• Proceedings of the Korean Society of Life Science Conference
• /
• 2002.05a
• /
• pp.17-22
• /
• 2002

지구상에는 수천종의 버섯류가 자생하고 있어 유전자원으로서의 중요성이 지대할 뿐만 아니라 기능성 식품소재 및 각종 약리 활성을 나타내는 신약개발 소재로도 크게 주목을 받고 있다. 이들 버섯은 균사체의 영양대사로 얻어지는 대사산물이 축적된 자실체의 형태로 나타나는데, 최근에 와서 자실체 및 균사체의 추출물이나 균사체 배양물이 체질개선이나 각종 병의 예방과 치료에 효과가 있는 것으로 밝혀져 건강식품이나 의약품으로서의 용도가 크게 증가하고 있는 실정이다. 특히, 담자균이 생산하는 특정 구조를 갖는 다당류는 오래전부터 종래의 화학요법제와는 달리 숙주내의 면역 기능을 부활하여 소위 면역요법제로서의 항암효과를 나타냄이 알려져왔었다. 현재까지 제약 및 의학적인 방법이 질병의 주된 치료방법으로 이용되어 왔지만 최근에 특정식품의 섭취가 만성질환의 발생을 억제 또는 지연시킨다는 연구 보고가 나오면서부터 만성질환의 치료방법으로서 식이요법을 중요하게 생각하게 되었다. 따라서 새로운 식품소재 및 가공식품의 개발을 통한 성인병 등의 각종 질병예방이 국민보건문제 해결에 필수적이다. 현재 일본 등에서는 표고버섯, 구름버섯 및 치마버섯 유래의 다당체 또는 단백다당체인 lentinan, krestin 또는 PS-K, schizophyllan 및 PSP 등이 실용화되어 높은 가격에 판매되고 있다. 국내에서도 야생 구름버섯 자실체로부터 추출한 단백 다당체인 Copolang(광동제약)이 개발되어 PS-K와 유사하게 암의 치료에 병행 사용되고 있고, 또 강력한 항암활성이 보고된 상황버섯의 균사체 추출물인 단백 다당체가 Mesima-Ex FK(한국신약)라는 상품명으로 암의 치료에 병행 사용되고 있는 것으로 알려지고 있다. 담자균류와 아울러 미생물 유래 다당체는 그 구조와 특성에 있어서 매우 다양함을 지니고 있다. 이러한 미생물 유래 다당류의 공업적 생산과 이용에 대한 연구로서는 Leuconostoc mesenteroides가 생산하는 dextran이 혈장증량제로 개발된 이래 Xanthomonas campestris가 생산하는 pullulan, Zoogloea rgmigera가 생산하는zooglan둥이 대표적인 예로 보고되고 있다. 한편, 미생물 유래 다당류는 구성당, 분자량, 화학적 구조 등과 같은 특성의 차이에 의해 많은 종류가 존재하고 있으며, 다양한 물성 및 유화제, 응고제, gel 형성제, 필름 형성제, 흡착제, 안정제, 접착제 등과 같은 용도로 광범위하게 이용되고 있다. 또한 근래에 들어서는 미생물 유래 다당체가 지니는 항암활성이 확인되어 새로운 의약품으로서의 개발 가능성이 기대된다. 그 밖에도 기존에 알려져 있는 식물 및 해조류 유래의 다당체와는 달리, 발효조를 이용한 연속배양에 의해 공업적 대량 생산이 가능하며, 더욱이 생산된 다당체의 분리 및 회수가 용이하다는 이점을 지니고 있다. 최근에 들어서는 유전공학적 기법을이용한 고생산성 변이균주 및 새로운 기능을 지닌 다당체의 개발에 관한 연구가 보고되고 있는 등 고부가가치를 지닌 새로운 바이오 소재로서의 기능 및 용도 개발에 관한 연구가 활발히 진행되고 있다. 이러한 항암 활성을 나타내는 여러 가지 담자균류중 Agaricus blazei로부터 생산되는 다당체는 고형암 이외에 S형 결장암, 난소암, 유방암, 폐암, 간암 등에 효과가 입증되었고, 천연물질에 의한 암 면역요법으로 각광을 받고 있으며, 항암 및 항virus의 완치율과 저지율에서 현재 여러가지 약효가 있는 버섯중에서도 탁원한 효과가 있는 것으로 증명되고 있다. 이들 다당체는 사이토카인을 생산시켜서 T임파구와 B임파구의 항원 특이적인 면역반응을 활성화시키고, 세포장해성 T세포와 활성화 대식세포의 세포장해 기능을 충진시켜서 암세포를 파괴시킨다. 또한 콜로니 자극인자인 사이토카인을 생산시켜서 면역담당세포의 신생을 촉진시키기도 하며, 암의 화학요법과 방사선 요법으로 저하된 백혈구를 회복시키는 역할을 한다. 따라서 최근의 연구동향은 생산된 다당체의 항암활성을 향상시키고자 하여 배양기간중에 interleukin을 의도적으로 첨가하는 경향이 있다. 이러한 항암 활성을 나타내는 담자균체 유래 다당체는 버섯의 기원에 따라 그 형태에 약간의 차이를 나타내기는 하나 그 기본 형태는 ${\beta}-(1,6)-glucosyl$ 분지를 가진 ${\beta}-(1,3)-glucan$이며, 평균 분자량은 50 ${\sim}$ 200만 정도이다. Agaricus blazei의 원산지인 브라질의 피에다데(Piedade) 지방의 환경조건(산지의 습도는 80%, 낮 기온 $35^{\circ)C$, 밤 기온 $20{\sim}25^{\circ}C$로 대단히 높으며, 정기적으로 열대지방 특유의 소나기가 내리는 지역)에서 볼 수 있듯이 Agaricus blazei의 성장 환경은 매우 까다로운 편이며, 날것으로는 보관이 잘 안되기 때문에 그 재배에 큰 어려움이 있다. 또한, 고체배양에 의해 생산된 버섯 자실체로부터 유기용매 및 열수추출 방법으로 다당체를 생산하는 방법은 균일한 형태의 버섯 자실체를 공급받기가 어렵기 때문에 다당체의 생산 수율이 낮고, 많은 노동력이 요구되는 어려움이 있다. 그러나 액체배양에 의한 다당체 생산의 경우는 고체배양에 의한 다당체 생산에 비해 일정한 조건하에서 배양이 가능하다는 장점이 있으며, 항상 균일한 균사체 및 배양액을 얻을 수 있다. 따라서 원하는 유용물질을 쉽게 획득할 수 있는 장점이 있다.

• Applied Chemistry for Engineering
• /
• v.21 no.1
• /
• pp.52-57
• /
• 2010

Although chemical sedimentation and ion exchange are usually applied to the treatment of heavy metal ions and radioactive cations, they have some serious disadvantages like a great consumption of chemicals, the disposal of valuable metals, and the secondary pollution of soil by the solid-waste. The advanced countries recently have studied the electrochemical ion exchange, combined electrochemical reduction and ion exchange, for the development of the alternative technique. This study has been performed to investigate the optimum condition for the preparation of the nickel hexacyanoferrate (NiHCNFe) which is an electrochemical ion exchanger. NiHCNFe film was deposited on the surface of nickel plate by chemical method or electrochemical method. The morphology and composition of NiHCNFe were observed by SEM and EDS, respectively. The peak current density of NiHCNFe was measured from the cyclic voltammograms of the continuous oxidation-reduction reaction in a parallel plane ion exchange electrode reactor. It was found that the chemical preparation method was better than the electrochemical method. The concentrated NiHCNFe was apparently deposited on nickel plate when dipping in the preparing solution for 118 h, especially. It also had a best durable performance as an ion exchange electrode.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.9 no.1
• /
• pp.1-12
• /
• 2004

Sedimentary facies and high-resolution echo facies were analyzed to elucidate sedimentation pattern of the late Quaternary glacial-marine deposits in the northern continental margin of the South Shetland Islands. Six sedimentary facies are classified, based on grain texture and sedimentary structures in gravity cores. The high-resolution (3.5 ㎑) echo characters are classified into 6 echo facies on the basis of clarity, continuity, and shape of bottom and subbottom echoes together with seafloor topography. Distribution of the echo and sedimentary facies suggest that there was a significant change in sedimentation pattern between the Last Glacial Maximum (LGM) and subsequent glacier-retreating period. When the grounded glaciers extended to the present shelfbreak during LGM, coarse-grained subglacial tills were widespread in the shelf area, and deep troughs in the shelf were carved beneath the fast-flowing ice steam. As the glacial margin retreated landward after LGM, dense meltwater plumes released from the retreating ice-front were funneled along the glacier-carved troughs, and accumulated channel- or cannyon-fill deposits in the shelf and the upper to mid slope. At that time, slope sediments seem to have been reworked by slope failures and unsteady contour currents, and further transported by fine-grained turbidity currents along the South Shetland Trench. After the glacial retreat, sediments in the shelf and slope areas have been mainly introduced by persistent (hemi) pelagic settling, and fine-grained turbidity currents frequently occur along the axis of the South Shetland Trench.

• Journal of Embryo Transfer
• /
• v.24 no.3
• /
• pp.151-157
• /
• 2009

Serial ultrasonography was conducted on Miniature Schnauzer bitches, on purpose to observe the ultrasonographic appearance of normal ovaries and ovarian structures during the estrous cycle. The size of ovaries was increased from $76.8{\pm}7.5mm^2(Mean{\pm}S.D)$ on Day-12 (Day-0=ovulation day) to $114.4{\pm}5.5mm^2$ on Day-8 and there was no significantly different between both ovaries. The ovaries were recognized by its proximity to the caudal renal pole and appeared moderately echogenic oval shape with a smooth contour. The size of follicles was increased from $8.1{\pm}4.5mm^2$ on Day-12 to $114.4{\pm}5.5mm^2$ on Day-0 and there was no significantly different between both ovaries. The number of follicles was increased from $2.8{\pm}0.7$ on Day-12 to $1.1{\pm}0.1$ on Day-0 and there was no significantly different between both ovaries. The follicles were small anechoic fluid-filled structures in early of proestrus, more increased, and indistinguished from each follicles in late of proestrus. The size of corpora lutea was increased from $19.3{\pm}2.1mm^2$ on Day-0 to $26.4{\pm}8.1mm^2$ on Day-8 and there was no significantly different between both ovaries. The number of corpora lutea was increased from $1.4{\pm}0.6$ on Day-0 to $2.9{\pm}0.4$ on Day-38 and there was no significantly different between both ovaries. The corpora lutea were small anechoic cavity and thin hyperechoic wall in early of diestrus, became more hyperechoic, and increased homogenous structures. The results of this study would be useful for differential diagnosis between normal and abnormal structures of ovaries.

• Journal of the Korea Computer Graphics Society
• /
• v.16 no.1
• /
• pp.9-20
• /
• 2010

In order to visualize participating media in 3D space, they usually calculate the incoming radiance by subdividing the ray path into small subintervals, and accumulating their respective light energy due to direct illumination, scattering, absorption, and emission. Among these light phenomena, scattering behaves in very complicated manner in 3D space, often requiring a great deal of simulation efforts. To effectively simulate the light scattering effect, several approximation techniques have been proposed. Volume photon mapping takes a simple approach where the light scattering phenomenon is represented in volume photon map through a stochastic simulation, and the stored information is explored in the rendering stage. While effective, this method has a problem that the number of necessary photons increases very fast when a higher variance reduction is needed. In an attempt to resolve such problem, we propose a different approach for rendering particle-based volume data where kernel smoothing, one of several density estimation methods, is explored to represent and reconstruct the light in-scattering effect. The effectiveness of the presented technique is demonstrated with several examples of volume data.

• Journal of KIISE:Information Networking
• /
• v.32 no.4
• /
• pp.515-524
• /
• 2005

As the number of the mobile nodes (MNs) increases in the networks, the signaling traffic generated by mobility management for MNs will increase explosively, and such a phenomenon will probably affect overall network performance. In this paper, we propose a novel analytical approach using a continuous-time Markov chain model and hierarchical network model for the analysis on the signaling load of representative IPv6 mobility support Protocols such as Mobile IPv6 (MIPv6) and Hierarchical Mobile IPv6 (HMIPv6). According to these analytical modeling, this paper derives the various signaling costs, which are generated by an MN during its average domain residence time when MIPv6 and HMIPv6 are deployed under the same network architecture, respectively. In addition, based on these derived costs, we investigate the effects of various mobility/traffic-related parameters on the signaling costs generated by an MN under MIPv6 and HMIPv6. The analytical results show that as the average moving speed of an MN gets higher and the binding lifetime is set . to the larger value, and as its average packet arrival rate gets lower, the total signaling cost generated during its average domain residence time under HMIPv6 will get relatively lower than that under MIPv6, and that under the reverse conditions, the total signaling cost under MIPv6 will get relatively lower than that under HMIPv6.

• Korean Chemical Engineering Research
• /
• v.50 no.4
• /
• pp.690-695
• /
• 2012

Gas hydrate is an inclusion compound consisting of water and low molecular weight gases, which are incorporated into the lattice structure of water. Owing to its promising aspect to application technologies, gas hydrate has been widely studied recently, especially $CO_2$ hydrate for the CCS (Carbon Capture and Storage) issue. The key point of $CO_2$ hydrate technology for the CCS is how to produce gas hydrate in an efficient and economic way. In this study, we have tried to study the characteristic of gas hydrate formation using micro-sized ice through an ultrasonic nozzle which generate 2.4 MHz frequency wave. $CO_2$ as a carrier gas brings micro-sized mist into low-temperature reactor, where the mist and carrier gas forms $CO_2$ hydrate under $-55^{\circ}C$ and atmospheric pressure condition and some part of the mist also remains unreacted micro-sized ice. Formed gas hydrate was average 10.7 of diameter at average. The starting ice particle was set to constant pressure to form $CO_2$ hydrate and the consumed amount of $CO_2$ gas was simultaneously measured to calculate the conversion of ice into gas hydrate. Results showed that the gas hydrate formation was highly suitable because of its extremely high gas-solid contact area, and the formation rate was also very high. Self-preservation effect of $CO_2$ hydrate was confirmed by the measurement of $CO_2$ hydrate powder at normal and at pressed state, which resulted that this kind of gas storage and transport could be feasible using $CO_2$ hydrate formation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.4
• /
• pp.907-913
• /
• 1994

The design of railroad bridges differs from road bridges because of the interface between track structure and bridge structure. The track generally consists of Continuous Welded Rail(CWR) which is fixed by fasteners to the sleepers embedded in the ballast. The ballast provides the interface between the track structure and the bridge structure. Large longitudinal forces can develop from the temperature variation in rail and bridge structure. These longitudinal forces are specially important for long bridges because the bridge layout for span length, pier dimensions and arrangement and type of bearings can be governed by these forces. This report provides a comparison of longitudinal track forces determined by analysis and actual measured track forces. In recent practice the longitudinal track force for European railways is analyzed using a finite element analysis method. This method is very time-consuming and requires the detail design of the bridge to be complete. Redesign is required if the design criteria for longitudinal track forces are not satisfied. There is a need to develop a simple analysis method considering the large number of bridge structures and a relatively short design time on the Korean High Speed Rail Project. The analysis results presented herein, based on a simplified analysis, show good agreement with those obtained by finite element analysis, as well as with those measured on an actual track. The proposed analysis method is particularly useful for the preliminary design of bridge structures.

• Journal of the Korea Concrete Institute
• /
• v.24 no.6
• /
• pp.705-714
• /
• 2012

Precast reinforced concrete bridge columns with hollow rectangular section were tested under cyclic lateral load with constant axial force to investigate its seismic performance. After all the precast column segments were erected, longitudinal reinforcement was inserted in the sheath prefabricated in the segments, which were then mortar grouted. Main variables of the test series were column aspect ratio, longitudinal reinforcement ratio, amount of lateral reinforcement, and location of segment joints. The aspect ratios were 4.5 and 2.5, and the longitudinal steel ratios were 1.15% and 3.07%. The amount of lateral reinforcement were 95%, 55%, 50%, and 27% of the minimum amount for full ductility design requirements in the Korean Bridge Design Code. The locations of segment joints in plastic hinge region were 0.5 and 1.0 times of the section depth from the bottom column end. The test results of cracking and failure mode, axial-flexural strength, lateral load-displacement relationship, and displacement ductility are presented. Then, safety of the ductility demand based seismic design in the Korean Bridge Design Code is discussed. The column specimens showed larger ductility than expected, because buckling of longitudinal reinforcing bar was prevented due to confinement developed not only by transverse steel but also by sheath and infilling mortar.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.13 no.1
• /
• pp.61-70
• /
• 2005

In order to reduce salt(as NaCl) contents in food waste and to improve the quality of discharged wastewater produced during the recycling process of food waste for the purpose of compost and feed stuff, a salt reduction process by added water into food waste was developed. The pilot plant with a rotary type salt reduction equipment to manage continuously 0.5 ton food waste per hour was constructed and the efficiency was tested. The amount of added water was calculated by the water content and the efficiency of dewatering process of food waste. Approximately 0.8 liter water per a kilogram of food waste was injected into the reactor in which food waste was pouring simultaneously, then diluted/mixed in a rotary reactor. About 1.1 liter of leachate including added water was generated, but the leachate contained a very high content of organic particles, so most particles were recovered by two step solid-liquid separation process. The first step was a gravitational filtering process using screens with a pore diameter of 1mm, and the second separation process was centrifugal process. Organic quality of food waste which had been desalted was maintained by inputting the entirely recovered organic particles. The efficiency of salt reduction of food waste was estimated by measuring a chloride anion by titration and salinity by a probe. The results by the two different measuring methods were always over 50%, and the quality of final wastewater was improved up to $200mg/{\ell}$ as TS(total solid) by an additional settling process after the two step solid-liquid separation process.