• 제목/요약/키워드: 연소 불안정성

검색결과 126건 처리시간 0.027초

모형 연소기의 연소 불안정성 연구용 섭동 장치의 기능 검증 및 분석 (Verification and Analysis of Characteristics of Mechanical Pulsation for Combustion Stability Study in a Model Chamber)

  • 민용호;손채훈
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2012년도 제38회 춘계학술대회논문집
    • /
    • pp.28-30
    • /
    • 2012
  • 본 연구에서는 연소실 내의 압력섭동에 의해 발생되는 연소 불안정 상황을 모사하기 위한 시험 도구로서 섭동장치를 제작하였고, 이에 대한 성능 실험을 수행하였다. 공급되는 산화제의 유동의 흐름을 조절하여 교란을 발생시켜 인위적인 섭동을 유발할 수 있는 디스크 형태의 섭동 발생 장치를 제작하고 특성을 파악하였다. 디스크의 회전에 따라 주파수를 조정하여 모델 연소실내의 공진 주파수와의 동조가 가능하였다. 압력센서를 이용하여 섭동의 크기를 파악할 수 있었다. 따라서 설계된 섭동 장치는 연소 불안정 연구에 활용될 수 있을 것으로 판단된다.

  • PDF

연료와 공기의 혼합정도가 모델 가스터빈 연소기내의 압력변동에 미치는 영향 (Effect of the Unmixedness of Fuel and Air on the Pressure Fluctuations in a Model Gas Turbine Combustor)

  • 홍정구;신현동
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2007년도 춘계학술대회B
    • /
    • pp.3264-3269
    • /
    • 2007
  • Combustion instability is a serious obstacle for the lean premixed combustion of gas turbines, and can even cause fatal damage to the combustor and the entire system. Thus, improved understanding of the mechanisms of combustion instability is necessary for designing and operating gas turbine combustors. In this study, in order to understand the instability phenomena, an experimental study was conducted in a rearwardstep dump combustor with LPG and air. The fluctuations of pressure and heat release were measured by piezoelectric pressure sensor and High speed Intensified Charge Coupled Device (ICCD) camera respectively. Various types of combustion modes occurred in accordance with the equivalence ratio and the fuel supplying conditions. The unmixedness of the fuel and air can be controlled by changing the mixing distance ($L_{fuel}$). It is found that the unmixedness of the fuel and air affects the characteristics of flame behavior and pressure fluctuations in a lean premixed flame.

  • PDF

Turing, Turing 불안정성 그리고 수리생물학과 연소 (Turing, Turing Instability, Computational Biology and Combustion)

  • 김종수
    • 한국연소학회지
    • /
    • 제8권1호
    • /
    • pp.46-56
    • /
    • 2003
  • The present paper is concerned with the development of the computational biology in the past half century and its relationship with combustion. The modem computational biology is considered to be initiated by the work of Alan Turing on the morphogenesis in 1952. This paper first touches the life and scientific achievement of Alan Turing and his theory on the morphogenesis based on the reactive-diffusive instability, called the Turing instability. The theory of Turing instability was later extended to the nonlinear realm of the reactive-diffusive systems, which is discussed in the framework of the excitable media by using the Oregonator model. Then, combustion analogies of the Turing instability and excitable media are discussed for the cellular instability, pattern forming combustion phenomena and flame edge. Finally, the recent efforts on numerical simulations of biological systems, employing the detailed bio-chemical knietic mechanism is discussed along with the possibility of applying the numerical combustion techniques to the computational cell biology.

  • PDF

주기적 불안정성을 가지는 충격파 유도 연소의 무차원 해석 (Nondimensional Analysis of Periodically Unstable Shock-Induced Combustion)

  • 최정열;정인석;윤영빈
    • 한국연소학회지
    • /
    • 제1권2호
    • /
    • pp.41-49
    • /
    • 1996
  • A numerical study is conducted to investigate the periodically unstable shock induced combustion around blunt bodies in stoichiometric hydrogen-air mixtures. Euler equations are spatially discretized by upwind-biased third order scheme and temporally integrated by Runge-Kutta method. Chemistry model used in this study involves 8 elementary kinetics steps and 7 species. At a constant Mach number, the effects of projectile size, inflow pressure and inflow temperature are examined with Lehr#s experimental condition as a reference. In addition to oscillation frequency, characteristic distances and time averaged values are found from the result to find an relation with dimensionless parameters. As a result, it is found that the effects of inflow pressure and body size are very similar and $Damk{\ddot{o}}hler$ number plays an important role in determining the instability characteristics.

  • PDF

SNG 연료의 셀 불안정성 및 층류연소속도에 관한 실험적 연구 (An Experimental on Cellular Instability and Laminar Burning Velocity of SNG Fuel)

  • 김동찬;조준익;이기만
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2015년도 제51회 KOSCO SYMPOSIUM 초록집
    • /
    • pp.109-112
    • /
    • 2015
  • This article describes a cellular instability and laminar burning velocity of simulated synthetic natural gas(SNG) including 3% hydrogen. In this study, experimental apparatus is employed using cylindrical bomb combustor, and investigation is carried out with high speed camera and Schlieren system. The cellular instability is caused by the buoyancy, hydrodynamic instability. Unstretched burning velocity can be determined by extrapolated stretch rate of zero point from measured results. These results were also compared with numerical calculation by Chemkin package with GRI 3.0, USC-II, WANG, C3 Fuel mechanism. As an experimental conditions, equivalence ratios was adjusted from 0.8 to 1.3. From results of this work, the one was found that the cellular instability has occurred by effect of thermal expansion rate and flame thickness. As the other results, unstretched laminar burning velocity was best coincided with GRI 3.0 mechanism.

  • PDF

고체로켓 연소관 내 압력섭동에 대한 입자상 물질에 의한 음향 감쇠 및 연소응답 특성 측정 (Measurement of Pressure-coupled Combustion Instability Characteristics : Acoustic Attenuation by Particulate Matter(Al) and Combustion Response of Solid Propellant)

  • 임지환;이상협;윤웅섭
    • 한국추진공학회지
    • /
    • 제18권2호
    • /
    • pp.16-26
    • /
    • 2014
  • 연소 시, 입자상 물질에 대한 HTPB/AP 계열 고체추진제의 음향특성을 정량화하기 위해서, Pulsed DB/AB T-burner 실험을 수행하였다. 추진제 전면에서 동시 점화를 위해, 대상 고체추진제보다 연소속도가 빠른 다른 고체추진제를 대상 추진제 앞면에 부착하였다. 다량의 알루미늄이 포함된 고체추진제에서는 T-burner 내부에서 만들어진 압력섭동에 의한 음향학적 불안정성이 매우 빠르게 감쇠되었고, 반대로 알루미늄이 포함되지 않은 고체추진제에서는 상대적으로 매우 느리게 감쇠함을 확인하였다. 본 연구에서는 음향학적 특성값들을 정량화하였고, 이를 통해 연소응답 특성을 계산하였다.

230mm급 고체 추진기관의 연소불안정 거동 현상 분석 (An Analysis on Combustion Instability in Solid Rocket Motor of 230mm Grade)

  • 권태훈;노태호;서혁
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2009년도 춘계학술대회 논문집
    • /
    • pp.177-180
    • /
    • 2009
  • 직경 대 길이비(L/D)의 값이 큰 고체 추진기관에서는 축방향 연소불안정 현상이 발생할 가능성이 높다. 일반적으로 이러한 현상을 억제하기 위해 추진제에 금속입자를 포함시키거나 그레인 설계시 축방향 압력 진동을 억제할 수 있도록 형상을 고안한다. Slotted-Tube형 그레인을 적용한 고체 추진기관은 연소시 Slot의 영향으로 인해 축방향 압력진동이 억제되나 Slot의 길이가 짧을 경우 연소 중반이후부터 실린더부의 영향으로 축방향 압력진동이 증폭될 수 있다. 본 연구에서는 230mm급 고체 추진기관의 연소 시험 결과 중 압력에 대해 스펙트럼 분석 및 음향모드 해석을 수행하여 축방향 압력 진동 현상을 분석하였다.

  • PDF

4 Slotted Tube형 고체 추진기관의 연소불안정 거동 현상 분석 (An Analysis on Combustion Instability in Solid Rocket Motor of 4 Slotted Tube Grain)

  • 조기홍;김의용
    • 한국추진공학회지
    • /
    • 제15권4호
    • /
    • pp.48-56
    • /
    • 2011
  • 직경 대 길이비(L/D)의 값이 큰 고체 추진기관에서는 축방향 연소불안정 현상이 발생할 가능성이 높다. 일반적으로 이러한 현상을 억제하기 위해 추진제에 금속입자를 포함시키거나 그레인 설계시 축방향 압력 진동을 억제할 수 있도록 형상을 고안한다. Slotted-Tube형 그레인을 적용한 고체 추진기관은 연소시 Slot의 영향으로 인해 축방향 1차 모드 압력진동이 억제되나 연소관 후방 내열재 삭마로 인해 공동이 형성되어 Vortex Shedding에 의한 2차 모드 압력진동이 증폭될 수 있다. 본 연구에서는 4 Slotted Tube형 고체 추진기관의 설계 개선을 통해 Vortex Shedding을 억제하여 연소불안정 현상을 개선하였다.

경계에서의 음향 임피던스 특성에 대한 연구 고찰 (Brief Note on Acoustic Impedance Characteristics at Flow Boundaries)

  • 서성현
    • 한국추진공학회지
    • /
    • 제21권6호
    • /
    • pp.103-109
    • /
    • 2017
  • 연소화염 열에너지와 결합된 음향에너지 증가는 연소 불안정성을 유발할 수 있다. 연소 안정성 예측을 위해서는 연소실 내부 유동 경계에서 음향특성을 파악해서 궁극적으로 음향에너지의 증가 여부를 파악하는 것이 필요하다. 본 논문에서는 연소기 헤드와 같은 유동 경계 형상에 대한 음향 특성을 연구한 기존의 주요 분석적 결과를 정리하여, Strouhal 수로 표현되는 경계면 음향 임피던스 특성을 알아보았다. 또한 이중 마이크로폰을 활용한 실험적 방법을 통해 경계 음향 임피던스 특성에 대한 이론적/해석적 결과를 검증하기 위한 기법을 조사 정리하였다.

액적 분사/연소를 고려한 초음속 엔진의 buzz 특성 (Buzz Characteristic of Supersonic Propulsion System with Spray Injection and Combustion)

  • 김성진;염효원;성홍계;길현용;윤현걸
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2010년도 제34회 춘계학술대회논문집
    • /
    • pp.411-414
    • /
    • 2010
  • 초음속 엔진에서 흡입구의 buzz현상은 큰 압력진동과 연소 불안정성 그리고 추력 감소 등을 야기한다. 흡입구의 buzz현상과 액적 분사/연소의 동적인 상호관계를 이해하기 위하여 통합된 비정상 연소수치해석을 수행하였으며, 액적 모사를 위하여 TAB(Taylor Analogy Breakup) model을 적용하였다. 흡입구에서의 충격파거동과 주요 위치에서 압력거동을 분석하고 초음속 엔진 전영역에서의 음향모드를 분석하여 현 시스템의 동적거동을 파악하였다.

  • PDF