• 한국지구과학회:학술대회논문집
• /
• 2005.09a
• /
• pp.93-102
• /
• 2005

변산반도 서부 해안지역의 소규모 유역에 대하여 대수층을 통한 해수침투의 범위를 공간적으로 규명하기 위하여, 시추자료를 포함한 전기비저항 탐사와 지하수의 수질분석을 실시하였다. 전기비저항 탐사는 다층 구조로 되어있는 대수층 내 지하수의 수질변화 특성을 효과적으로 탐지해 낼 수 있는 수직탐사법을 이용하였으며, 탐사결과 겉보기비저항 곡선은 H type에 해당함을 알았다. 시추에 의해 3층 구조로 밝혀진 연구지역에 대하여 총 30 지점에 대한 H type 수직탐사 자료의 1차원 역산결과, 중간층과 상/하부층의 비저항 크기 차이가 크게 나타남에 따라 이 연구에서는 고전도도 지역, 중간지역, 저전도도지역 등 3가지의 영역으로 구분하였다. 15개 지점의 천부 지하수 관정에서 채취된 지하수 시료 분석결과를 TDS에 대한 HCO3/Cl과 Ca/Na 몰비로 도시하였는데, 그래프의 기울기에 따라 크게 2가지 그룹으로 구분되었다. 수직탐사의 3가지 영역과 지하수 수질 분석에 의한 2가지 그룹을 비교한 결과 낮은 농도의 HCO3/Cl과 Ca/Na를 나타내는 관정은 고전도도 지역에 위치하며, 높은 농도의 HCO3/Cl과 Ca/Na를 나타내는 관정은 저전도도 지역에 위치하는 것으로 나타났다. 따라서 이 연구에서 제시한 바와 같이 전기비저항 수직탐사 결과와 지하수 수질분석 결과를 복합 해석하는 경우 시추자료가 제한적인 해안지역 대수층을 통한 해수침투 범위를 효과적으로 규명할 수 있는 것으로 밝혀졌다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2007.06a
• /
• pp.317-322
• /
• 2007

Seismic exploration is divided by reflection and refraction method greatly, and reflection method can analyze complicated underground structure in the basis high resolution image, and refraction method can grasp the velocity structure of underground accurately. This thesis confirmed application of mixed exploration techniques using advantages of reflection and refraction. Reflection data processing applied conventional technique, and inversion of refraction data applied travel time tomographic technique that using SIRT method. Also, could establish initial information in model variable and improved the result of inversion by restricting model parameter value and dimension of area. Confirmed efficient fact in sequence and velocity structure grasping by utilizing accurate initial velocity model made out on the basis of marine reflection data, and mixed exploration technique using reflection and refraction have propriety that can trust in field application.

• 한국지구과학회:학술대회논문집
• /
• 2010.04a
• /
• pp.124-127
• /
• 2010

본 연구에서는 통가 해역 라우분지의 열수 광상 가능성이 있는 해산들에 대하여 자력탐사가 수행되었다. 그 중 TA 09 해산에 대하여 심해견인 자력탐사가 실시되었으며 심해견인 자력탐사는 정밀한 탐사를 위하여 해저면에서 약 50 ~ 60 m 고도를 유지하며 자력계를 견인하였다. 탐사지역의 총 자력 성분은 Overhauser Proton Magnetomer (모델 SeaSPY 300(해상자력계)m, SeaSPY 6000(심해견인자력계))를 이용하여 측정되었다. 탐사 해산들 중 해상자력탐사와 심해자력탐사가 같이 수행된 TA 09 해산과 주요 열수 광상 유망 지역으로 분류되는 TA 12, 26 해산에 대해서만 측정된 지자기값을 이용하여 자기이상도를 구하였으며 자화역산법을 이용하여 자화이상도를 제작하고 분석하였다. TA 09 해산과 TA 26 해산에서의 해상 자기이상도는 쌍극자 이상형태의 단순이상을 보이며 TA 12 해산에서는 정상부에 고이상이 나타나고 그 주변으로는 저이상대가 분포하고 있다. TA 09 해산에서의 해상자력계에 의한 자기이상치와 심해견인자력계에 의한 자기이상치를 비교하여 보면 거의 10배 이상의 해상도 차이를 보여준다. 연구지역 탐사해산들의 해저지형과 비교하여 보면 열수분출대의 가능성이 높은 저자화이상대들은 주로 해산의 정상부 및 정상부 칼데라와 그 칼데라 주변부에 주로 위치하고 있는 모습을 나타내고 있다. 향후 타 탐사 해산들에 대한 자기이상에 대한 정밀처리/분석 후 탄성파 탐사결과, 암석샘플의 결과 및 지화학결과 등과 비교하여 열수광상의 존재 여부 및 위치 추정 분석이 필요할 것으로 판단된다.

• Geophysics and Geophysical Exploration
• /
• v.13 no.4
• /
• pp.330-335
• /
• 2010

In order to estimate the confidence level of the velocity distribution shown in a velocity image reconstructed from a travel-time tomography, the ray coverage and the inversion characteristics of the system matrix were investigated. The targets of the analysis is the first arrival travel-time, the raypath information, and the resulting velocity model. The ray coverage, degree of ray and model coupling, was estimated by the number of rays and total ray length in a velocity grid, and information regarding the resolution and uncertainties involved in the reconstructed velocity model was derived from the results of the SVD analysis of the system matrix that relates the data space (first arrival travel times) to the model space (velocity distribution in tomogram).

• Resources Recycling
• /
• v.5 no.2
• /
• pp.45-51
• /
• 1996

Domestic coal contains approximnlely 03 to 7 percentage of sulfur. When the suliur in coal is burned, exhaust gas , nay be thc causc of air pollution problcms as well as acid rain. Thc government dccideil lo strengthen the environmcnlal protection policy a1 the 270 ppm of SO, for the coal-Ered plants and to stari in Ian. 1, 1999. This study was carried out lo rcmove the stlfur and mineral mancrs in the samplw using wet msg~xiic separatol ant1 oil agglomeration apparatus. The rcsults for the wet magnetic separalion showed that the total sulfur removal from Kangnung coal sample was 60.8% with 82.6% combustible recovery. For the results of oil agglomeration testa, combustible recavety, ash nod sulfur rcmovcl horn Maro coal sample were 98.0, 70.9 and 95.7 percent, respectively.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2000.09a
• /
• pp.132-146
• /
• 2000

Seismic refraction survey was performed for 10 lines along NE-SW and NW-SE directions above Nampoong gallery at Makyo-ri, Dogye, Samcheok, Kangwon-do. 48 geophones were laid in line with the interval of 1m, and a 5Kg hammer was used as a source at 5 points for each line. Data processing was done using reciprocal time method, GRM, and traveltime tomography which utilizes wavefront expansion method for forward process and STRT for inversion. The result shows that the first layer has its lower boundary between 3.49m and 8.88m. The P-wave velocity of the first and the second layer were estimated as 270${\~}$360m/s and 1550${\~}$1940m/s respectively. When the boundary of the first and second layer is smooth enough and the velocity difference is large enough, GRM has little advantage over reciprocal time method. The result of reciprocal method and traveltime tomography shows consistency. The northeast part of the boundary has syncline structure, which is similar to the topography above. This implies that the collapse of the cavities of Nampoong gallery result in the subsidence of the ground surface. The subsidence is in progress across the Youngdong railroad, therefore a proper reinforcement work is required.

• Geophysics and Geophysical Exploration
• /
• v.22 no.4
• /
• pp.210-224
• /
• 2019

Surface wave (SW) surveys, which have been applied to numerous application fields ranging from micro-scale ultrasonic analysis to geological scale analysis, are widely used to monitor near-surface stability. The survey method is basically made through analysis on dispersion of SW propagating along the earth surface, in order to delineate shear velocity structure of subsurface. SW survey data are inverted with assuming one-dimensional (1D) layered-earth in order to recover shear wave velocities of each layer, after being analyzed to make the dispersion curve that shows phase velocity of SW with respect to frequency. This study reviews surface wave surveys with explaining the basic theory including the characteristics of dispersion and the procedure of general data processing. Even though surface wave surveys can be categorized into active and passive methods, this paper focuses only on active surface wave methods which includes continuous SW (CSW), spectral analysis of SW (SASW) and multichannel analysis of SW (MASW). Passive method will be reviewed in the subsequent paper.

• Geophysics and Geophysical Exploration
• /
• v.14 no.2
• /
• pp.140-145
• /
• 2011

In order to analyze the influence of the noise on a cross-well traveltime tomography to detect a small scale low velocity body in a homogeneous medium, the first arrival travel times were computed one a tunnel model by a finite-difference ray tracing scheme. Three different types and four different intensity levels of white noises were added to the computed first arrival travel times, and velocity tomograms were constructed using an iterative inversion method (SIRT). Tomograms with the noise intensity up to 10% of the maximum traveltime delay in the tunnel model, showed the exact location of the tunnel. However, the velocity shown at the tunnel location was not close to air velocity but only slightly less than the velocity of the background medium. The additive random noise showed significantly less degree of influence on the resulting tomogram than the source- and receiver consistent noise.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2006.06a
• /
• pp.95-100
• /
• 2006

To reveal subsurface structures of the Ulsan fault, seismic data were recorded along a 750-m long line near Nongso-Eup in Ulsan. P and S waves were generated simultaneously by impacting a 5 kg sledgehammer on a tilted plate. The data were received by 16 10-Hz 3-component geophones at 3 m intervals. Refracted P waves were inverted using the tomography method. Dip moveout and migration were applied to reflection data processed following a general sequence. Four layers were identified based on P-wave velocities and P- and S-wave stacked image. From top to bottom, the P-wave velocity of each layer ranges in $300{\sim}1100\;m/s$, $1100{\sim}1700\;m/s$, $1700{\sim}2700\;m/s$, and greater than 2700 m/s. The corresponding thickness of the top three layers averages 3.9 m, 5.9 m, 4.4 m, respectively. The S-wave stack section is effective to define subsurface structures shallower than 10 m.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2006.06a
• /
• pp.181-186
• /
• 2006

An imaging method of seismic sources using time-reversal wave propagation is presented. The method is based on the time-reversal invariance and the spatial reciprocity of the wave equation. Time-reversal wave propagation has been used to image anomalous features of a midium in medical imaging, non destructive testing and waveform tomography. Seismogram is the record whose energy is propagated from the seismic source. If time-reversed seismogram propagates back into the medium, seismic energy is concentrated at the origin time of the event and at the source location. In this work, a staggered-grid finite-difference method of the elastic wave equation is parallelized for 3-D wave propagation simulation. With numerical experiments, we show that the time-reversal imaging will enable us to explore the spatio-temporal history of complex earthquake.