• Journal of Ocean Engineering and Technology
• /
• v.33 no.6
• /
• pp.573-580
• /
• 2019

A submerged breakwater is a coastal structure built under water with excellent landscape. The depth of the crest of the breakwater should be maintained at more than a certain level in order for the submerged breakwater to control waves properly. This means that the effect of blocking waves deceases sharply at high tide in coastal areas with large tidal differences. In this study, we proposed a Tide-Adapting Submerged Breakwater (TA-SB) to overcome this problem, and then we conducted hydraulic model experiments to evaluate the performance of the TA-SB for controlling waves. The experimental results showed that the tapered wings attached to the crest of the TA-SB helped induce forced breaking waves. In particular, they were very effective in blocking waves and attenuating wave energy at high tide. In addition, the wave control performance of the proposed TA-SB was far superior to the Tide-Adapting Low-Crested Structure (TA-LCS) of the previous study.

• Resources Recycling
• /
• v.28 no.6
• /
• pp.9-17
• /
• 2019

The use of rare metals in increasing along with the growth of the Fourth industrials revolution and new energy industries, and the recycling of rare metals becomes more important as the used of rare metals increase. In this paper, the domestic and international quality standards of tin metal, one of the rare metals, and the performance test of recycled tin were investigated. As a results of the performance test, it was analyzed that there is no difference in performance between the natural and recycled tin.

• Current Photovoltaic Research
• /
• v.6 no.2
• /
• pp.49-55
• /
• 2018

Recently solar cell industry needs the optimal design of Czochralski process for low cost high quality silicon mono crystalline ingot. Because market needs both high efficient solar cell and similar cost with multi-crystalline Si ingot. For cost reduction in Czochralski process, first of all energy reduction should be completed because Czochralski process is high energy consumption process. For this purpose we studied optimal water-cooling tube design and simultaneously we also check the quality of ingot with Von mises stress and V(pull speed of ingot)/G(temperature gradient to the crystallization) values. At this research we used $CG-Sim^{(R)}$ S/W package and finally we got improved water-cooling tube design than normally used process in present industry. The optimal water-cooling tube length should be 200mm. The result will be adopted at real industry.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.195.2-195.2
• /
• 2016

대기압 플라즈마는 공기중에서 방전이 가능하고, 이때 생성되는 활성산소종(ROS)과 활성질소종(RNS)을 적절히 이용하면 살균은 물론 제독이 가능하다. 특히 신경작용제나 수포작용제 등의 화학물질은 박테리아 포자, 세균, 바이러스 등의 생물작용제에 비해 더 많은 에너지와 시간이 요구된다. 현재 군이나 의료 시설에서는 과산화수소를 이용한 제독이나 염소계 표백제 성분으로 구성된 수용성 제독제를 이용하지만, 플라즈마의 경우는 단순히 기체를 방전하여 제독에 이용할 수 있으므로 보다 제독 시스템을 간단하게 구성할 수 있다. 하지만 대기압 방전시 방전전압을 낮추기 위해 헬륨과 알곤등의 기체를 공급하여 사용할 경우 부가적인 시스템의 규모가 커져 활용에 제한이 따른다. 따라서 본 연구에서는 대기중에 존재하는 질소, 산소 등을 이온화시키기 위해 10-25kHz의 주파수에서 4.5kV의 8us 펄스전원을 인가하여 공기 플라즈마를 얻고, 열에 의한 분해효과를 제거하기 위해 플라즈마의 기체온도를 20도로 유지시켰다. 플라즈마의 특성은 방출광 분석법을 이용하여 떨림온도를 계산하였고, 질소와 오존의 농도를 동시에 관찰하였다. 분해된 화학작용제는 기체분석기(Gas Chromatography)를 통해 표준 오염농도대비 잔류한 양을 측정함으로써 제독효율을 계산하였다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.1
• /
• pp.157-163
• /
• 2017

This system is a diagnosis system that checks whether it causes a partial discharge of a power cable or not. PD(Partial Discharge) is detected by FBDS(Frequency Band Detection Sensor). That is, it means a acoustic sensor capable of detecting each frequency band. The wave shape of PD sound is similar to noise and is systematically generated by partial discharge. Therefore, in this paper, we could discriminate between normal and abnormal case using relative level crossing rate(RLCR) and spectrogram of frequency energy rate.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.11
• /
• pp.683-689
• /
• 2015

For the formation of $N^+$ doping, the antimony ions are mainly used for the fabrication of a BJT (bipolar junction transistor), CMOS (complementary metal oxide semiconductor), FET (field effect transistor) and BiCMOS (bipolar and complementary metal oxide semiconductor) process integration. Antimony is a heavy element and has relatively a low diffusion coefficient in silicon. Therefore, antimony is preferred as a candidate of ultra shallow junction for n type doping instead of arsenic implantation. Three-dimensional (3D) profiles of antimony are also compared one another from different tilt angles and incident energies under same dimensional conditions. The diffusion effect of antimony showed ORD (oxygen retarded diffusion) after thermal oxidation process. The interfacial effect of a $SiO_2/Si$ is influenced antimony diffusion and showed segregation effects during the oxidation process. The surface sputtering effect of antimony must be considered due to its heavy mass in the case of low energy and high dose conditions. The range of antimony implanted in amorphous and crystalline silicon are compared each other and its data and profiles also showed and explained after thermal annealing under inert $N_2$ gas and dry oxidation.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.8
• /
• pp.1201-1207
• /
• 2008

Numerical analysis information will be very useful to improve fluid system. General information about an internal gas flow is presented by numerical analysis approach. Relating with hydrogen compressing system, which have an important role in hydrogen energy utilization, this should be a useful tool to observe the flow quickly and clearly. Flow characteristic analysis, including pressure and turbulence kinetic energy distribution of hydrogen gas coming to the cylinder of a reciprocating compressor are presented in this paper. Suction-passage model is designed based on real model of hydrogen compressor. Pressure boundary conditions are applied considering the real condition of operating system. The result shows pressure and turbulence kinetic energy are not distributed uniformly along the passage of the Hydrogen system. Path line or particles tracks help to demonstrate flow characteristics inside the passage. The existence of vortices and flow direction can be precisely predicted. Based on this result, the design improvement, such as reducing the varying flow parameters and flow reorientation should be done. Consequently, development of the better hydrogen compressing system will be achieved.

• Journal of the Korean Vacuum Society
• /
• v.10 no.3
• /
• pp.350-355
• /
• 2001

We have investigated characteristics of ZnSe epilayer grown by molecular beam epitaxy(MBE) on semi-insulating(SI) GaAs by using surface photovoltage(SPV). The measurements of SPV were performed with illumination intensity and modulation frequency. The bandgap energy of ZnSe epilayer was determined from derivative surface photovoltage (DSPV). The five states were observed at room temperature(RT), and those states relate to the impurity and defect formed hetero-interface of ZnSe and GaAs during the sample growth. The observed states represented as a tendency of typical extrinsic transition on the increasing illumination intensity. The 1s and 2s signals related to the excitonic absorption were not observed at RT, but those were presented with the splitted of two peaks in the SPV at 80 K. From the modulation frequency dependence, we obtained the junction conductance and capacitance of the sample.

• Radiation Oncology Journal
• /
• v.10 no.1
• /
• pp.115-120
• /
• 1992

A mathematical model is presented for the calculation of the depth absorbed dose in water Phantom irradiated by high energy Photon beam (10MV X-ray), based on transport theory. The parameters of this model are obtained from the experimental values which were simulated by non-linear regression process method. The calculated absorbed dose distribution is extended to 3-D by using trial function from beam profile field sizes, SSD and depth in water phantom irradiated by high energy Photon beam. The calculated values using this model are in good agreement with the measured values.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.6
• /
• pp.1190-1194
• /
• 2000

과열 수증기 공정처리 효과가 현미의 수화 및 조직특성에 미치는 영향을 조사하기 위하여 현미(동진)를 과열수증기의 압력이 $1kg_{f}/$\textrm{cm}^2$$로 유지되는 상태에서 수증기의 온도를 127, 150, 16$0^{\circ}C$로 달리하면서 과열 수증기 처리를 하였다. 수분흡수속도는 수침온도(60~8$0^{\circ}C$)에 따라서 현미와 백미가 각각 0.03569~0.1049 $cm/min^{-1/2}$와 0.03474~0/1618 $cm/min^{-1/2}$의 범위를 보였다. 현미와 백미의 활성화에너지는 각각 6.98 및 9.59 cal/mole을 나타내어 열수화 특성이 다름을 보였다. 한편, 과열 수증기 처리현미의 경우 $65^{\circ}C$에서의 확산계수는 18.96$\times$$10^{-5}$$\textrm{cm}^2$/min)와 처리하지 않은 현미(22.28$\times$$10^{-5}$$\textrm{cm}^2$/min)의 중간 값을 나타내었다. 과열 수증기처리 후 현미의 표면조직은 균열이 발생하였는데, 수증기 온도가 높을수록 균열의 정도가 컸다. 이상과 같은 수증기 처리는 현미 강층의 구조를 변화시킬 뿐만 아니라, 내부 전분층의 부분적 균열에도 효과적으로 작용하는 결과를 보인 것으로 예측된다.