• Korean Chemical Engineering Research
• /
• v.51 no.4
• /
• pp.426-431
• /
• 2013

Nanosized $TiO_2$ particles were prepared from titanium (IV) sulfate solution using base solutions at low reaction temperature ($95^{\circ}C$) and atmospheric pressure by hydrothermal precipitation method without calcination. The effects of preparation conditions, such as kind of base solutions (NaOH, $NH_4OH$, Monoethanolamine, Diethanolamine, Triethanolamine) and surfactants (CTAB, Span 20, SDBS), concentration of surfactants, temperature and pH, on the physical properties of $TiO_2$ particles have been investigated by XRD, SEM and Zeta-potential meter. Absorption area was also investigated by DRS in order to confirm the photocatalytic activity of the nanosized $TiO_2$ particles. It was turned out that, among base solutions, NaOH provides the smallest $TiO_2$ particles with excellent crystallinity. And cationic surfactant (CTAB) prepared smaller $TiO_2$ particles than any other surfactants. When CTAB is added in the concentration ratio of $Ti(SO_4)_2$:CTAB=10:1, $TiO_2$ particles with particle diameter of 5.8 nm were prepared. This is approximately 1/10 of that prepared without CTAB.

• Journal of the Korean Society of Urban Environment
• /
• v.18 no.4
• /
• pp.429-437
• /
• 2018

In this study, the mixed toxicity of heavy metals (Cu, Pb, Hg) and surfactants (SLS, ALS) was evaluated by using Vibrio fischeri and Daphnia magna. The sensitivity of ecotoxicity to heavy metals was sensitive to daphnia but the case of surfactants were more sensitive to Vibrio fischeri. Experimental results of Vibrio fischeri show that the toxicity value P(O) was lower than the predicted value P(E), and the antagonistic effect was observed when the heavy metal and the surfactant were mixed. It seems that SLS and ALS, which are anionic surfactants, have anionic form on the hydrophilic head, so that they have an antagonistic effect that they are bonded with heavy metal ion which is a cation type and the actual toxicity is lowered. In Daphnia magna, the results showed that antagonistic, additive and synergistic effects were in order as concentrations increased. As the concentration increases, Daphnia magna, which is highly sensitive to heavy metals, seems to have a synergistic effect with a rapid increase in mortality.

• Journal of Adhesion and Interface
• /
• v.17 no.2
• /
• pp.49-55
• /
• 2016

In this study, we designed an environment friendly, water-based adhesive using the acrylic emulsion method as a replacement for solvent-based adhesives, which are most commonly used in layered laminates for flexible food packaging. We designed adhesives with different combinations of anionic, non-ionic, and phosphoric ester surfactants, and with different concentrations of chain transfer agent (CTA). We also examined the effect of the degree of cross-linking by synthesizing and comparing 8 test group adhesives with different types of functional monomers. Additionally, we synthesized 2 other test group pressure-sensitive adhesives (PSA) using styrene/alpha-methyl styrene/acrylic acid (SAA) semipolymer dispersing agents (with molecular weights of 13,000 g/mol and 8,600 g/mol, respectively) to replace the conventional surfactants. We evaluated whether the 10 test group pressure-sensitive adhesives met the basic physical property criteria required for flexible food packaging by carrying out a physical analysis of their glass transition temperature (Tg), particle size, adhesion, and molecular weight. In our test, 2 test group adhesives manufactured with the combination of anionic and non-ionic surfactants, CTA concentration of 0.2%, and functional monomers of hydroxyethyl acrylate (HEA) and glycidyl methacrylate (GMA) demonstrated molecular weight and flexibility suitable for flexible packaging, with low adhesiveness and small particle size.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.2
• /
• pp.193-201
• /
• 2000

Partitioning of hydrophobic organic compounds (HOCs) to a biosurfactant, hydroxypropyl-${\beta}$-cyclodextrin (HPCD), was conducted to evaluate the feasibility of using HPCD to remove HOCs from soil/groundwater. HOC partitioning to HPCD was very fast, with over 95% of the complexation occurring within 10 min. Some influence of solution chemistry and HOC concentration on HOC-HPCD complex formation coefficients was observed. HPCD sorption on soil as quantified by both a fluorescence technique and total organic carbon measurements was negligible, indicating no significant affinity of HPCD for the solid phase. Although the HOC solubilization capability of HPCD was lower than that of synthetic surfactants such as SDS and Tween 80, HPCD can be effective in removing sorbed HOCs from a model subsurface environment, primarily because of its negligible sorption to the solid phase (i.e., all the HPCD added facilitates HOC elution). However, in contrast with conventional surfactants, HPCD becomes relatively less effective for HOC partitioning with increasing HOC size and hydrophobicity. Therefore, comparisons between HPCD and synthetic surfactants for enhanced remediation applications must consider the specific HOC(s) present and the potential for surfactant material losses to the solid phase, as well as other more generally recognized considerations such as material costs and potential toxicological effects.

• Applied Chemistry for Engineering
• /
• v.9 no.7
• /
• pp.968-973
• /
• 1998

The critical micelle concentrations($CMC^*$) of the mixed surfactant systems of cationic surfactant cetylpyridinium chloride(CPC) and nonionic surfactant Triton X-100(TX-100) in aqueous solutions of salts(KCl and $Na_2CO_3$) and isomeric butanols(tert-butanol, iso-butanol and n-butanol) were determined by UV spectroscopy method. The various thermodynamic values in aqueous solutions of salts and isomeric butanols were compared with the values in pure water, calculated by means of the equation derived from the pseudo-phase separation model. Thermodynamic parameters($X_1$, $\beta$, ${\gamma}i$, $ai^M$, $C_i$ and ${\Delta}H_{mix}$) were found to have great effects of salts and isomeric butanols on the mixed micellization of CPC/TX-100 mixtures, and also in good agreements with the nonideal mixed micelle model. They showed all negative deviations from the ideal mixed micellar behavior.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.38 no.2
• /
• pp.133-138
• /
• 2012

The purpose of this study was to examine the correlation between physical properties of dried coacervate films and dry feel for shampoo composition. Simple shampoo compositions were made of two different cationic charge density polymers in the same surfactant compositions. The simple shampoo compositions were diluted with distilled water to make coacervate. Formed coacervate was collected by centrifuge (3,000 rpm, 30 min). Coacervate was coated on the glass plates and dried in drying oven (for 1 h, $50^{\circ}C$) to make the thin film. We carried out an experiment on measurement of contact angle, moisture loss ratio and SEM image analysis of the dried coacervate film. Dry feelings of the shampoos were evaluated by panel using hair tresses. Results show that the properties of dried coacervate films affect the dry feel of the after shampooing.

• Applied Chemistry for Engineering
• /
• v.33 no.6
• /
• pp.606-612
• /
• 2022

The purpose of this study is to convert hydrophobic dyestuff to hydrophilic dyestuff by reacting cationic collector with anionic dyestuff and reaction anionic collector with cationic dyestuff. The removal of colors from aqueous solutions and/or dispersions has been studied by dispersed-air flotation in a batch column. In this studies used generated micro bubble by ceramic gas diffuser having micro pore size for air flotation process. In this study, a ceramic gas diffuser with micro pore size was used to generate micro bubbles for the air flotation process. Two colours were used for the experiments: Basic Yellow 1 (cationic dyestuff) and Direct Orange 10 (anionic dyestuff). All two were effectively removed by flotation within 8 mins. Sodium dodecyl sulfate, sodium oleate (an anionic collector), and amines (a cationic collector) were found to be effective as collectors in the removal of color, which was found to be related to the pH of the solution and the amount of collector added to it, with high collector dosages causing the process to become pH-independent.

• Journal of the Mineralogical Society of Korea
• /
• v.17 no.4
• /
• pp.299-307
• /
• 2004

Surfactant adsorption by two montmorillonite types with different interlayer cations of Ca and Na was characterized by examining the time dependence of surfactant behavior on the clay surfaces. Surfactants with different micelle concentration were conducted in our experiment to observe a nonequilibrium activity of cationic surfactant on the clay over reaction periods ranging from 0.1 min to 11 days. As compared with Ca-montmorillonite (SAz), a more active intrusion of surfactant molecules into the interlayers was found in Na-montmorillonite (SWy). During a short 'initiation' stage, the basal spacing of SWy montmorillonite increased rapidly with logarithmic time. For SAz montmorillonite, however, the abrupt basal spacing increase occurred at the later stage of the reaction. From the result, the difference in the adsorption behavior exhibited by the two montmorillonite types partly results from their intrinsic nature, that is, inorganic cations originally existing on the clay surfaces. Additionally, the micelle concentration of surfactants affects the development of organo-montmorillonite, especially, in the intercalant formation and stabilization under nonequilibrium.

• Journal of Bio-Environment Control
• /
• v.18 no.2
• /
• pp.124-131
• /
• 2009

Surfactant polyvinyl alcohol (PVA-95) 1, 2, 4mg. $L^{-1}$ and calcium lignosulfonate (CLS) 5, 25, 50, 100mg. $L^{-1}$ were treated to the nutrient solution containing 1.0mg. $L^{-1}$ selenium (Se) to evaluate Se absorption effect using small DFT apparatus. The growth of leaf lettuce and pak-choi did not show unique significance by surfactant kinds and concentration in the tested range and physiological disorder. Vitamin C in leaves of two leafy vegetables was not significantly affected by surfactants also. Among major cations K content in pak-choi was highest in Se I+PVA-95 4mg. $L^{-1}$ treatment, and high in Se I+CLS 5 mg. $L^{-1}$ treatment. Ca content in two leafy vegetables showed increasing pattern by the two kinds of surfactants. Mg content was high in Se I+CLS 25mg. $L^{-1}$ treatment compared to control. Pak-choi absorbed Se about 10 times higher than leafy lettuce. Se content in leaves of two leafy vegetables increased by the treatment of two kinds of surfactants with the exception of CLS 100mg. $L^{-1}$ treatment.

• Polymer(Korea)
• /
• v.28 no.5
• /
• pp.374-381
• /
• 2004

Gas permeability of low density polyethylene (LDPE) film containing zeolite powder for $CO_2,\;O_2$ and $N_2$ were investigated. Zeolite powders modified by cations or surfactant were compounded with LDPE to produce $20 wt\%$ masterbatch. After blending the masterbatch with LDPE, zeolite filled films were prepared by the blown film process. Finally, the composite films containing zeolite loadings of 0, 3,5, and $10 wt\%$ were produced. A gas permeability apparatus based on the variable volume principle was designed to analyze the characteristics of films. Experiments showed a general trend that gas permeabilities first decreased and then increased as the zeolite content was increased. Surfactant modified zeolite showed a better interfacial adhesion with the matrix, but the film did not show a discernible difference in gas permeability compared with the other modified films. The difference of temperature dependences in the gas permeabilities of composite films was slightly smaller than that of LDPE film.