• Journal of Broadcast Engineering
• /
• v.9 no.1
• /
• pp.43-53
• /
• 2004

In this paper, we propose a robust deinterlacing algorithm which combines edge dependent interpolation (EDI) and global motion compensation (GMC). Generally, EDI algorithm shows a visually better performance than any other deinterlacing algorithm using one field. However, due to the restriction of information in one field, a high duality progressive image from Interlaced sources cannot be acquired by intrafield methods. On the contrary, since algorithms based on motion compensation make use of not only spatial information but also temporal information, they yield better results than those of using one field. However, performance of algorithms based on motion compensation depends on the performance of motion estimation. Hence, the proposed algorithm makes use of mixing process of EDI and GMC. In order to obtain the best result, an adaptive thresholding algorithm for detecting the failure of GMC is proposed. Experimental results indicate that the proposed algorithm outperforms the conventional approaches with respect to both objective and subjective criteria.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.05a
• /
• pp.275-278
• /
• 2006

Systematic experiments in $CH_4/Air$ counterflow diffusion flames diluted with He have been undertaken to study the oscillatory instability in which lateral heat loss could be remarkable at low global strain rate. The oscillatory instability arises for Lewis numbers greater than unity and occurs near extinction condition. The dynamic behaviors of extinction in this configuration can be classified into three modes; growing, harmonic and decaying oscillation mode near extinction. As the global strain rate decreases, the amplitude of the oscillation becomes larger. This is caused by the increase of lateral heat loss which ran be confirmed by the reduction of lateral flame size. Oscillatory edge flame instabilities at low global strain rate are shown to be closely associated with not only Lewis number but also heat loss (radiation and lateral heat loss).

• Proceedings of KOSOMES biannual meeting
• /
• 2005.11a
• /
• pp.197-202
• /
• 2005

Generally, a semiconductor chip measured with a few micro units is captured by line scan camera for higher inspection accuracy. However, the faulty inspection requires an exact boundary detection algorithm because it is very sensitive to scan speed and lighting conditions. In this paper we propose boundary detection using subpixel edge detection method in order to increase the accuracy of bump faulty detection on chips. The bump edge is detected by first derivative to four directions from bump center point and the exact edge positions are searched by the subpixel method. Also, the exact bump boundary to calculate the actual bump size is computed by LSM(Least Squares Method) to minimize errors since the bump size is varied such as bump protrusion, bump bridge, and bump discoloration. Experimental results exhibit that the proposed algorithm shows large improvement comparable to the other conventional boundary detection algorithms.

• Journal of Korean Society for Geospatial Information Science
• /
• v.13 no.3 s.33
• /
• pp.87-94
• /
• 2005

3D positional information of lane can be automatically calculated tv combining GPS data, IMU data if coordinates of lane centers are given. The Road Safety Survey and Analysis Vehicle(RoSSAV) is currently under development to analyze three dimensional safety and stability of roads. RoSSAV has GPS and IMU sensors to get positional information of the vehicle and two road-facing CCD cameras for extraction of lane coordinates. In this paper, we develop technology that automatically detects centers of lanes from the road-facing cameras of RoSSAV. The proposed algorithm defines line-support regions by grouping pixels with similar edge orientation and magnitude together and extracts a line from each line support region by planar fitting. Then if extracted lines and the region in-between satisfy the criteria of brightness and width, we decide this region as lane. The proposed algorithm was more precise and stable than the previously proposed algorithm based on brightness threshold method. Experiments with real road scenes confirmed that lane was effectively extracted by the proposed algorithm.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.10
• /
• pp.162-170
• /
• 2013

In recent years, the interests and needs of the Pedestrian Protection System (PPS), which is mounted on the vehicle for the purpose of traffic safety improvement is increasing. In this paper, we propose a pedestrian candidate window extraction and unit cell histogram based HOG descriptor calculation methods. At pedestrian detection candidate windows extraction stage, the bright ratio of pedestrian and its circumference region, vertical edge projection, edge factor, and PCA reconstruction image are used. Dalal's HOG requires pixel based histogram calculation by Gaussian weights and trilinear interpolation on overlapping blocks, But our method performs Gaussian down-weight and computes histogram on a per-cell basis, and then the histogram is combined with the adjacent cell, so our method can be calculated faster than Dalal's method. Our PCA reconstruction error based pedestrian detection candidate window extraction method efficiently classifies background based on the difference between pedestrian's head and shoulder area. The proposed method improves detection speed compared to the conventional HOG just using image without any prior information from camera calibration or depth map obtained from stereo cameras.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.3
• /
• pp.72-78
• /
• 2000

In this study, we propose a model verification algorithm based on DCT and neural network for ATM security system. We construct database about facial images after capturing thirty persons facial images in the same lumination and distance. To simulate model verification, we capture four learning images and test images per a man. After detecting edge in facial images, we detect a characteristic area of square shape using edge distribution in facial images. Characteristic area contains eye bows, eyes, nose, mouth and cheek. We extract characteristic vectors to calculate diagonally coefficients sum after obtaining DCT coefficients about characteristic area. Characteristic vectors is normalized between +1 and -1, and then used for input vectors of neural networks. Not considering passwords, simulations results showed 100% verification rate when facial images were learned and 92% verification rate when facial images weren't learned. But considering passwords, the proposed algorithm showed 100% verification rate in case of two simulations.

• Journal of Korea Multimedia Society
• /
• v.9 no.10
• /
• pp.1282-1295
• /
• 2006

This paper proposes a method of image tile mosaics to preserve detailed depiction of the source image. This method enhance the shortcoming of the previous mosaic methods that cannot express the detailed depiction because of the gap between tiles. Our method is implemented by the usage of image tiles to preserve detailed depiction of the source image, as well as the usage of 2-layered tiles to.eliminate the gap between tiles. The method suggested in this paper are composed of following process. First of all, the position of the upper layer tile is located through a centroidal voronoi diagram to which an edge avoidance technique is applied, and the position of the lower layer tile is calculated using Delaunay triangulation. Secondly, discover the size and direction field of the tile considering the relation between tiles. Thirdly, adopt a photomosaic technique to use the image tiles. At this time, the technique of multi-level indexing is used to accelerate the speed of image searching. Through above process, the gap between tiles is minimized against other methods and a mosaic image with a maximized detailed description is achieved.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.463-466
• /
• 2008

With the development of Information Technology in recent years, the image has been an important means to store or express information. Generally, during the process of acquiring and storing images, the images can be corrupted by noise of which typical types are Impulse(Impulse Noise) and AWGN(Addiction White Gaussian Noise). Impulse noise shows irregularly in black and white over the length and breadth of the image by sharp and sudden disturbance of the image signal. In the Impulse noise environment, SM(Standard Median) filter would be used because of its good noise removal performance and simple algorithm. However, when SM filter removes noise, it also produces error at the edge of image and causes whole image quality deterioration. In this paper, we propose a method based on modified nonlinear filter operation scheme which enhances the features of noise removal and detail image preservation when restoring image in Impulse noise environment. And, we compared it with existing methods and the performances through simulation.

• Journal of KIISE:Software and Applications
• /
• v.34 no.10
• /
• pp.929-936
• /
• 2007

The novel vision-based scheme for real-time extracting traffic parameters is proposed in this paper. Detecting and tracking of vehicle is processed at local region installed by operator. Local region is divided to segmented regions by edge and frame difference, and the segmented regions are classified into vehicle, road, shadow and headlight by statistical and geometrical features. Vehicle is detected by the result of the classification. Traffic parameters such as velocity, length, occupancy and distance are estimated by tracking using template matching at local region. Because background image are not used, it is possible to utilize under various conditions such as weather, time slots and locations. It is performed well with 90.16% detection rate in various databases. If direction, angle and iris are fitted to operating conditions, we are looking forward to using as the core of traffic monitoring systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.8
• /
• pp.1518-1527
• /
• 1994

An algorithm for BPSK demodulation of which channel is an electric distribution line is developed, and realized in this paper. To realize the BPSK demodulation by microprocessor, BPSK signal that is received through the distribution line must be converted to digital signal. A hardware which converts BPSK signal to digital one has been designed in this paper, and an algorithm for BPSK demoduation of which channel is distribution line has been also developed in algorithm for BPSK demoduation of which channel is distribution line has been also developed in this paper by paying the attention to the fact that a modulated point appears up and down according to the rising edge and falling edge of the modulated binary signal if the carrier frequency is even times to the modulated binary signal, and by paying the attention to the fact that the signal duration or modulated point is twice of the other point. The microprocessor demodulation system with the algorithm has been realized. The system proved to have 0.02%(or less) bit error rate in real BPSK demodulation.