• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1948-1950
• /
• 2004

가속기 연구소에서 개발한 고전압 대전류용 Seal-off TVS (Triggered Vacuum Switch)의 특성을 시험 하는 것을 목적으로 하고 있다. 제작한 TVS는 양전극과 음전극이 교대로 고정된 간격으로 각각 3개의 전극으로 배열되어 있으며 전극은 사다리꼴 모양으로 되어있고 트리거 시스템과 개스를 흡수하는 게터가 내부에 설치되어 있다. 제작한 스위치 내부는 약 $10^{-7}$ torr의 진공상태를 유지하고 있으며 세라믹 챔버를 사용하여 Seal-off 상태로 설계, 제작하였다. 스위치 시험장치는 200 ${\mu}F$, 22 kV 6개를 병렬로 연결한 커패시터 뱅크와 $20{\mu}H{\sim}160{\mu}H$의 탭변환 인덕터와 $0.1{\Omega}{\sim}0.5{\Omega}$ 의 저항을 이용하여 시험 장치를 구성하였다. TVS의 시험에서 에너지 최고 전달량은 74 C 이었으며 이때 인가전압은 30 kV, 최대 전류는 100 kA, 펄스폭은 1${\sim}$2 ms이었다. 본 논문은 제작한 스위치의 전기적인 특성 시험한 결과에 대하여 논하고자 한다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.3 no.3
• /
• pp.21-26
• /
• 2002

This paper presents the new approach of identifying human emotional states such as anger, happiness, normal, sadness, or surprise. This is accomplished by using discrete duration continuous hidden Markov models(DDCHMM). For this, the emotional feature parameters are first defined from input speech signals. In this study, we used prosodic parameters such as pitch signals, energy, and their each derivative, which were then trained by HMM for recognition. Speaker adapted emotional models based on maximum a posteriori(MAP) estimation were also considered for speaker adaptation. As results, the simulation performance showed that the recognition rates of vocal emotion gradually increased with an increase of adaptation sample number.

• Journal of the Korean Magnetics Society
• /
• v.6 no.1
• /
• pp.1-6
• /
• 1996

To simulate the characteristics of magnetic exchange coupling at the interface of MR/TbCo thin films, the directions of magnetizations were calculated by minimizing energy in the films. Newton method and Gauss-Seidel method were used. The width of M-H curve increased with TbCo anisotropy constant, and with the thickness of the transition region of TbCo layer. Hysteresis loop width became extremely narrow (less than 10 Oe of coercivity), when the TbCo transition region length was $400\;\AA$. Also the hysteresis loop of films with low interfacial exchange coupling constant was similiar to that of short transition region length. When interfacial exchange coupling constant was 1/100 of perfect coupling, hysteresis loop showed a coercivity of less than 10 Oe. Comparing the measured hysteresis loop of a fabricated sample with that of simulated one, exchange coupling con¬stant could be estimated.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.8
• /
• pp.601-604
• /
• 2010

In this study, the piezoelectric energy harvester was investigated employing the pillar structure with the diameter size of 50~500 um. Usually, the aspect ratio between the height and diameter was related with the piezoelectric performance. High aspect ratio was showed the low electric noise and high piezoelectric properties than low aspect ratio. Therefore, we have selected the Su-8 photo-resist and modified lithography process to manufacture the pillar structure with height above the 250 ${\mu}m$. In this presentation, we will report the process and properties of micro pillar structure based on the PMN-PZT (Pb$(Mg_{1/3}Nb_{2/3})O_3$-PbZrTiO$_3$) materials.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.403-403
• /
• 2012

그래핀(graphene)은 우수한 전기적, 물리적인 특성을 지닌 물질로써 다양한 분야에서 이를 활용하려는 노력들이 활발히 진행되고 있다. 그중 그래핀을 채널로 이용하는 전계효과 트랜지스터(field effect transistor)로의 응용에 있어, 가장 핵심적인 도전과제는 전하농도(carrier concentration)의 제어 및 에너지 밴드갭(energy bandgap) 형성이라 할수 있다. 최근 다양한 물질을 이용한 도핑을 통해 이를 해결하기 위한 노력들이 진행되고 있는 추세이다. 본 연구에서는 열화학 기상 증착법(Thermal chemical vapor deposition)을 통해 합성된 단일층의 그래핀에 염화니켈 나노입자의 분산액을 스핀코팅 한후 열처리를 통해 그래핀-니켈 나노입자의 하이브리드 구조를 제작하였다. 제작된 그래핀-니켈 나노입자 하이브리드 물질의 구조적 특징을 주사 전자 현미경(Scanning electron microscope)과 원자힘 현미경(Atomic force microscopy)을 통하여 확인하였다. 또한 니켈 분산액의 농도와 도핑효과 와의 상관관계를 라만분광법(Raman spectroscopy)과 이온성 용액법(Ionic liquid)을 이용한 전계효과 특성분석을 통해 조사하였다. 나노입자의 형성 메커니즘은 X-선 광전자 분광법(X-ray photoelectron spectroscopy)을 통하여 규명하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.1 no.1
• /
• pp.64-72
• /
• 1997

An analytical study has been performed to investigate the unsteady ignition characteristics of pulse combustion. In many combustion applications, strain rate of the flow can significantly affect the combustion features; ignition, extinction, and reignition. In the pulse combustion, two jets (hot combustion gases and fresh mixtures) coming from the opposite side of the combustor will collide in the combustor forming a stagnation region where the chemical reaction is suppressed by the strain rate until this becomes below the critical value. In this research, the method of large activation energy asymptotic is adopted with one step irreversible kinetics to examine the ignition response to the periodic variation of the strain rate of flow. The results show the variation of the maximum value of strain rate can determine whether the ignition or extinction occur.

• Journal of the Korean Chemical Society
• /
• v.55 no.3
• /
• pp.341-345
• /
• 2011

The Schiff base cobalt(II) complex, bis[4-chloro-2-((E)-(isopropylimino) methyl) phenol]cobalt(II), has been prepared and characterized by single-crystal X-ray diffraction analyses. The phenomenological, kinetic and mechanistic aspects of the cobalt (II) complex have been studied by TG/DTG techniques. On the basis of the experimental data, the kinetic parameters such as activation energy, pre-exponential factor and entropy of activation were computed, and then the most probable mechanism function was estimated as $g({\alpha})={\alpha}^2$ 2. Hence the rate controlling process at all stages of decomposition is onedimensional diffusion (Parabolic model).

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.3
• /
• pp.321-328
• /
• 2000

An improved formulation of thin-wailed curved beams with variable curvatures based on displacement field considering the second order terms of finite semitangential rotations is presented. From linearized virtual work principle by Vlasov's assumptions, the total potential energy is derived and all displacement parameters and the warping functions are defined at cendtroid axis. In developing the thin-walled curved beam element having eight degrees of freedom per a node, the cubic Hermitian polynomials are used as shape functions. In order to verify the accuracy and practical usefulness of this study, free vibrations and buckling analyses of parabolic and elliptic arche shapes with mono-symmetric sections are carried out and compared with the results analyzed by ABAQUS' shell element.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.7
• /
• pp.75-79
• /
• 1999

The beam patterns of source array and changes in the far-field signatures are compared and analyzed each other in order to identify the seismic capability affected by the misfired source at the multi-channel seismic source array. In the primary pulse amplitude of far-field signature, the 66% of seismic capacity are sustained if approximately 40% of source are misfired among whole gun volume. When the sources with the same distances are misfired at the 154㎐, the beam width of the long- and wide-array which is identical regardless of arraying pattern. The beam width has a tendency to narrow now from 41 to 34 according to increase the volume of misfired source at the long-array beam pattern. Therefore, the source array of small volume are suitable for the shallow seismic survey because of producing adequate beam patterns with narrow beam width.

• Journal of the Korean Chemical Society
• /
• v.20 no.3
• /
• pp.193-197
• /
• 1976

The ultrasonic absorption has been measured in aqueous solution of dodecyl pyridinium chloride (DPC) at $20^{\circ}C$ over the frequency range of 0.1${\sim}$90 Mc.The excess absorption was observed only in solutions in which the concentration was higher than the critical micellar concentration(cmc). The mechanism for this feature was attributed to the reaction $M_2\;{\rightleftharpoons}\;M_1\;＋\;1.2Cl^-$ Where $M_2$ and $M_1$ and M1 are two types of micelle. The rate constants of the forward and the reverse reactions were $6.6{\times}10^5 sec^{-1}\;and\;2.7{\times}10^11sec^{-1}mol^{-1.2}$respectively. Some kinetic charateristics including the free energy, enthalpy and entropy were calculated.