• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.30 no.4
• /
• pp.1-8
• /
• 2022

In this study, we propose trajectory-based arrival management using CDO (Continuos Descent Operations). The operational procedures with TBO (Trajectory-Based Operations) concept were established to allow aircraft and ground system to share the trajectories with each other in real time. The proposed operational concept was validated in the air traffic control simulation environment, which consists of controller working position, pseudo pilot system, air traffic generation system, and controllers' decision support system for arrival management using CDO. Simulation results compared with actual flight data indicate that proposed concept could improve the efficiency of traffic flow management in terms of total descending time and fuel consumption. And it was confirmed that if there is a system that can share and utilize the synchronized trajectory, it can be helpful to control arrival aircraft and apply CDO concept.

• 한국항공운항학회:학술대회논문집
• /
• 2015.11a
• /
• pp.68-77
• /
• 2015

점증하는 항공교통량의 원활한 수용과 안전한 항공기술 저변확대를 위하여 ICAO는 성능기반의 항공교통관리(ATM) 체계와 시스템을 Upgrade할 구체적 이행계획인 ASBU를 개정하고 체약국들의 수용을 촉구하고 있고, 우리나라는 ICAO의 5연임 이사국으로서 ASBU의 주요 Module에 대응하는 모든 Working Paper에 대하여 적극 수용한다는 입장이다. 본 논문은 ASBU의 PIA 4에 해당하는 CDO 및 관련 Module인 TBO의 개념을 살펴보고, 선도적으로 운용되고 있는 사례를 분석해 봄으로써 미래에 대응하는 방안을 찾고자 하였다. CDO는 새로운 장비와 시스템을 갖추지 않더라도 절차의 보완으로 개선할 수 있는 부문에 속하므로 우리나라의 운영 현황을 리뷰하고 그 영향에 대하여 정리해 보았다. 다만, 항공기 고도 강하 단계에서의 개선효과가 상승 또는 순항 단계에 비하여 효율성이 상대적으로 미미한 편이고, ATM 구분 상 기상 등의 외부 변수에 취약하여 효율성 연구에 접근하기 어려운 면이 있으나, 고밀도 공항의 특화된 CDO 기법 개발을 통하여 연료절감 및 탄소배출량 저감, 소음감소의 성과를 이룬 선진 사례를 들어 국내에 적용할 수 있는 방안에 대하여 장기적으로 연구하고자 한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.725-738
• /
• 2006

The final purpose of this study is to develop noise abatement procedures for minimizing damages caused by aircraft noise, to establish appropriate noise limits and to suggest a plan for imposing surcharges and penalties on aircraft infringing the noise limits. This study establishes noise abatement procedures and suggests a plan to complement and improve upon NMS in Gimpo International Airport by reviewing the NMS structure. In addition, this study establishes a noise limit at each noise monitoring system and a verification system to discriminate infringing aircraft. Finally, this study suggests a control plan for aircraft infringing the noise limit.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.5 s.122
• /
• pp.379-390
• /
• 2007

The final purpose of this study is to develop noise abatement procedures for minimizing damages caused by aircraft noise, to establish appropriate noise limits and to suggest a plan for imposing surcharges and penalties on aircraft infringing the noise limits. This study establishes noise abatement procedures and suggests a plan to complement and improve upon NMS in Gimpo International Airport by reviewing the NMS structure. In addition, this study establishes a noise limit at each noise monitoring system and a verification system to discriminate infringing aircraft. Finally, this study suggests a control plan for aircraft Infringing the noise limit.

• Journal of Energy Engineering
• /
• v.12 no.1
• /
• pp.42-48
• /
• 2003

In system planing and operation, voltage and reactive power control is very important. The voltage deviation and system losses can be reduced through control of reactive power sources. In general, there are several different reactive power sources, we used switched shunt capacitor to improve the voltage profile and to reduce system losses. Since there are many switched shunt capacitors in power system, so it if necessary to coordinate these switched shunt capacitors. In this study, Genetic Algorithm (GA) is used to find optimal coordination of switched shunt capacitors in a local area of power system. In case study, the effectiveness of the proposed method is demonstrated in KEPCO's power system. The simulation is performed by PSS/E and the results of simulation are compared with sensitivity method.