• The KIPS Transactions:PartB
• /
• v.17B no.1
• /
• pp.69-78
• /
• 2010

Spectral modeling synthesis (SMS) has been used as a powerful tool for musical sound modeling. This technique considers a sound as a combination of a deterministic plus a stochastic component. The deterministic component is represented by the series of sinusoids that are described by amplitude, frequency, and phase functions and the stochastic component is represented by a series of magnitude spectrum envelopes that functions as a time varying filter excited by white noise. These representations make it possible for a synthesized sound to attain all the perceptual characteristics of the original sound. However, sometimes considerable phase variations occur in the deterministic component by using the conventional SMS for the complex sound such as whale sounds when the partial frequencies in successive frames differ. This is because it utilizes the calculated phase to synthesize deterministic component of the sound. As a result, it does not provide a good spectrum matching between original and synthesized spectrum in higher frequency region. To overcome this problem, we propose a modified SMS that provides good spectrum matching of original and synthesized sound by calculating complex residual spectrum in frequency domain and utilizing original phase information to synthesize the deterministic component of the sound. Analysis and simulation results for synthesizing whale sounds suggest that the proposed method is comparable to the conventional SMS in both time and frequency domain. However, the proposed method outperforms the SMS in better spectrum matching.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.7B
• /
• pp.660-666
• /
• 2004

Overall TCP performance represented by end-to-end throughput is largely dependent upon its loss recovery performance. In particular non-congestion packet losses caused by transmission errors degrade TCP performance seriously. Using Markov process, we analyze TCP loss recovery performance for correlated packet losses caused by multipath fading. The results show that loss recovery performance can be severely affected by burstiness in packet losses, even if overall packet loss ratio is very low.

• Journal of Korea Multimedia Society
• /
• v.5 no.1
• /
• pp.94-104
• /
• 2002

This paper presents a new way of texture mapping on the Genus N object constructed over a single domain. The problem of 2D texture mapping is the discontinuity of texture domain at the virtual boundary on the object. Such phenomenon decreases smoothness of the object as well as looks unnatural. Especially it is necessary for the Genus N object of infinite coninuity to apply the seamless texture mapping. For seamless texture mapping, a multiperiodic function, which transforms a discontinuous function into a continuous function, is suggested. In some applications, however, the visual seams on the textured object provide more realistic appearance. Therefore, this research supports the interactive control from the discontinuity and the continuity across the boundary using the coefficient of the weight function.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.7
• /
• pp.312-318
• /
• 2006

The conventional lip-synch system has a two-step process, speech segmentation and recognition. However, the difficulty of speech segmentation procedure and the inaccuracy of training data set due to the segmentation lead to a significant Performance degradation in the system. To cope with that, the connected vowel recognition method using Head-Body-Tail (HBT) model is proposed. The HBT model which is appropriate for handling relatively small sized vocabulary tasks reflects co-articulation effect efficiently. Moreover the 7 vowels are merged into 3 classes having similar lip shape while the system is optimized by employing a class dependent SCHMM structure. Additionally in both end sides of each word which has large variations, 8 components Gaussian mixture model is directly used to improve the ability of representation. Though the proposed method reveals similar performance with respect to the CHMM based on the HBT structure. the number of parameters is reduced by 33.92%. This reduction makes it a computationally efficient method enabling real time operation.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.25 no.6
• /
• pp.423-446
• /
• 2023

Shield TBM tunnel linings are segmented into segments and rings. This study investigates the response characteristics of the stress and displacement of the segment lining under seismic waves through modeling that considers the interface behavior between segments by applying a shell interface element to the contact surface between segments and rings. And there is no management criteria for ovaling deformation of segment linings in Korea. So, this study the ovality criteria and meaning of segment lining. The results of study showed that the distribution patterns of stress and displacement under seismic waves were similar between continuous linings and segment linings. However, the maximum values of stress and displacement showed differences from segment linings. The stress distribution of the continuous lining modeled as a shell type has a stress distribution that has continuity in the 3D cylindrical shape, but the segment lining is concentrated outside the segment, and the largest stress occurs at the location where the contact surface between the segment and the ring is concentrated. This intermittent and localized stress distribution shows an increasing as the ovality of the lining increases at seismic waves. The ovality at which the increase in stress distribution begins to show irregularity and localization is about 150‰. Ovality of 150‰ is an unrealistic value that cannot represent actual lining deformation. Therefore, the ovality of the segment lining increase with depth, but it does not have a significant impact on the stability caused by seismic load.

• The Journal of Engineering Geology
• /
• v.7 no.2
• /
• pp.91-99
• /
• 1997

In general, there are various approaches available in literature to model discontinuous rock masses and engineers are often confused which one to use for designing structures in rock masses. Modelling rock masses can be classified mainly into two approaches. One is discrete modelling of intact rock and discontinuities and the other is the equivalent continuum modelling. In this study five models are selected ;(1) Crack tensor model, (2) Equivalent volume defect model, (3) Damage model, (4) Micro - structure model (Parallel model and Series model), and (5) Homogenization model. Most of these models are mainly concerned with how to define additional strain due to discontinuities over the representative elementary volume (REV) and how to relate the stress field of discontinuities to that acting on the REV. The characteristics of these models are clarified by comparing with results of some laboratory tests.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.6
• /
• pp.34-43
• /
• 2008

The state-space average model is extended to buck-boost, and buck-boost topology switching mode DC/DC converters and modified to have higher precision without increment of computation. The modified model is used in continuous conduction mode(CCM) switching DC/DC converters and some significant conclusions are derived. This paper discusses the discontinuous conduction mode(DCM) modeling of DC/DC converter and critical characteristic using average model of switch. Average model of switch approach is expended to the modeling of boundary conduction mode DC/DC converters that operate at the boundary between continuous conduction mode(CCM) and discontinuous conduction mode(DCM). Frequency responses predicted by the average model of switch are verified by simulation and experiment. A prototype featuring 15[V] input voltage, 24[V] output voltage, and 24[W] output power using MOSFET.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.230-230
• /
• 2021

하상변동은 하천을 효과적으로 활용하고, 하천 내 시설물을 유지관리하기 위한 중요한 정보 중 하나이다. 특히, 최근 4대강 사업으로 인한 하상변동 측정에 대한 수요가 높아짐에 따라 하상변동 측정에 대한 수요가 높아지고 있다. 하상변동 측정하기 위한 방법은 일반적으로 경험식 및 모델링과 실측에 의한 방법으로 구분할 수 있다. 경험식 및 모델링에 의한 방법은 대상 하천과 환경 조건에 따라 결과가 상이하게 나타나며, 실측에 의한 방법은 계측기기를 활용한 지점 단위의 측정에 의존하고 있다. 쉽게 말해 기존의 하상변동 측정은 높은 불확실성 보이며, 많은 인력과 비용, 그리고 시간이 소요되는 한계가 있다. 따라서 본 연구에서는 기존 하상변동 측정의 한계를 극복하고, 하상의 움직임과 특성을 파악할 수 있는 AMV(Acoustic Mapping Velocimetry)를 도입하였다. AMV는 초음파를 이용하여 수심을 측정하는 음향 측심기에서 얻은 측정 결과를 바탕으로 초음파 영상을 생성하고, 영상 분석을 통해 하상의 움직임과 특성을 파악하는 알고리즘이다. 본 연구는 AMV의 일환으로, MBES로 측정된 자료를 기반으로 하상의 움직임을 조사하기 위해 AMV를 적용한 실증적 연구로 시도되었다. 본 연구에서 제시한 기술은, 1) ADCP, MBES를 통해 측정된 수심 정보를 초음파 하상 영상을 변환, 2) 연속 초음파 영상에 LSPIV와 같은 영상 유속계 기술을 도입하여 하상 이동속도를 산정, 3) 연속 초음파 영상에서 하상의 평균하상고, 파장 등의 특성을 파악, 4) Exner 방정식을 활용한 하상변동량 산정으로 구성된다. 본 연구에서 제시된 기술은 사용자의 경험과 판단에 의한 영향을 최소화하여 비교적 낮은 불확실성을 가지며, 비교적 적은 인력과 비용, 시간이 소요되는 경제성을 갖추고 있다. 뿐만 아니라 공간적으로 측정된 초음파 영상을 활용한 많큼 상대적으로 넓은 범위에 적용할 수 있다. 따라서 향후 국내 하상변동 연구에 기여를 할 수 있을 것으로 기대된다.

• Journal of Advanced Navigation Technology
• /
• v.11 no.4
• /
• pp.371-377
• /
• 2007

Ionospheric time delay is one of the main error source for single-frequency DGPS applications, including time transfer and Wide Area Differential GPS (WADGPS). Grid-based algorithm was already developed for WADGPS but that algorithm is not applicable to geomagnetic storm condition in accuracy and management. In geomagnetic storm condition, the spatial distribution of vertical ionospheric delay is noisy and therefore the accuracy of modeling become low in grid-based algorithm. For better accuracy, function based algorithm can be used but the continuity of correction message is not guranteed. In this paper, we propose the ionospheric model using wavelet based algorithm. This algorithm shows better accuracy with the same number of correction message than the existing spherical harmonics algorithm and guarantees the continuity of correction messages when the number of message is expanded for geomagnetic storm condition.

• Proceedings of the Korea Contents Association Conference
• /
• 2005.11a
• /
• pp.529-532
• /
• 2005

In anomaly intrusion detection, how to model the normal behavior of activities performed by a user is an important issue. To extract the normal behavior as a profile, conventional data mining techniques are widely applied to a finite audit data set. However, these approaches can only model the static behavior of a user in the audit data set This drawback can be overcome by viewing the continuous activities of a user as an audit data stream. This paper proposes a new clustering algorithm which continuously models a data stream. A set of features is used to represent the characteristics of an activity. For each feature, the clusters of feature values corresponding to activities observed so far in an audit data stream are identified by the proposed clustering algorithm for data streams. As a result, without maintaining any historical activity of a user physically, new activities of the user can be continuously reflected to the on-going result of clustering.