• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.353-354
• /
• 2004

사용후 핵연료의 조성을 분석하거나 또는 반사전자상과 2차 전자상 등으로 시료를 관찰하기 위해서는 핫셀(Hot cell)에 증착기(coater)를 설치하여 시료표면을 전도성 물질인 탄소 등으로 증착시켜야 한다. 그러나 원격조정기를(manipulator)를 이용하여 수행되는 핫셀에서의 증착작업은 사용후 핵연료 시험의 선진분석기술을 갖고 있는 원자력 선진국에서도 핫셀내에 설치되어 있는 증착기의 탄소봉을 교체하는 작업과 진공장치의 성능 유지가 까다로워 시료표면에 균질하게 전도성 물질을 증착시키는 작업에 많은 어려움을 겪고 있다. 본 연구는 통상적으로 이용되는 증착기를 사용하지 않고 Silver Paint를 사용하여 사용후 핵연료를 분석할 수 있는 새로운 방법에 대한 연구를 수행하였다. 산화물 핵연료는 전기전도도가 매우 낮아($3{\times}10^{-1}~4{\times}10^{-8}/ohm{\cdot}cm$)입사된 전자의 이동이 원활하지 못해 일어나는 들뜸(Charging)현상이 발생한다. 그러나 Silver Paint 에 사용후 핵연료를 접착하면 모세관(capillary)현상에 의해 시료 주위와 핵연료의 결정립계로 Silver가 스며들어 입사된 전자의 이동이 원활해져 전도성이 극히 낮은 시료의 분석이 가능하게 된다. 본 시험에 사용된 EPMA는 (Electron Probe Micro Analyzer, SX-50R, CAMECA, Paris, France) 고 방사능을 띤 조사 핵연료의 시험을 수행할 수 있도록 기기의 적절한 부위에 납과 텅스텐으로 차폐되어 시편의 방사능 세기가 $3{\times}10^{10}Bq$까지 시험 가능한 기기이다. 그림 1은 JAERI 에 설치 운영중인 증착기 설비 사진이다. 그림에서 핫셀에 설치된 증착기의 진공을 유지하기 위해 핫셀 벽을 관통하여 증착기 본체까지 연결된 배출관의 형상과 복잡한 주변장치들을 볼 수 있다. 그림 2는 비조사 핵연료 시편을 Silver Pain떼 접착한 사진이다. 그림은 시료주위와 시료 표면까지 Silver Paint가 도포된 모습을 보여주고 있다. 상용발전소에서 연소도가 50,000 Mwd/tU인 사용후 핵연료를 상기와 같은 방법으로 만든 시편의 표면을 관찰한 사진을 그림 3~8에 나타내었다. 그림 3은 핵연료 중앙부위의 결정립을 나타낸 그림이다. Silver Paint만으로 접착한 시료의 표면관찰 및 정량분석이 그림에서 보듯이 가능함을 확인하였다. 그림 4는 사용후 핵연료시료를 중앙부위에서 가장자리까지를 다섯 부위로 나누어 그 중 중앙부위(1/5) 지점의 입계 및 형상을 관찰한 사진이다. 결정립의 크기가 다른 부위보다 상대적으로 크고, 결정립에 생성된 기공이 발달되어 있음을 볼 수 있다. 그림 5와 6과 7은 중심부위와 rim부위 사이 지점을 관찰한 사진으로서 결정립과 기공의 분포가 비슷한 형상을 나타내고 있음을 관찰할 수 있었다. 그림 8은 rim 부위 사진으로 전형적인 rim 영역 현상을 관찰할 수 있었다. 표 1은 그림 2와 같이 비조사 산화물 핵연료를 Silver Paint로 접착한 시편을 정량 분석한 결과이다. 시편의 조성은 33.6 at% U, 66.4 at% O의 결과를 얻었다. 산화물 핵연료의 표면 관찰 및 정량 분석 시험시 시편 표면을 전도성 물질로 증착시키지 않고, Silver Paint 에 시편을 접착하는 방법으로도 만족한 시험 결과를 얻을 수 있었다.

• Journal of Korea Water Resources Association
• /
• v.42 no.6
• /
• pp.445-455
• /
• 2009

In this paper proportional hazards models for the first through seventh break of 150 mm cast iron pipes in a case study area are established. During the modeling process the assumption of the proportional hazards for covariates on the hazards is examined to include the time-dependent covariate terms in the models. As a result, the pipe material/joint type and the number of customers are modeled as time-dependent for the first failure, and for the second failure only the number of customers is modeled as time-dependent. From the analysis on the baseline hazard functions the failure hazards are found to be generally increasing for the first and second failure, while the hazards of the third break and beyond showed a form of a bath-tub. Furthermore, the changes in the baseline hazard rates according to the time and number of break reflect that the general condition of the pipes is deteriorating. The factors causing pipe break and their effects are analyzed based on the estimated regression coefficients and their hazard ratios, and the constructed models are verified using the deviance residuals of the models.

• Journal of Conservation Science
• /
• v.23
• /
• pp.1-10
• /
• 2008

Consolidants based on tetraethoxysilane (TEOS) such as alkoxysilanes have been widely used for the consolidation of decaying stone heritages. Low-viscosity alkoxysilanes penetrate inside the decaying stone and polymerize within the porous structure of the decaying stone, significantly increasing the cohesion of the material. However, TEOS-based consolidants suffer from practical drawbacks, such as crack formation of the gel during the drying phase due to the developed capillary force, which is typical for TEOS-based consolidants. We prepared new consolidants TEOS-based consolidants containing flexible (3-glycidoxypropyl)trimethoxysilane (GPTMS) and silica nanoparticles (or polyhedral oligomeric silsesquioxanes (POSS)) in order to reduce capillary force development during gel drying. Since the consolidants should have a good interaction with the component of the stone in order to connect the isolate grains of decaying stone, the adhesion interaction of the developed consolidants on the surface of the granite was macroscopically investigated by the ISO 2409 cross cutting test. The adhesion interaction decreased with the addition of silica nanoparticle and POSS while it increased with the addition of GPTMS in TEOS solution.

• Analytical Science and Technology
• /
• v.14 no.5
• /
• pp.432-441
• /
• 2001

An automated on-line portable preconcentration-short column gas chromatograph was developed, which used preconcentrator using adsorption tube with Tenax-GR and Curie-point heating. The developed system operated with 3 steps of processing, preconcentration, thermal desorption, and analysis and cleaning, and could continued operating within 1~2 min cycle. The recoveries of preconcentrator for toluene was ranged between $94.7{\pm}6.6%$ and $103.8{\pm}3.1%$ with less than 7% of RSD. For benzene, toluene and xylene(BTX) standard gas test, IDL was 41, 49, $472ng/m^3$ benzene, toluene and o-xylene, respectively. The BTX mixture was analyzed within 30 sec with baseline separation by the system equipped with 4 m long capillary column. The deficiency of separation power caused by short column was solved by the control of sample injection volume and inlet/outlet pressure ratio. The automated portable preconcentration-short column gas chromatograph system was found to be useful for the continuous air monitoring of BTX at ppb levels in ambient air.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.6
• /
• pp.171-178
• /
• 2010

Pipeline structure is one of core underground infrastructure which transports primary sources. Since the almost pipeline structures are placed underground and connected each other complexly, it is difficult to monitor their structural health condition continuously. In order to overcome this limitation of recent monitoring technique, recently, a Ubiquitous Sensor Network (USN) system based on on-line and real-time monitoring system is being developed by the authors' research group. In this study, real-time pipeline health monitoring (PHM) methodology is presented based on electromechanical impedance methods using USN. Two types of damages including loosened bolts and notches are artificially inflicted on the pipeline structures, PZT and MFC sensors that have piezoelectric characteristics are employed to detect these damages. For objective evaluation of pipeline conditions, Damage metric such as Root Mean Square Deviation (RMSD) value was computed from the impedance signals to quantify the level of the damage. Optimal threshold levels for decision making are estimated by generalized extreme value(GEV) based statistical method. Throughout a series of experimental studies, it was reviewed the effectiveness and robustness of proposed PHM system.

• Journal of The Korean Association For Science Education
• /
• v.33 no.7
• /
• pp.1312-1328
• /
• 2013

In this study, we investigated preservice secondary science teachers' uses of curriculum materials in curriculum design through a case study. Two preservice science teachers at a college of education in Seoul participated in this study. We interviewed them about their beliefs on teaching and learning prior to their teaching students. We then observed their teaching and collected all of the teaching/learning materials. Semi-structured interviews were also conducted before and after the instructions. Their uses of curriculum materials were systematically analyzed in the aspects of reading, evaluating and adapting curriculum materials. The analyses of the results revealed that their uses of curriculum materials had a significant difference in curriculum design. There was a difference in the way of reading curriculum materials that derived from different perspectives of curriculum reconstruction. The perspectives of curriculum reconstruction also affected the way of adapting curriculum materials. While the 'adding' was an important adaptation in curriculum design with active perspectives, the 'changing' was an important one with passive perspectives. In addition, the degrees of evaluating curriculum materials from the learners' views depended on their beliefs on teaching and learning. It was also connected to qualitative differences of adaptation in 'increasing student control over an activity' and 'increasing teacher control over an activity'. Educational implications of these findings are discussed.

• The Korean Journal of Malacology
• /
• v.27 no.1
• /
• pp.15-27
• /
• 2011

This study was performed to observe ultrastructure of the gill and to ascertain the effect of salinity on histopathological and ultrastructural changes in the gill of the Japanese clam, Corbicula japonica. Experimental period was 7 days. Experimental groups consisted of control, 5, 10, 20 psu. $LC_{50}$ (96 h.) by the probit was 19.55 psu. Mortality was significantly different from the control (p < 0.05). Inner demibranch of the gill of C. japonica was wider 1.37 times than outer demibranch (p < 0.001). The filament zone on the plica can be distinguished by the six epithelial celll cell; frontal ciliated epithelium ($7{\mu}m$), latero-frontal ciliated epithelium ($5{\mu}m$), postlatero-frontal epithelim ($3{\times}8{\mu}m$), and lateral ciliated epithelium ($5{\mu}m$) in the frontal zone, endothelial cellin the intermediate zone, and abfrontal cell in the abfrontal zone. It had one type of secretory cell that was filled with fibrous substances of low electron density. The gill of C. japonica exposed to 5 psu for 7 days was observed partially disappearance of the cilia, and glycogen granule in the filament. In the 10 psu, gill appeared partially modification of epithelial cell and destruction of the glycocalyx. Gill exposed to 20 psu was extended nuclus of the ciliated epithelial cell, destruction of the organelles, and observed glycogen granules infiltration and numerous vacuoles. Moreover, more than 50% filaments were observed that come out chitinous rod from disappearance of epithelial cell in the filament. Therefore, the destruction of the cilia and epithelial cell induce physiological activity and it may be leading directly to death.

• Korean Journal of Agricultural Science
• /
• v.27 no.1
• /
• pp.13-19
• /
• 2000

The external morphology of male and female of Liriomyza trifolii (Burgess) was studied using the scanning electron microscopy (SEM). Three types of sensilla were identified on the funicle of antennae. The trichoid sensilla were most conspicious and distributed with a characteristic sharp structure at the apical end. Basiconic sensilla were showed distal curvature about $13{\mu}m$ long and $1.2{\mu}m$ to $1.4{\mu}m$ in diameter. Grooved sensilla were showed a finger-like projections at the peg apex. The function of these sensilla likely to be olfactory. The mouthparts were adapted for sucking food, and formed a elongate rostrum which was incorporated with labrum. The labrum was a small and flap-like shape. The slender and paired maxillary palp seemed to combine with each other lengthwise to long tube. The tarsus typically consisted of 5 segments, which might be variously modified, principally by thickening or flattening. The segment beared a pair of claws. Beneath the claws, there was a pair of pad-like pulvillia and a bristle-like median empodium. L. trifolii might secreted on the pulvillus and empodium an adhesive substance that enable them to cling to smooth surfaces. Male terminalia was complicated. The name 'aedeagus' seemed the best available general term for the copulatory organ, otherwise, female terminalia was usually relatively simple. This structure was reduced and formed a telescopic, eversible, and tubular ovipositor.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.5
• /
• pp.523-533
• /
• 2015

A reactor containment acts as a final barrier to prevent leakage of radioactive material due to the possible reactor accidents into external environment. Because of the functional importance of the containment building, the SIT(Structural Integrity Test) for containments shall be performed to evaluate the structural acceptability and demonstrate the quality of construction. An initial numerical analysis was performed to simulate the results obtained from the SIT for a prestressed concrete(PSC) structure. But the analysis results by the initial model expected smaller displacements than the measured ones by 30% at some locations. Accordingly, the research and development to improve the initial model to corelate the measured results of the SIT more properly have been performed. In this paper, the effects of the loss of concrete due to duct for tendons and the contact of duct and tendons in un-bonded tendon system are mainly evaluated based on the preliminary analysis results. In addition, the importances of the proper definition of mesh connectivity among structural elements of concrete, liner plates, rebars and tendons are discussed.

• Korean Institute of Interior Design Journal
• /
• v.21 no.3
• /
• pp.182-193
• /
• 2012

The percentage of senior citizens is increasing in Korea and it is expected to become an "aging society". Problems with the elderly are becoming a big concern, such as physical and mental illness, losing their jobs and having difficulties at home. But, the silver generation, as they are being known, has changed a lot these days. With the aid of medical developments, the elderly's lifespan has become longer, making them more independent and active. Senior Welfare Center's are places where the elderly can spend their golden years in comfort, meaningfully. Senior Welfare Center's these days provide many different programs, which naturally lead to an increase in elderly users. With the rise in welfare centers and users, research on the subject also grew. As this topic has only recently become an issue, there were not many spatial structure studies considering elderly movement. Therefore, there should be spatial structure research that considers older users space awareness and how it can be managed effectively. The goal of this study is to present basic resources for providing a comfortable senior welfare center for elders. This will be based on quantitative analysis derived from spatial structure research along with special construction characteristics based on the institution's general plan. As a research method, Senior Welfare Center's will be categorized into corridor type, hall type, and hybrid types which then be reproduced into a j-graph. Based on this, special structure characteristics and connection links will be comprehended. Then the connection link will be analyzed based on the space syntax result calculated from each type's integration, connectivity, control value, and intelligibility. The analysis result shows that Senior Welfare Center j-graph's average arrangement is hybrid>corridor>hall types. Those elders lacking awareness need easily perceivable spatial structure's and hall type's would be the best choice to increase their awareness as it has high articulation. However, hall type's would be difficult to construct with the size increase, so hybrid type would be the next logical solution. Space with relatively high articulation will need to be planned in hybrid type's where rest areas can be created within the halls in the Welfare Center in connection to its corridors.