• Journal of the Korean Society for Marine Environment & Energy
• /
• v.14 no.1
• /
• pp.40-50
• /
• 2011

We study the characteristic and total flux of non-point pollutants such as total suspended solids (TSS), chemical oxygen demand (COD), dissolved nutrients, total phosphorus (TP) and total nitrogen (TN) in the storm water runoff from urban streams and sewer outlets of Banweol Industrial Complex around Shihwa Lake. The concentrations of non-point pollutants were generally increased with increasing of the duration and intensity of rainfall. Mean TSS concentration of Ansan stream was higher than that of sewer outlets but mean concentrations of COD, TP and TN were approximately 2~5 times higher of sewer outlet than of urban stream. TSS showed statistically positive relationships with COD and TP but it had negative correlation with dissolved nutrients. There was a significant correlation between total flux of non-point pollutants in the storm water runoff and total basin area of each sewer outlet, showing that the highest runoff flux was observed at 3rd sewer outlet which represents the largest basin area from Banweol industrial complex. Total runoff fluxes for TSS, COD, TP and TN in this study were 187,536 kg, 17,118 kg, 922 kg, 13,519 kg, respectively. Given the basin area of sewer outlet in Banweol industrial complex which corresponds only 3% from total catchment area around Shihwa Lake, enormous amount of non-point pollutants will be entered into Shihwa Lake without any treatment. It is necessary to manage and reduce of various non-point sources and pollutants because the runoff of nonpoint pollutants during storm events should be deteriorating the water quality of Shihwa Lake. Our results provides useful informations on the development of best managements practices (BMPs) for effective implementation of total pollution loads management system of Shihwa Lake.

• The Korean Journal of Malacology
• /
• v.19 no.1
• /
• pp.41-51
• /
• 2003

Reproductive cycle with the gonadal development of Ruditapes philippinarum can be classified into five successive stages by histological observations: early active stage (January to March), late active stage (February to May), ripe stage (April to August), partially spawned stage (May to October), and spent/inactive stage (August to February). Changes in total protein contents in the adductor muscle tissues reached the maximum in the early and late active stages (February) and appeared the minimum in the ripe and partially spawned stages (May), while changes in their contents in the visceral mass tissues reached the maximum in the ripe and partially spawned stages (June) and gradually decreased in the partially spawned stage (June to October). On the whole, changes in total protein contents showed a negative correlationship between the adductor muscle and visceral mass tissues (r = -0.292, p < 0.05). Changes in total lipid contents in the adductor muscle tissues reached the maximum in the inactive and early active stages (January) and sharply decreased in the early and late active stages (February), while their contents in the visceral mass tissues reached the maximum in the ripe and partially spawned stages (April) and gradually decreased in the partially spawned stage (to October). On the whole, changes in total lipid contents showed a negative correlationship between the adductor muscle and visceral mass tissues (r = -0.699, p<0.05). Changes in glycogen contents in the adductor muscle tissues reached the maximum in the late active and ripe stages (April) and rapidly decreased in the partially spawned stage (May to October), while their contents in the visceral mass tissues reached the maximum in the early and late active stages (February) and rapidly decreased in the late active stage (March). Thereafter, their levels gradually increased in the ripe and partially spawned stages (April to July). On the whole, changes in glycogen contents appeared no correlationship between the adductor muscle and visceral mass tissues (r = 0.062, p > 0.05). These results indicate that the adductor muscle and visceral mass tissues are an important energy storage and nutrient supply organ in the Manila clams, and the nutrient contents of the adductor muscle and visceral muscle tissues change in response to gonadal energy needs.

• Journal of the Korean Geographical Society
• /
• v.36 no.4
• /
• pp.474-482
• /
• 2001

The purpose of this study is to investigate the formation and development processes of beach resort by fabric construction in a island environment. The results are as follows. (1) The research area(Tong-ri beach, Bokil-myon, Chollanam-do)has been transformed to belch by sedimentary environmental change since latter half of 1800's. (2) The mean slope of beach face is 0.96°, and the difference of attitude between beach and mud flat face is 75cm. (3) The mean particle size of beach surface sediment is 3.53$\Phi$. This value is very finer than that of any other beach in Korea peninsula. But its value is coarser than that of mud flat surface sediment. (4) The particle size distribution of core sediment is become changed to fine particle in 70cm depth. This value is corresponded to difference of altitude between beach face and mud flat face. (5) The analysis of aerial photographs after 1970 indicates that sedimentation process was not brisked since 1970's. Consequently, the research ares has been developed by sedimentary environmental change for sea-level rise effect and wave height energy rise effect.

• Composites Research
• /
• v.14 no.3
• /
• pp.18-31
• /
• 2001

Interfacial and microfailure properties of the modified steel, carbon and glass fibers/cement composites were investigated using electro-pullout test under tensile and compressive tests with acoustic emission (AE). The hand-sanded steel composite exhibited higher interfacial shear strength (IFSS) than the untreated and even neoalkoxy zirconate (Zr) treated steel fiber composites. This might be due to the enhanced mechanical interlocking, compared to possible hydrogen or covalent bonds. During curing process, the contact resistivity decreased rapidly at the initial stage and then showed a level-off. Comparing to the untreated case, the contact resistivity of either Zr-treated or hand-sanded steel fiber composites increased to the infinity at latter stage. The number of AE signals of hand-sanded steel fiber composite was much more than those of the untreated and Zr-treated cases due to many interlayer failure signals. AE waveforms for pullout and frictional signals of the hand-sanded composite are larger than those of the untreated case. For dual matrix composite (DMC), AE energy and waveform under compressive loading were much higher and larger than those under tensile loading, due to brittle but well-enduring ceramic nature against compressive stress. Vertical multicrack exhibits fur glass fiber composite under tensile test, whereas buckling failure appeared under compressive loading. Electro-micromechanical technique with AE can be used as an efficient nondestructive (NDT) method to evaluate the interfacial and microfailure mechanisms for conductive fibers/brittle and nontransparent cement composites.

• Journal of Mushroom
• /
• v.12 no.2
• /
• pp.138-143
• /
• 2014

This study was conducted to know the optimal supplementary level of spent mushroom substrates (Flammulina velutipes) as an energy source and fermentation period in manufacturing of rye silage. Whole crop rye was harvested at full bloom stage and ensiled with spent mushroom substrates of 20%(S-20), 40%(S-40) and 60%(S-60) as fresh matter basis. Each silage was prepared in plastic buckets included with vinyl bag by three replications and fermented for 3, 6 and 9 weeks, respectively. Moisture contents of whole crop rye at full bloom stage and spent mushroom substrates were 62.3% and 54.3%, respectively, and those of silages was ranged from 58% to 64%. Ether extracts content of silages was significantly (P<0.05) increased in 6 weeks of fermentation period. The pH of silages ranged from 4.46 to 5.05, and fluctuated in the changes by fermentation period beside of decreased with elapsing the period in the S-60. The organic acid content of silages was higher in the order of lactic acid, butyric acid, acetic acid and propionic acid. Lactic acid content was higher when fermented for 6 weeks compared to the other fermentation period. Flieg's score for estimation of silage quality ranged from 63 to 80, and was relatively high level in the S-20 and the S-40 fermented for 6 weeks, and was high level in S-20, and was relatively low level in the silages fermented for 3 week. Hence, we suggest that supplementation of 20% spent mushroom substrates in fresh matter basis and fermentation for 6 weeks are resonable for a good quality of rye silage.

• Korean Journal of Poultry Science
• /
• v.21 no.1
• /
• pp.35-40
• /
• 1994

A dietary self-selection study was carried out to get information for the improvement of feeding systems of egg-type growing pullets. Corn diet, soybean meal diet, wheat bran diet and soybean meal+fish meal diet were individually prepared for self-selection regime and 380 day-old chicks of a brown egg strain were offered either a control grower diet(C) or one of the 3 self-selection regime consisted of corn-soybean meal diet ($T_1$), corn-soybean meal-wheat bran diet($T_2$) and corn-soybean meal+fishmeal-wheat bran diet($T_3$) during 20 weeks of the growing period. Compared with pullets fed control diet(C), those fed the self-selection diets($T_1$, $T_2$ and $T_3$) were smaller in body weight at 20 weeks of age by 12% and consumed less energy and protein by 11% and 9%, respectively. Calculated metabolizable energy levels of feed consumed during the growing period were about 3,200 kcal/kg in $T_1$ and 2,300 kcal/kg in $T_2$ and $T_3$ and dietary protein levels were about 12~13% in all self-selection diets ($T_1$, $T_2$ and $T_3$) regardless of pullet age. The results of the study suggest that the conventional feeding system of egg-type growing pullets should be improved in order to control the body weight effectively and to reduce the cost of grower feed.

• Korean Journal of Soil Science and Fertilizer
• /
• v.25 no.3
• /
• pp.231-241
• /
• 1992

To study the relationships between major micrometeorological elements and their influences on evapotranspiration(ET) in the canopy of two rice cultivars, Daecheongbyo and Samgangbyo, synoptic meteorological factors, micrometeorological elements and ET from the canopy and biomass production were observed at various growth stages in the paddy field of Suwon Weather Forcast Office in 1989. ET from the rice community was highly correlated with the following factors in order of pan evaporation>air temperature>leaf temperature>solar radiation>sunshine duration>difference in vapor pressure depicit(VPD)>water temperature. ET observed showed higher correlation with the evaporation from small pan than that from Class A pan. Varietal difference would be noted in the relationships between ET in Samgangbyo canopy and the evaporations observed from the pans, with which closer a correlation was found in Samgangbyo than in Daecheongbyo. The ratio of canopy ET to the evaporation from Class A pan was maintained over 1.0 through the growth stages with the maximum of 1.9 at the late August. The evaporation observed from Class A pan was amounted to 71.9% of that from small pan. ET was better correlated with solar radiation than with net radiation which reached about 66% of solar radiation. Maximum temperature showed higher correlation with ET than mean air temperature, and also wind speed of 1m above ground revealed positive correlation. The relative humidity, however, had no correlation with the exception of ET in rainy days. A regression model developed to estimate ET as a function of meteorological elements being described with $R^2$ of 0.607 as : $ET=-5.3594+0.7005Pan\;A+0.1926T_{mean}+0.0878_{sol}+0.025RH$.

• Journal of the Korean Wood Science and Technology
• /
• v.17 no.1
• /
• pp.3-11
• /
• 1989

This study was carried out to investigate the physical and mechanical properties. durability of adhesive bond and paint film for the basic data which were required to determine the suitability as a raw material for furniture the laminated veneer lumber (LVL) with pitch pine (Pinus rigida Mill). The results obtained were as follows; 1) The proper pressing time for making the LVL was over 45 second per milimeter of LVL thickness. 2) The bending strength of the LVL was lower than that of the solid wood but the compressive strength of the LVL was similar to that of the solid wood. The strength increased with the decrease of veneer thickness. 3) The impact bending absorbed energy of the LVL was 0 to 0.3 kg.m/$cm^2$ in the direction of parallel to the grain. The energy of the LVL was lower than that of the solid wood (0.68 kg.m/$cm^2$). 4) In warm water soaking and cold-dry tests, delamination of adhered layers surface crack, swelling, and color change were not found when the hot pressing time was over 45 second per milimeter of LVL thickness. As a result of soak under vacuum test shrinkage in the direction of parallel to the grain was about -1.0 percent and. was about 3.0 percent in the direction of the perpendicular to the grain. 6) The film cacks on the LVL's surface after the wet and cold-dry test were not found at all. 7) In the use of the LVL for interior decoration it was considered that the surface of the LVL be overlaid crossly with fancy veneers of birch and paulownia, etc. This cross overlayirg methods have resulted in few cracks on the fancy veneer.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.8
• /
• pp.147-158
• /
• 2004

Laboratory dynamic tests are carried out to assess the liquefaction potential of saturated sands in most countries. However, simple results such as the maximum cyclic shear stress and the number of cycles at initial liquefaction are used in the experimental assessment of liquefaction potential, even though various results can be obtained from the dynamic test. In addition, it seemed to be inefficient because more than three dynamic tests with different stress ratio have to be carried out to draw a liquefaction resistance experimental curve. To improve the present assessment method fur liquefaction potential, a new critical resistible characteristic far soil liquefaction is proposed and verified through conventional cyclic triaxial tests with Jumunjin sand. In the proposed method, various experimental data such as effective stress path, stress-strain relationship, and the change of excess pore water pressure can be used in the determination of cumulative plastic shear strains at every 1/4 cycle. Especially, the critical cumulative plastic shear strain to initiate liquefaction can be defined in a specific point called a phase change point in the effective stress path and it can be calculated from a hysteric curve of stress-strain relationship up to this point. Through this research, it is found that the proposed cumulative plastic shear strain can express the dissipated energy to resist dynamic loads and consider the realistic soil dynamic behavior of saturated sands reasonably. It is also found that the critical plastic shear strain can be used as a registible index of soils to represent the critical soil dynamic state, because it seems to include no effect of large deformation.

• Food Industry
• /
• s.181
• /
• pp.10-37
• /
• 2004

식용유지는 식용으로 이용할 수 있는 가시적인 상태의 액상(oil) 또는 고체상(fat)의 식용기름을 말하지만 식품산업 측면에서는 가시적인 상태의 유지(가시지방)뿐만 아니라 유지가공 식품이나 기타의 식품에 함유되어 섭취되는 비가시적인 상태의 유지(비가지 지방)도 포함될 수 있다. 식용유지는 생명을 유지하는데 없어서는 안될 영양소로서 탄수화물 단백질과 함께 3대 영양소 중의 하나이며 1g당 9kcal를 내는 고도로 농축된 에너지원이면서 필수지방산의 공급원이고 비타민 A, D, E 등의 지용성 비타민과 기타 특수한 영양성분의 운반체로서 높은 영양적 가치를 갖는다. 지방성분은 음식물로부터 섭취가 불가능할 경우에는 체내에서 탄수화물이나 단백질을 기질로 하는 대사과정에서 합성되어 지질 또는 필수지방산과 지용성 비타민은 식품으로 지방질과 함께 흡수되어야 하므로 식품의 한 성분으로 지방의 중요성을 인정받고 있다. 1960년대 이후 국민소득의 증가와 함께 식생활도 다양화되고 서구화 간편화되면서 지방 함량이 높은 식품과 유지를 이용한 식품의 소비가 증가하였고 전체적인 유지 소비량도 늘어나는 추세에 있다. 60년대 초에는 총열량 중 지방이 차지하는 비율이 $6\%$ 정도였으나 최근에는 급격히 증가되어 2000년말 현재 $25.5\%$로 증가하였다. 97년까지 계속 증가하던 공급 에너지량은 98년 IMF의 영향으로 2,799 kcal까지 감소했으나 99년 들어 IMF 이전 수준으로 회복되었다. 또한 연간 일인당 순 식용유지류 공급량은 1990년대 까지 급격히 증가하였으나 이후로는 소폭 증가하는 추세이다. 2000년말 현재 식용유지 총 공급량은 76만2 천톤으로써 99년 73만5 천톤에 비해 2.7만톤이 증가하였다. 1998년 IMF 시기를 제외하고는 공급물량은 계속해서 증가 추세이다. 특히 1998년도에 비하여 2000년도에 식물성 유지는 2배 가까이 증가하였으나, 동물성 유지는 절반 이하로 감소되는 추세이며 공급물량으로 보면 대두유, 팜유가 주요 유종으로 식물유지 전체에서 차지하는 비중이 $72.3\%$로 압도적이다. 라면용 튀김기름과 마가린 쇼트닝의 원료로서 대부분 사용되는 팜유를 제외하고 가정용 식용유의 대부분을 차지하는 대두유가 이처럼 식용유지 시장의 대부분을 차지하게 된 이유는 첫째, 90년대 초반 수입 자유화 이후 타 유종 대비 낮은 가격을 형성하여 유지업체가 수입을 늘린 것이고 둘째로는 국내에서 대두유와 대두박을 생산하는 대두가공업체의 안정적 대두유 공급이 주요 원인이라고 할 수 있다. 식용유지의 시장규모는 식품공전상 식용유지로 분류된 제품들의 2000년도 출하액으로 보면 약 6,616 억원 정도이다. 한편 유종이 단순했던 가정용 식용유지 시장이 최근 새로워지고 있다. 주로 조리용으로 사용했던 것에서 건강을 생각하는 품목으로 바뀌는 경향이다. 아직은 가정용에서 대두유가 가장 많지만 옥배유나 채종유 더 나아가 건강이미지의 식용유인 홍화유 올리브유 해바라기유등이 증가하고 있는 추세이다. 한편 기존 식용유가 비만의 원인인 것 때문에 기피되던 것에서 새롭게 다이어트용 식용유 제품이 출시되어 시장에 새 바람이 불고 있다. 일본 식용유지 시장규모는 물량으로 172 만톤, 금액으로는 2,786 억엔(약 2조7860 억원) 수준이다. 지난 10년간 증가율은 물량 측면에서 약 $5\%$정도 신장하고 금액으로는 큰 증감이 없었다. 식용유는 조리의 기초 소재로서 안정한 수요를 갖고 있지만 주요 유종인 샐러드유의 가격이 하락하여, 전체적으로 시장이 물량이 증가하면서도 매출액이 신장하지 못하여 시장규모는 축소되었다고 할 수 있다. 일본 식용유지 업계의 제품동향을 보면 거의 모든 업체가 가정용 시장에서 건강 기능성 식용유지를 출시하고 있다는 점이다. 물론 일본은 건강기능성 식품에 대한 제도적인 뒷 받침이 되어 있어 기능성 식품의 시장출시가 용이한 점이 가정용 시장에 큰 영향을 미쳤다고 볼 수 있다. 유지 산업의 고부가가치화를 위해서는 전통적인 산업의 제품과 기술만으로는 달성하기 어렵다. 국내와 일본 식용유지 업계의 경향을 참고해 볼 때 차별화된 식용유지 제품과 기술의 개발이 절실히 필요하다. 앞서 언급한 고부가가치 제품과 기술 관련 사향을 바탕으로 국내 유지분야가 중점적으로 연구할 분야를 선정해 보면 리파제의 고정화 연구, 생물공학 기술을 활용한 효소의 개발과 이를 이용한 유지 가공 기술 연구, 유지성분의 유화 안정화 기술 연구, 식용유지의 선택적 수소경화 기술 연구 트랜스 지방산 저감기술연구, 효소 반응조 설계기술 연구, 지질 분자구조 분석기술 연구 분야 등이 유망하다. 상기와 같은 연구 분야를 육성하기 위해서는 유지 전문 인력의 육성, 해외 네트웍의 구축, 산학연 공동연구 추진, 국가적 차원의 정책 및 지원 등이 절실하다.