• The Korean Journal of Zoology
• /
• v.34 no.3
• /
• pp.403-409
• /
• 1991

화학적 암 유발물인 diethylnitrosamine(DENA) 연여로 야기되는 흰쥐 (Sprague Dawley) 간세포의 변화 양상을 전자현미경과 silver염색방법으로 관찰하였다. DENA는 간세포내의 핵, 미토콘드리아, 담즙관에 뚜렷한 형태적 변화를 일으켰으며 인(nucleolus)의 크기와 수도 증가하였다. 또한 정상세포보다 인 (nucleolus) 부위의 염색 정도도 강하였는데 이것은 silver granule이 서로 연결되어 망상구조를 형성하기 때문인 것으로 생각되며 이들 망상구조는 순수한 rDNA부분과 핵내 단백질이 인내에서 서로 엉킨어 나타나는 현상일 것으로 사료된다. 또한 DENA투여 켤과 나타난 인의 크기와 인부위의 수적 증가현상의 결과로 rRNA 합성물의 변화를 유추할 수 있었다.

• Journal of Sericultural and Entomological Science
• /
• v.7
• /
• pp.81-87
• /
• 1967

This report was prepared to find the causes of breaks during the winding operation and the obtained results were as followings. 1. Among around kinds of breaks, the percentage of breaks on the silk thread in our country was that injured and damaged thread was 43.23% where as hard gum spots of 16.07% split thread of 11.70%. and disturbed one of 7.22% were found. 2. It was known that the breaks percentage between Spring cocoon and Autumn cocoon bad the difference. 3. Microscopic observation of the spots of breaks were separately made, and the sccurted causes were observed to prevent the admajor defects.

• The Korean Journal of Rheology
• /
• v.4 no.1
• /
• pp.52-61
• /
• 1992

초고분자량 폴리에틸렌을 파라 크실렌에 녹인 희박 용액에 전단흐름을 가해 섬유를 뽑아내는 방법에 대해 연구하였다. 표면성장이라 불리는 이 방법을 용액내에서 회전하는 rotor 의 표면에 흡착된 젤 층에, 결정성이 강한씨(seed)를 접촉시킴으로써 엉킨 분자쇄들이 전단력에 의해 신장되어 분자의 자유에너지가 증가하도록 하여 연속적으로 고강력, 고탄성 률 결정을 뽑아내게 한 것이다. 이표면성장법으로 섬유를 얻는데 있어서 결정화온도 rotor 속도, 권취속도 및 고분자 농도와 같은 결정화 변수를 변화시키면서 섬유의 물리적 성질에 미치는 영향을 관찰하였다. 이방법으로 섬유를 성장시키면 열역학적 평형온도(118.6$^{\circ}C$) 이상 인 12$0^{\circ}C$에서 성장시켰을 때 133GPa의 인장 탄성계수 3.1%의 절단신도에서 5.04GPa의 고 강력을 갖는 섬유를 얻을수 있었다. 또한 이방법에 있어서는 결정화 온도가 물리적 성질에 가장 큰 영향을 미치는 인자로 작용하였다, 고분자 농도의 영향은 0.7wt.% 이상에선 물리적 성질이 더 이상 개선되지 않았으며 오히려 장력의 증가로 불안정한 성장을 보였다. 또한 0.5wt%이하에서는 젤층의 형성이 둔화됨을 볼수 있었다. 결국 물리적 성질의 측면에서 볼 때 0.5~0.7wt%에서 최적조건을 보여주었다.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.5
• /
• pp.513-519
• /
• 2013

Line scan camera has been widely used in the area of inspection of glass, film, fabric, iron, PCB and etc. due to the high resolution and the high speed. We developed the line scan based vision system to inspect tangled and cut-off status of yarn in the manufacturing process. The original image is binarized with a proper threshold, and the gap distances in the yarn are measured in real time, so finally the status of the process is decided by the maximum value of the gap distance. All procedures are executed in real time by realization of multi-processed threads. By implementation of this system, the error of the yarn in manufacturing process can be precedently monitored and the loss of the yarn is decreased efficiently.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.808-811
• /
• 2007

본 연구는 3톤/일급 이하 가스화 용융로에서 $1,400{\sim}1,500^{\cdot}C$, $7.5{\sim}8.0$ kg/$cm^2$의 안정적인 운전조건일 때, 시료로 Kideco 탄을 사용하고 이때 발생한 슬랙의 특성 및 슬랙의 재활용을 위한 벽돌제조 특성을 고찰하였다. 발생된 슬랙은 $Fe_2SiO_4$와 $SiO_2$가 결정상태로 일부 존재하거나, 중금속들이 결합되어 엉킨 구조인 비결정상태의 치밀한 형태로 이루어져 있었으며, 잔존탄소 함량이 0.06%로 미량 존재하였다. 또한 슬랙에는 중금속 농도가 Kideco탄보다 고농도로 존재하지만, 용출되는 중금속의 농도는 매우 낮아 환경적으로 안정한 물질로서 재활용이 가능한 특성을 지니고 있다. 슬랙 첨가 점토벽돌의 적합성을 평가하기위해 슬랙을 0%, 10%, 30% 첨가하여 벽돌을 제조하고 KS 산업규격에 따라 시험을 실시하였다. 분석결과 슬랙을 첨가할수록 제조한 벽돌의 흡수율이 낮아져 기존 제품에 비하여 우수한 것으로 측정되었다. 또한 압축강도와 휨강도는 기존 제품의 $80{\sim}86%$ 정도인 것으로 측정되었지만 KS 산업규격의 기준치보다 높은 수치를 나타내였고, 내산성, 내알칼리성, 열충격강도 또한 양호한 것으로 나타나, 슬랙을 이용하여 벽돌로 재활용하여 충분히 사용 가능한 것으로 확인되었다.

• Journal of KIISE:Software and Applications
• /
• v.35 no.7
• /
• pp.424-430
• /
• 2008

Identifying crosscutting concerns during requirements engineering phase is one of the most essential parts in Aspect-Oriented Software Development. Considering crosscutting concerns in the earlier phase of the development improves consistency among requirements so that it can help maintain software systems efficiently and effectively. It also provides a systematic way to manage requirements changes by supporting traceability throughout the software lifecycle. Thus, identifying tangled and scattered concerns, and encapsulating them into separate entities must be addressed from the early phase of the development. To do so, first, functional and non-functional concerns must be clearly separated. Second, a pointcut where a main concern meets crosscutting concerns should be defined and specified precisely. Third, it is required to detect conflicts being occurred during composition of crosscutting concerns from the earlier phase. Therefore, this paper proposes a systematic approach to identifying and specifying crosscutting concerns using goal-scenario based requirements analysis. And we demonstrate the applicability of the approach by applying it into the intelligent service robot system.

• Journal of the Korean Institute of Gas
• /
• v.8 no.3 s.24
• /
• pp.24-30
• /
• 2004

Gas hydrate formation process is studied in this paper. Natural gas was introduced into both pure water and water added anionic surfactant(promotor) at 276.65 K and 6 MPa. Gas hydrate nuclei was easily generated by instantaneous agitation. Gas hydrate film was formed on the interface of water and gas. The very thin film which was instantly covered the surface of the water, followed by generation of the clear film layer. Whiskery crystal of gas hydrate was created more actively in the water added naionic surfactant than in the pure water. Whiskery hydrate formed in the pure water looks like short and thick thread colony while the one shoes long and thin thread colony in the water added promoter.

• Journal of the Korean Society of Radiology
• /
• v.17 no.2
• /
• pp.223-230
• /
• 2023

This study attempted to concider the morphological change of red blood cells after whole body irradiation. Blood samples used red blood cells of white mice and mouse after irradiation. Transmission electron microscope observation results, Anisocytosis was observed in red blood cells 20 days after 5 Gy irradiation. Triangle and tetrapod were observed for small red blood cell types. Poikilocytosis, sickle-shaped Drepanocyte, and Acantocyte were observed in general-sized red blood cells. Schizocyte was observed in red blood cells 20 days after 7 Gy irradiation. Scanning electron microscope observation results, Dacryocyte was observed with microcytes. It was also confirmed that red blood cells were get tangled with each other. In addition, polygonal shapes and half-moon shapes were also observed. In conclusion, it is judged that the modified form of pathological study is more important than the numerical change in the study of red blood cells by radiation exposure. In conclusion, it was confirmed that modified morphological studies are more important than numerical changes in the study of red blood cells by radiation exposure.

• Cartoon and Animation Studies
• /
• s.49
• /
• pp.493-519
• /
• 2017

Looking back at the last 10 years of the enactment of the Game Industry Act, the law was revised as a regulation rather than a promotion of the game. The objective of this study is to investigate where game regulation originated and derived through the history of those, and to find out what areas were missed, and to solve the tangled threads by regulation. For this purpose, we reviewed the implications of 10,000 won per hour, and discussed alternatives. Data were collected and analyzed on the basis of a review of regulatory literature and in - depth interviews with experts. When regulating games, we found that the side effects were further amplified by simply regulating the amount. Especially, we found that the vicious cycle in which functions such as indication, hit repeatedly, and automatic progress are made and immediately following prohibited is repeated. The point at which there is a sharp interest between the game user and the game operator in the game progression is the 'reward ratio for betting'. This is the key to protecting users. This could be a regulation considering the mechanism of the game. If the regulatory paradigm shifts in the future due to game regulations that take into account the 'reward ratio for betting' in the future, it is expected to minimize the side effects of price regulation and create a sound game ecosystem.

• Journal of the Korean Vacuum Society
• /
• v.20 no.3
• /
• pp.211-216
• /
• 2011

In this study, the effects of growth temperature on structural and optical properties of hydrothermally grown ZnO nanorod arrays have been investigated. Zinc nitrate ($Zn(NO_3)_2$) and hexamethylenetetramine were used as precursors. The ZnO buffered Si(100) with a thickness of 40 nm was used as the substrates. The ZnO nanorods were grown on these substrates with the temperature ranging from 55 to $115^{\circ}C$. The results were characterized by scanning electron microscope, X-ray diffraction and room temperature photoluminescence measurements. Well-aligned ZnO nanorods arrays were obtained from all samples. The tips of nanorods were flat when the temperature was less than $95^{\circ}C$, and the sharp-tip nanoneedle-like morphologies were obtained with the temperature of $115^{\circ}C$. In addition, some bundles were on the nanorods arrays with $115^{\circ}C$ due to the non-equilibrium growth. The growth temperature could affect the crystal and optical properties of ZnO. For the effects on crystal properties, the intensity of (002) peak was increased as the temperature was increased to $75^{\circ}C$, then decreased as the temperature was further increased to $115^{\circ}C$. As for the effects on optical properties, the intensity ratio of UV peak to visible peak is increased with the temperature increasing and the strongest UV peak intensity was obtained with the growth temperature of $95^{\circ}C$.