves into fuels and thus has the potential of becoming a method for waste recycling.

• Clean Technology
• /
• v.24 no.1
• /
• pp.70-76
• /
• 2018

Pyrolysis of Saccharina japonica in an Auger reactor was conducted by varying the temperature and the auger speed and then physicochemical properties of the S. japonica-derived pyrolysis oil were analyzed. The maximum yield of S. japonica-derived pyrolysis oil (32 wt%) was obtained at a pyrolysis temperature of $412^{\circ}C$ and an auger speed of 20 rpm. Due to low carbon content and high oxygen content in the pyrolysis oil, the higher heating value of S. japonica-derived pyrolysis oil was $23.6MJ\;kg^{-1}$, which was about 60% that of conventional hydrocarbon fuels. By GC/MS analysis, 1,4-Anhydro-d-galactitol, dianhydromannitol, 1-hydroxy 2-propanone and isosorbide were identified as the main chemical compounds of S. japonica-derived pyrolysis oil. The bio-char has low higher heating value ($13.0MJ\;kg^{-1}$) due to low carbon content and high oxygen content and contains a large amount of inorganic components and sulfur.

• Clean Technology
• /
• v.29 no.3
• /
• pp.185-192
• /
• 2023

This study was conducted to obtain basic process simulation data before conducting pyrolysis experiments for the development of a thermochemical conversion system by recirculation of heat carrier and gases thereby. In this study, polypropylene (PP) was used as a pyrolysis sample material as an alternative to waste plastics, and fluid sand was used as a heat transfer medium in the system. Manganese (Mn) was chosen as the catalyst for the pyrolysis experiment, and the catalyst pyrolysis was performed by impregnating it in the sand. The basic properties of PP were analyzed using a thermogravimetric analyzer (TGA), and liquid oil was generated through catalytic pyrolysis under a nitrogen atmosphere at 600℃. The carbon number distribution of the generated liquid oil was confirmed by GC/MS analysis. In this study, the effects of the presence and the amount of Mn loading on the yield of liquid oil and the distribution of hydrocarbons in the oil were investigated. When Mn/sand was used, the residue decreased and the oil yield increased compared to pyrolysis using sand alone. In addition, as the Mn loading increased, the ratio of C₆~C₉ range gasoline in the liquid oil gradually increased, and the distribution of diesel and heavy oil with more carbon atoms than C₁₀ in the oil decreased. In conclusion, it was found that using Mn as a catalyst and changing the amount of Mn could increase the yield of liquid oil and increase the gasoline ratio in the product.

• Analytical Science and Technology
• /
• v.24 no.4
• /
• pp.256-265
• /
• 2011

Ambers have been used as a gemstone and a religious object since the ancient times and found in several archaeological sites in Korea. To prepare an enhanced conservation measures, we surveyed the chemical and spectroscopic properties of the ambers according to the provenance. Total 14 amber samples were collected from 6 different provenances including Baltic, Chiapas, Colombian, Dominican, Fushun and Madagascar amber. Infrared (IR) spectroscopic analysis was conducted for the non-destructive examination of the amber samples. They were also analyzed with pyrolysis/GC/MS (py/GC/MS) at the pyrolysis temperature of $300^{\circ}C$ with the on-line derivatization to trimethylsilyl ester. Baltic shoulder corresponding to the absorption at $1250cm^{-1}{\sim}1150cm^{-1}$ appeared in the IR spectrum of Baltic amber. IR spectra of the other ambers also showed somewhat distinctive characteristic peaks. In py/GC/MS analysis peaks assignable to succinic acid, dehydroabietic acid and pimaric acid were detected, which are known to be the components of the amber. In the meanwhile, the presence of compounds appearing in certain amber will be applied to differentiate the provenances of amber relics if their fragments are available for the analysis. These results are expected to help the confirmation of archaeological amber relics and archaeometric interpretation of provenances and manufacturing techniques.

• YAKHAK HOEJI
• /
• v.26 no.2
• /
• pp.123-128
• /
• 1982

Direct inlet/MS was used to investigate the pyrolysis pathway and the pyrolyzates of tobacco polyphenols as precursor of catechol which has been known as one of the most potent co-carcinogen from cigarette smoke. Caffeic acid, catechol and quercetin, catechol were detected from the pyrolyzates of chlorogenic acid and rutin, respectively. Interrelationship between polyphenols from tobacco leaf and catechol from cigarette smoke was investigated by using HPLC and GC. These results reveal that chlorogenic acid is the most significant precursor of catechol in cigarette smoke.

• Applied Chemistry for Engineering
• /
• v.17 no.6
• /
• pp.638-643
• /
• 2006

Pyrolytic reaction study of dichloromethane ($CH_{2}Cl_{2}$) in excess hydrogen was performed to investigate pyrolytic reaction pathways at a pressure of 1 atm with residence times of 0.3~2.0 sec in the temperature range of $525{\sim}900^{\circ}C$. A constant feed molar ratio $CH_{2}Cl_{2}$:$H_{2}$ of 4:96 was maintained through the experiment. Reagent loss and product formation were monitored by using an on-line gas chromatograph, where batch samples were analyzed by GC/MS. Complete destruction(99%) of the parent reagent was observed at temperature near $780^{\circ}C$ with residence time over 1 sec. Major products observed were $CH_{3}Cl$, $CH_{4}$, $C_{2}H_{4}$, $C_{2}H_{6}$, and HCl. Minor products included $CHClCCl_{2}$, CHClCHCl, $CH_{2}CHCl$, and $C_{2}H_{2}$. The pyrolytic reaction pathways to describe the important features of intermediate product distributions and reagent loss, based upon thermodynamic and kinetic principles, were suggested. The results of this work provided a better understanding of pyrolytic decomposition processes which occur during the pyrolysis of $CH_{2}Cl_{2}$ and similar chlorinated methanes.

• Journal of the Korean Society for Railway
• /
• v.12 no.6
• /
• pp.1059-1066
• /
• 2009

Recently, the amount of thermosetting plastic wastes has increased with the production of reinforced plastic composites and causes serious environmental problems. The epoxy resins, one of the versatile thermosetting plastics with excellent properties, cannot be melted down and remolded as what is done in the thermoplastic industry. In this research, a series of experiments that decompose epoxy resin and recover carbon fibers from carbon fiber reinforced epoxy composites applied to railway vehicles was performed. We experimentally examined various decomposition processes and compared their decomposition efficiencies and mechanical property of recovered carbon fibers. For the prevention of tangle of recovered carbon fibers, each composites specimen was fixed with a Teflon supporter and no mechanical mixing was applied. Decomposition products were analyzed by scanning electron microscope (SEM), gas chromatography mass spectrometer (GC-MS), and universal testing machine (UTM). Carbon fibers could be completely recovered from decomposition process using nitric acid aqueous solution, liquid-phase thermal cracking and pyrolysis. The tensile strength losses of the recovered carbon fibers were less than 4%.