• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.3
• /
• pp.301-310
• /
• 2017

Quantum-dot cellular automata(QCA) is an alternative technology for implementing various computation, high performance, and low power consumption digital circuits at nano scale. In this paper, we propose a new universal gate in QCA. By using the universal gate, we propose a novel XOR gate which is reduced time/hardware complexity. The universal gate can be used to construct all other basic logic gates. Meanwhile, the proposed universal gate is designed by basic cells and a rotated cell. The rotated cell of the proposed universal gate is located at the central of 3-input majority gate structure. In this paper, we propose an XOR gate using three universal gates, although more than five 3-input majority gates are used to design an XOR gate using the 3-input majority gate. The proposed XOR gate is superior to the conventional XOR gate in terms of the total area and the consumed clock because the number of gates are reduced.

• Polymer Science and Technology
• /
• v.15 no.3
• /
• pp.363-373
• /
• 2004

1980년대 초, IBM의 과학자들에 의해 양자역학 현상에 기초한 새로운 현미경이 발명되었다. 뾰족한 금속 팁에 전압을 걸고 전도성 시료의 표면에 접근시키면, 팁이 표면에 접촉하기 직전에 터널링에 의한 전류가 흐르게 된다. 이 전류는 거리에 매우 민감해서 고체 표면에 배열된 원자들에 의해 형성되는 표면 굴곡 (surface corrugation)이 분간 가능하였다. 이 기계가 바로 STM (Scanning Tunneling Microscope)이다 (그럼 1). 이 발명이 있기까지의 약 2세기 가량의 시간 동안 "누구에 의해서도 결코 감지된 적 없는" (H. J. Robinson, Physics Today, March, 24, 1984.) 원자와 분자는 과학자들의 논리 속에 이론상으로 존재할 뿐이었다. STM의 발명으로 인해 인류는 바야흐로 개개의 원자와 분자를 직접적으로 감지할 수 있게 되었던 것이다. 처음으로 STM을 이용하여 원자해상도로 본 표면은 실리콘의 안정한 표면인 Si (111)-7${\times}$7 표면이었는데, 이러한 실리콘 표면의 STM 사진의 예를 그림 2에 나타내었다. (중략)타내었다. (중략)

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.7 no.3
• /
• pp.5-11
• /
• 1970

Some of the coding method have been discussed by extracting characteristics from vowels and consonants of Korean characters. given letters were sampled through 3$\times$5 mesh and also constituted first matrix system which taken subpatterns of vertical Conponent as variables and then, characteristics of the letters are extracted from the second matrix system expresses by common characteristics which are combined-with first one. Single coding was obtained by scanning the characteristic pattern. a good agree between theoretical values and their measurements and the reproducing of all vowels and consonants of Korean chasacters about coding were certified on the display designed.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1993.05a
• /
• pp.61-61
• /
• 1993

20세기 막바지에 들어 서면서 21세기를 바라보는 정보화사회는 어떠한 과학기술의발전을 필요로 하는 것일까? $10^{12}$ 집적도, $10^{-8}$cm 원자공간, $10^{-12}$-$10^{-15}$ 초등 시간대역에 대한 도전과[ 테라바이트 메모리], [테라바이트 컴퓨터], [테라비트 광통신] 등을 앞세우면서 고속화, 대용량화, 초미세화, 다기능화, 고기능화, 지능화를 지향하는 미래 정보통신 기술 실용화를 위하여서는 어떠한 성질의 신소재들이 개발되어야 할 것인가? [20세기 전자시대] 의 대표적 정보운반자인 [전자] 에 대한 연구는 21세기에는 어떻게 전개될 것인가? 새로운 정보운반자로서 부상하고 있는 [광자],[뉴런],[생체분자]등에 대한 연구는 어떠한 방향으로 전개될 것인가? 신개념의 정보통신 기술을 구체적으로 실용화 하기 위하여 연구되어야 할 신소재는 어떻게 전개되어야 할 것인가\ulcorner 초미세구조, 양자효과, 비선형효과, 원자가공, 원자조작, 인공신소재, 초격자 지능신소재, 초전도 유기물, 분자, 광논리, 광신경망, 생체노리, 생체컴퓨터등 신개념의 창출로부터 비롯해서 의료, 복지, 장애. 기후. 환경. 지각.해양. 항공. 우주에 이르는 다차원적 통신과 지능형 정보를 가능케 하는 신소재 연구의 조건들과 그에 따른 도전을 전망해 본다.에 따른 도전을 전망해 본다.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.11
• /
• pp.144-151
• /
• 1998

In this paper, it is applied the analysis properties of mathematical morphology in order to process MIN/MAX operation on the basis of combination of predefined and weighted structuring element to FCNN having the structure of CNN combined with fuzzy logic between template and input/output. In this paper, as the fuzzy estimator is applied to the image including noise, thus it could be found the noise removal as well as the edge detection in the process of computer simulation. We could analyze and compare the results of edge detection using FCNN, CNN and median filter to which the erosion operation of morphology is applied. This paper could apply the static template and the variable template to FCNN using the quantization fuzzy function, in result we could confirm that the performance of FCNN got to improve in the process of computer simulation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.05a
• /
• pp.420-424
• /
• 1999

In this paper, an optical switching circuit and several types of all-optical transmitter/receiver circuits which are configured with photodiodes, multiple quantum-well(MQW) optical modulators, and field-effect transistors(FETs) were simulated using PSPICE and their results of these are examined and discussed. 20 $\mu\textrm{m}$ ${\times}$ 20 $\mu\textrm{m}$ of window size was used for the optical modulators and 100 $\mu\textrm{m}$ wide FETs with the transconductance value of 55 mS/mm were used for the simulations. Simulation results clearly show that in order for the high speed operation of the all-optical circuits, the size of each device should be minimized to reduce the parasitic capacitance, the circuits should be designed to operate at the wavelength where the resposivity of photodiodes becomes the maximum peak, and the use of short, high-intensity input optical signal beams is very advantageous.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.6
• /
• pp.34-42
• /
• 2014

This paper presents a low-complexity and high-throughput symbol detector for two-spatial-stream multiple-input multiple-output systems based on the modified maximum-likelihood symbol detection algorithm. In the proposed symbol detector, the cost function is calculated incrementally employing a multi-cycle architecture so as to eliminate the complex multiplications for each symbol, and the slicing operations are performed hierarchically according to the range of constellation points by a pipelined architecture. The proposed architecture exhibits low hardware complexity while supporting complicated modulations such as 256 QAM. In addition, various modulations and antenna configurations are supported flexibly by reconfiguring the pipeline for the slicing operation. The proposed symbol detector is implemented with 38.7K logic gates in a $0.11-{\mu}m$ CMOS process and its throughput is 166 Mbps for $2{\times}$3 16-QAM and 80Mbps for $2{\times}3$ 64-QAM where the operating frequency is 478 MHz.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.3
• /
• pp.291-300
• /
• 2017

Quantum-dot cellular automata(QCA) is a computing model designed to be similar to cellular automata, and an alternative technology for next generation using high performance and low power consumption. QCA is undergoing various studies with recent experimental results, and it is one of the paradigms of transistors that can solve device density and interconnection problems as nano-unit materials. An XOR gate is a gate that operates so that the result is true when either one of the logic is true. The proposed XOR gate consists of five layers. The first layer consists of OR gates, the third and fifth layers consist of AND gates, and the second and fourth layers are designed as passages in the middle. The half adder consists of an XOR gate and an AND gate. The proposed half adder is designed by adding two cells to the proposed XOR gate. The proposed half adder consists of fewer cells, total area, and clock than the conventional half adder.

• 기호학연구
• /
• no.54
• /
• pp.205-224
• /
• 2018

This research is to investigate the way to combine Peirce's typology of signs with architectural design. A new diagram is suggested to ensure the continuity of Peirce's typology, by rearranging and reconstructing the well known inverted triangle diagram showing the structure of the typology. The new diagram is easier to understand the organization of the typology, by showing the linkages between sign types and their relationships with other types. A way to adapt the new diagram to architectural design for the purpose of representing typology as well as ensuring model growth as semiotic model for architectural design model. The new model is organized of three sign clusters, sinsign cluster, legisign cluster, and symbolic cluster. They are interrelated through successive inclusion and case inclustion. The new model is organized of threefold layers. The first layer is internal structure of each cluster. The second is interrelation between cluster. The third is mediation of symbolic cluster between sinsign cluster and legisign cluster. This paper investigate and demonstrate the possibility of adaptation of the new model in architectural design. It has been argued that the theoretical basis of sign typology is adaptable to architectural design by principle. More future research issues are discussed.

• Journal of Advanced Navigation Technology
• /
• v.18 no.2
• /
• pp.178-184
• /
• 2014

CMOS technology based on PCA is very efficient at an implementation of memory or ALU. However, there has been a growing interest in quantum-dot cellular automata (QCA) because of the limitation of CMOS scaling. In this paper, we propose a design of PCA architecture based on QCA. In the proposed PCA design, we utilize D flip-flop and XOR logic gate without wire crossing technique, and design a input and rule control switches. In experiment, we perform the simulation of the proposed PCA architecture by QCADesigner. As the result, we confirm the efficiency the proposed architecture.