• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.2 s.117
• /
• pp.126-135
• /
• 2007

This paper proposes a new miniaturization method for a parallel coupled line filter with enhanced bandwidth characteristics. A previous method incorporated several advantages, such as size reduction through the use of only a small number of capacitors, in addition to grounding, suppression of harmonic characteristics, and improved skirt characteristics for the parallel coupled line filter, which is conventional in the field of RE filters due to its design and fabrication simplicity. However, the previous method also has disadvantages related to the bandwidth shrinkage of the miniaturized filters. In this paper, the amount of bandwidth shrinkage is analyzed in terms of the relationship between the loaded Q(quality factor) and the group delay of a resonator. Moreover, the reduction in the bandwidth is solved by a design with new design equations. To show the validity of the proposed method, a hairpin filter with a center frequency of 5.2 GHz and an fractional bandwidth(FBW) of 10% was scaled down to half its original dimension by the proposed method with the enhanced bandwidth characteristics. The measured result shows a high level of agreement with theoretical results.

• Journal of the Institute of Convergence Signal Processing
• /
• v.16 no.4
• /
• pp.175-181
• /
• 2015

In this paper, we propose a design method for a digital filter using software in order to analyze the radio astronomy observation data. Recently the analysis method for radio astronomy observing system is transferring from hardware to software by developing of state-of-the-art of computer system. The existing hardware system is not able to easily change the specification because it is implemented to meet special requirements and it takes a high cost and time. In case of software, however, it has an advantage to implement with small cost if open software is used, and flexibly changes to satisfy the desired specification. But, in order to analyze the massive data like radio astronomy with software, the good performance system is needed for computer. Therefore, this paper proposes a digital filter design method using software with the same performance as that of digital filter implemented with hardware in observation system which is operated by the KVN(Korean VLBI Network). To design a digital filter, the proposed method is performed with standard C language and the simulation is conducted with GNU(GNU's Not Unix) Octave and investigated to show its effectiveness. In addition, for the high speed operation of the designed digital filter, the SSE(Streaming SIMD Extensions) library is adopted for available parallel operation. By the proposed digital filter, the digital filtering is performed for the wide band observation data in the KVN observation mode, the filtering result of narrow band observation has no ripple inside of stop band, and confirmed the effectiveness of the proposed method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.4
• /
• pp.789-796
• /
• 2013

It is known that the detection of hopping signals without any information about hopping duration and hopping frequency is rather difficult. This paper considers the blind detection of hopping signal's information such as hopping duration and hopping frequency from the sampled wideband signals. In order to find hopping information from the wideband signals, multiple narrow-band filters are required in general, which leads to huge implementation complexity. Instead, this paper employs the polyphase DFT(discrete Fourier transform) filterbank to reduce the implementation complexity. This paper propose hopping signal detection algorithm from the polyphase DFT filterbank output. Specifically, based on the binary image processing, the proposed algorithm is developed to decrease the memory size and H/W complexity. The performance of the proposed algorithm is evaluated through the computer simulation and FPGA (field programmable gate array) implementation.

• Journal of Navigation and Port Research
• /
• v.34 no.1
• /
• pp.33-37
• /
• 2010

It is very important to prevent the electromagnetic interference and to prevent malfunction of electronic equipments mounted on ships. To solve these problems, in this paper, the EMC filter was designed, fabricated, and tested. The Ni-Zn ferrite beads with high permeability were used to make large inductance as the inductor and the feed-through capacitors without any resonance points. As a result, excellent attenuation characteristics of 25~70 dB were obtained from the 0 kHz~1.5 GHz band. In addition, when the Electric Fast Transient (EFT) of 4 kV in the level 4 of IEC 61000-4-4 was induced the EFT reduced to 600 V. Therefore, it was clearly shown that the developed EMC felter can be used for suppressing the electromagnetic interference on-board electronic devices and equipments.

• Journal of the Korean Society of Radiology
• /
• v.8 no.6
• /
• pp.357-364
• /
• 2014

The filtered back projection in the image reconstruction algorithms for the clinic computed tomography system has been widely used. Noise of the reconstructed image was examined under the input noise for parallel and fan beam geometries. The reconstruction images of $512{\times}512$ size were carried out under 360 and 720 projection by the Visual C++ for parallel beam and fan beam, respectively, and those agreed with the original Shepp-Logan head phantom very much. Noise was generated because of intrinsic restriction (finite number of projections) for the image reconstruction algorithm, filtered back projection, when no input noise was applied. Because the result noise was rapidly increased under 0.5% input noise ratio, technologies for reducing noise in CT system and image processing is important.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.7 no.5
• /
• pp.369-375
• /
• 1996

This paper described the miniaturization of microstrip bandpss filter in UHF using S-plane Prototype. Modern microwave receiver system requires smaller size and better filter performance. The design of filters using bandpass S-plane prototype is made to satisfy these requirements. Bandpass S-plane prototypes are made by exact-synthesis technique using transmission zero locations at wanted frequency bandwidth, and the calculation of prototype values was performed by computer.

• Journal of Korea Multimedia Society
• /
• v.12 no.9
• /
• pp.1316-1322
• /
• 2009

The multicarrier system is in the limelight for broadband wireless communications due to its spectral efficiency. Filtered multitone(FMT) system uses a filter that has several symbol periods duration. Using long-period filter causes a performance degradation because of intersymbol interference in multipath fading channels. In this paper, we propose a simple equalization method which can reduce the ISI due to the wireless channels. The proposed equalization method compensates the ISI by subtracting the estimated ISI components from the current symbol using one-tap equalizer. The performance of the proposed system is verified through theoretical analysis and simulation results show that the proposed system can mitigate the effect of ISI significantly.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.3
• /
• pp.8-14
• /
• 2001

In this paper, we present a new cost function for subband block adaptive algorithm and block conjugate gradient algorithm for noise cancellation of acoustic signal. For the cost function, we process the subband signals with data blocks for each subbands and recombine it a whole data block. After these process, the cost function has a quadratic form in adaptive filter coefficients, it guarantees the convergence of the suggested block conjugate gradient algorithm. And the block conjugate gradient algorithm which minimizes the suggested cost function has better performance than the case of full-band block conjugate gradient algorithm, the computer simulation results of noise cancellation show the efficiency of the suggested algorithm.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.6
• /
• pp.533-539
• /
• 2004

In this work, in order to realize a band pass filter with wide-band characteristics for mobile communications, 2 GHz band pass filter was designed using ring resonator with stub. The three stage wide-band BPF was designed and fabricated. For broadband design, the ring circumference was divided by 4 sections with 1/8 wavelength and 2 sections with 1/4 wavelength which have different line impedances. The characteristics of the proposed BPF were highly improved by using three stage ring resonator. The characteristic impedance values of each sections were obtained by Powell's least square algorithm where differentiations are not needed. The measured results showed a good agreement with the theoretical results as well as ADS simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.2C
• /
• pp.93-98
• /
• 2011

Currently, The new communication system was very important because of the increasing demand for Internet access. One of these alternatives is the PLC. But, Power Line is not suitable for communication. So, electromagnetic wave is generated from Power Line during flow of communication information. And the electromagnetic wave is interfered with Wireless Communication Service using the same frequency range. To eliminate this interference by used Notch tilter. Wavelet OFDM in another way, while one is used. In this paper, Wavelet OFDM CIC filter used in the CMFB structure by applying a further lowering the value of the side-lobe is proposed to improve performance.