• Journal of Hydrogen and New Energy
• /
• v.33 no.6
• /
• pp.636-642
• /
• 2022

The "Hydrogen Economic Activation Road map" was announced in 2019, and hydrogen demand is expected to exceed 470,000 tons per year in 2022 and keep increasing. Under this circumstance, it has become important to understand the greenhouse gas (GHG) emissions associated with various hydrogen production pathways. In this study, the evaluation of life cycle GHG emissions regarding the hydrogen produced as by-product from coke oven gas (COG) in steel mill is conducted. To cover the possible range of operations, three literatures were reviewed and their data of inputs and outputs for the process were adopted for calculation. Life cycle inventories and emission factors were mostly referred to GaBi and Intergovernmental Panel on Climate Change (IPCC) guidelines, respectively. When there are multiple products from a single process, the energy allocation method was applied. Based on these sources and the assumptions, the life cycle emission values of COG-based hydrogen were found to be 3.8 to 4.7 kg/CO₂-eq./kg-H₂.

• Journal of Hydrogen and New Energy
• /
• v.35 no.2
• /
• pp.146-151
• /
• 2024

The demand for research on materials with excellent cryogenic strength and ductility has been increasing, particularly for applications such as liquid hydrogen (20 K) storage tanks. To effectively utilize liquid hydrogen, a system capable of maintaining and operating at 20 K is essential. Therefore, preliminary research and verification of the cooling system are crucial. In this study, a heat transfer analysis was conducted on a cooling system to meet the cryogenic environment requirements for cryogenic hydrogen chamber, which are conducted at liquid helium temperatures (4 K). The cooling mechanism in a helium cooling system was examined using numerical analysis. The numerical cooling trends were compared with experimentally obtained cooling results. The good agreement between numerical and experimental results suggests that the numerical approach developed in this study is applicable over a wide range of cryogenic systems.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.12 no.3
• /
• pp.264-272
• /
• 1983

In order to investigate the effect of dietary protein and energy on growing female and male rats, Sprague-Dawley 90 female rats and 54 male rats of 3 weeks old weighing approximately 70-80g and 54-75g, respectively, were subjected feeding trials for 8 weeks and then subsequently to metabolic trials for 2 weeks. Three dietary energy levels(3,200, 3,600, 4,000 kcal/kg) were employed and each energy level contained three protein levels (15, 25, 35% of 3600 kcal ME/kg) and three rat levels (10, 20, 40% of 3,600 kcal ME/kg) by addition of an appropriate amount of carbohydrate and the following result were obtained. As the protein level was increasing, digestibilities of dry matter and carbohydrate tended to decrease whereas that of protein was slightly increasing. On the other hand, digestibility of fat was always very high regardless of the level of protein but that tended to be slightly improved as the level of energy or rat increased. The digestibilities of female and male rats tended to be same. The digestibilities of dry matter, crude protein, crude fat and carbohydrate were 83%, 90%, 96% and 93%, respectively, and they were neither affected by protein and energy levels nor observed differently depending upon the sex. Nitrogen retention of female and male rats were best for LPHE ration. In other words, both nitrogen retention was improved as the level of energy increased and the level of protein decreased. The gross energy intake was high at low protein level in female rats and at medium protein level in male rats. That tended to decrease as the level of energy increased in female rats whereas that was not affected by the level of energy in male rats. The metabolic energy efficiency was highest for LPHE ration in female rats and for LPME ration in male rats.

• Korean Journal of Construction Engineering and Management
• /
• v.18 no.2
• /
• pp.3-11
• /
• 2017

Aging buildings over 15 years reaches about 74% of 177 thousand buildings in Domestic public buildings. Due to the aging building, the energy loss is a serious problem. In order to reduce the energy usage through improving the energy efficiency on the existing buildings, the government & the local autonomous entity conduct the energy efficiency projects through the remodeling, repairing & equipment replacement on the existing buildings. The green remodeling is applied to the existing public buildings in recently revised the act on the creation and support of green building. However, the standard is not obvious that the work scope of green remodeling, financing and project delivery method. This paper propose is to suggest project delivery system for vitalizing the green remodeling. Green remodeling is defined on basis of the occurring work under project life cycle based on the existing building process and the financing method for owners and companies and the project delivery system according to work scope of green remodeling are proposed in this paper

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.28 no.4
• /
• pp.141-147
• /
• 2018

Solar energy has attracted big attentions as one of clean and unlimited renewable energy. Solar energy is transformed to electrical energy by solar cells which are comprised of multi-silicon wafer or mono-silicon wafer. Monosilicon wafers are fabricated from the Czochralski method. In order to decrease fabrication cost, increasing a poly-silicon charge size in one quartz crucible has been developed very much. When we increase a charge size, the temperature control of a Czochralski equipment becomes more difficult due to a strong melt convection. In this study, we simulated a Czochralski equipment temperature at 20 inch and 24 inch in quartz crucible diameter and various charge sizes (90 kg, 120 kg, 150 kg, 200 kg, 250 kg). The simulated temperature profiles are compared with real temperature profiles and analyzed. It turns out that the simulated temperature profiles and real temperature profiles are in good agreement. We can use a simulated profile for the optimization of real temperature profile in the case of increasing charge sizes.

• Journal of Energy Engineering
• /
• v.14 no.4 s.44
• /
• pp.248-258
• /
• 2005

In the present study, in order to estimate possibility as a waste heat recovery system, three different heat exchangers are developed. The developed heat exchangers are tile system to supply the hot water using fermentation of waste biomass. For the experiments, various biomass materials were examined to obtain the best heat recovery. Waste heat recovery system was studied numerically and experimentally. Heat exchanger system was designed specially to obtain the optimum heat exchanging performance. The biomass heat exchanger was operated for 20 minutes, after 1 hour from start-up, the temperature of the biomass dump has been raised to the possible operation temperature. From the three time operations per day, the system would be able to supply the amount of energy, about 62,400 kcal/day.

• Journal of Broadcast Engineering
• /
• v.1 no.2
• /
• pp.118-132
• /
• 1996

This paper proposes a wavelet transform- based image compression method using the energy distribution. The proposed method Involves two steps. First, we use a wavelet transform for the subband decomposition. The original image Is decomposed into one low resolution subimage and three high frequency subimages. Each high frequency subimages have horizontal, vertical, and diagonal directional edges. The wavelet transform is luther applied to these high frequency subimages. Resultant transformed subimages have different energy distributions corresponding to different orientation of the high pass filter. Second, for higer compression ratio and computational effciency, we discard some subimages with small energy. The remaining subimages are encoded using either DPCM or quantization followed by entropy coding. Experimental results show that the proposed coding scheme has better performance in the peak signal to noise ratio(PSNR) and higher compression ratio than conventional image coding method using the wavelet transform followed by the straightforward vector quantization.

• Journal of Korea Multimedia Society
• /
• v.14 no.7
• /
• pp.884-894
• /
• 2011

We proposed a new algorithm for detection of first(S1) and second heart sound(S2). Many researches for detecting primary components and those algorithms have good performance at normal heart sound, but the performance is degraded at abnormal heart sound which is contain murmurs generated by heart disease. Therefore we proposed the S1, S2 detection algorithm using three-order Shannon energy difference. Using S1, S2's character which has large energy difference than murmurs, it is reduced noise and detected S1, S2. According to simulation results, not only normal heart sound but also abnormal heart sound, the proposed algorithm has better performance than former study at abnormal heart sound.

• The Journal of the Korea Contents Association
• /
• v.14 no.5
• /
• pp.347-355
• /
• 2014

In this research, we analyzed the effect of environmental friendliness on consumer's purchase intention with an energy saving product. We found that the economic benefit, easy to use and environmental friendliness have significant positive(+) effects on environmental friendliness of the energy saving product. We also found that the effects of economic benefit and environmental friendliness differ by the level of consumer's environmental consciousness. Consumers with high level of the environmental consciousness are less sensitive on the change of the economic benefit and more sensitive on the change of the environmental friendliness than consumers with low level of the environmental consciousness. The results of this research imply that when planning a marketing strategy for an environmental friendly product it is important to emphasis the economic benefit to consumers with low level of the environmental consciousness while it is important to emphasis the environmental friendliness to consumers with high level of the environmental consciousness.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.219-219
• /
• 2011

순 장파복사량은 지표면으로 입사되는 하강 장파복사량(Downward Longwave Radiation, $R_{ld}$)과 지표면에서 반사되는 상승 장파복사량(Upward Longwave Radiation, $R_{lu}$)의 차이로 정의되는데 이는 에너지 수지 및 농업기상 연구의 중요한 주제 중 하나로서 다루어져 온 순복사량의 중요한 요소이다. 일반적으로 $R_{lu}$의 경우 지표면 온도와 방사율(emissivity)를 이용하여 산출되므로 정확히 추정이 가능하나, $R_{ld}$의 경우 대기 최상층에서 관측되는 방사량과 지표면 근처의 방사량을 함께 고려해야 하므로 실측이 어렵다. $R_{ld}$는 야간 복사계(pyrgeometer)를 이용하여 직접적으로 측정할 수 있지만 관측기기 자체가 구비되어있는 관측소가 적어 매우 드물게 이용된다. 또한 단파 복사 에너지 측정 기기에 비해 비용이 많이들고 종종 관측값이 큰 오차를 가지고 있기 때문에 실무에 적용하기 힘든 단점이 있다. 따라서 기상 관측소에서 얻어지는 증기압과 온도 관측치를 물리식, 경험식 등에 적용하여 산정하게 된다. 현재는 $R_{ld}$의 추정은 관측된 방사량간의 관계를 나타내는 경험식을 기반으로 지표면 근처의 대기 온도와 습도를 이용하여 산출하는 방법이 널리 사용되고 있다. 본 연구에서는 증발산 산정 알고리즘 개발의 시발점으로써 $R_{ld}$를 먼저 구하고 $R_{lu}$를 구하였다. 신뢰성 높은 방법을 이용하여 $R_{ld}$를 구하게 되면 정확도 높은 $R_N$을 구하는 데 기여할 수 있으며, 궁극적으로 보다 정확한 증발산을 산정할 수 있게 된다. $R_{ld}$는 일반적으로 clear sky 조건 하에서의 복사 에너지 플럭스($R_{ldc}$)를 구한 후 구름의 양에 따라 보정한다. 하강 장파복사량의 경우 널리 사용되는 공식 중 하나인 Brutsaert의 공식을 사용하였다. 광릉, 해남에 위치한 플럭스 타워지점에서 실측된 기온과 실제 수증기압을 입력인자로 사용하여 지점별 $R_{ldc}$를 먼저 구하고 Moderate Resolution Imaging Spectroradiometer(MODIS) 영상자료를 이용하여 검증한 뒤 최종적으로 남한지역을 대상으로 순 장파복사량 지도를 작성하였다. 이를 위해 MODIS 07 대기 프로파일 산출물(Atmospheric Profile Product)중 기온 및 이슬점온도를 추출하여 산정식의 입력자료로서 사용하였다. 상승 장파복사량의 경우 MODIS 11 지표면 온도 산출물(Land Surface Temperature product)를 이용하여 산정하였다. 이는 남한 지역의 증발산량 추정 및 에너지 수지 연구를 위한 중요한 기본 자료로서 유용하게 사용될 수 있으리라 사료된다.