• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.5
• /
• pp.475-485
• /
• 2010

This paper proposes a novel concept for a microstrip resonator that can function as a filter and as an antenna at the same time. The proposed structure consists of an outer ring, an open loop-type inner ring, a circular patch, and three ports. The frequencies where the proposed structure works as a filter and as an antenna, respectively, are determined primarily by the radius of the inner ring and the circular patch. The measured results show that, when the microstrip resonator operates as a filtering device, this filter has about 15.1 % bandwidth at the center frequency of 0.63 GHz and a minimum insertion loss of 1.5 dB within passband. There are three transmission zeros at 0.52 GHz, 1.14 GHz, and 2.22 GHz. In the upper stopband, cross coupling - taking place at the stub of the outer ring - and the open loop-type inner ring produce one transmission zero each. The circular patch generates the dual-mode property of the filter and another transmission zero, whose location can be easily adjusted by altering the size of the circular patch. The proposed structure works as an antenna at 2.7 GHz, showing a gain of 3.8 dBi. Compared to a conventional patch antenna, the proposed structure has a similar antenna gain. At the resonant frequencies of the filter and the antenna, high isolation(less than -25 dB) between the filter port and the antenna port can be obtained.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.7
• /
• pp.709-718
• /
• 1992

A new edge detection operator superimposing two displaced Gaussian smoothing filters Is proposed as an approximate operator for the DroG(flrst derivative of Gaussian) known as a sub-op-timal step edge detector. The performance of the proposed edge detector Is very close to that of the DroG with the performance criteria . signal to noise ratio, locality, and multiple response. And the computational complexity can be reduced almost by a half of that of DroG, because of the use of common 2-D smoothing filter for DroG and LoG ( Laplacian of Gausslan) systems.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.4
• /
• pp.661-668
• /
• 2012

A coaxial-cable impedance transformer that can be used in high power and wideband frequency range is an arbitrary impedance transformation ratio by an additional coaxial cable. The coaxial-cable impedance transformer to be 50-${\Omega}$ to 25-${\Omega}$ impedance transformation ratio is easily operated an wideband power divider by connecting two 50-${\Omega}$ lines at 25-${\Omega}$ impedance point. This wideband power divider has a poor output matching characteristic and a poor isolation characteristic between two output ports. In this paper, it proposes a coaxial-cable power divider to be a good output matching and isolation characteristics as it uses the singly terminated filter design theory. The odd-mode operation characteristic of the suggested power divider to use singly terminated low pass filter coefficient due to matching order and ripple value is examined by ADS program. And, it fabricates and measures the operation characteristic of 2-way power divider with 2nd-order and 4th-order matching circuit.

• Proceedings of the KAIS Fall Conference
• /
• 2000.10a
• /
• pp.109-112
• /
• 2000

본 논문에서는 신호의 분리와 합성이 가능한 Diplexer를 제작하였다. 저역 통과 여파기와 고역 통과 여파기의 특성을 정합하여 Diplexer로 구현함으로써 신호의 분리와 합성이 가능하다는 것을 시뮬레이션을 통해 확인하였다. 또한 신호의 분리와 합성의 가능성을 입증하기 위해 실제 마이크로스트립구조의 Diplexer를 제작, 측정한 결과 각각의 통과 대역폭 내에서 0.4dB, 0.8dB이내의 삽입손실과 -20dB의 반사손실이 됨을 실험결과를 통해 알 수 있었고 또한, 인덕터의 구현 방법을 마이크로스트립으로 하여 주파수 특성과 재현성을 높였다.

• Proceedings of the KAIS Fall Conference
• /
• 2000.10a
• /
• pp.114-117
• /
• 2000

일반적으로 LPA에서는 위상을 조정하기 위해 매우 긴 지연선을 필요로 한다. 지연성능은 고전력이나 저전력 모두에서 임의의 길이의 동축선로를 여러번의 과정을 거쳐 적용해봄으로써 구현된다. 그러나 동축선로형 지연선은 부피나 높은 삽입손실 등의 제약이 많이 따른다. 본 논문에서는 마이크로스트립 형태의 지연선 대역통과 여파기를 설계하였고, 실험결과는 지연선여파기가 동축선로를 대신하여 LPA 시스템에 적용이 가능함을 보였다.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1995.10a
• /
• pp.787-789
• /
• 1995

• The Magazine of the IEIE
• /
• v.9 no.4
• /
• pp.33-39
• /
• 1982

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.15 no.4
• /
• pp.20-25
• /
• 1978

Two augmented integrators are sufficient as memory elements to realize an arbitrary second-order voltage transfer funtion which has complex poles in left-half S-plane, where S is a complex variable. The augmented integrator is characterized by transfer funtion B/(S+A), where A and B are real constant.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.7 no.1
• /
• pp.1-8
• /
• 1970

The band-stop filters which resonate at intervals of one-quarters, and three-quarters guide-wave length are designed and its frequency characteristics are measured. 2K25 klystrons (at 8000MC) were used as microwaves source. This bandstop filters were designed from low pass prototype and the Impedance of Impedance of these filters was made to be equal to one of the low pass prototype. It is demonstrated that the filters considered here, have narrow stop bandwidths and sharp characteristics in the stop band.

• The Journal of the Acoustical Society of Korea
• /
• v.6 no.3
• /
• pp.52-59
• /
• 1987

In this paper, we present a method of realizing an infinite impulse response (IIR) digital filter (DF)using linear delta modulation (LDM) as a simple analog/digital (A/D) converter. This method makes the realization of IIR digital filters much simpler than that of conventional ones because it does not require hardware multipliers and a pulse code modulation (PCM) A/D converter. Compared to the finite impulse respponse (FIR) LDMDF of Lee and Un [1] , this IIR LDMDF requires significantly less computation time.