• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.751-754
• /
• 2000

본 논문에서는 EVRC 음성 부호화 시스템을 OakDSPCore(R) 를 기반으로 설계된 C&S Technology사의 CSD17C00칩을 이용하여 전 과정을 어셈블리어로 실시간 구현하였다. 구현된 EVRC음성 부호화기는 최대의 계산량이 요구되는8kbps 전송 모드일 때, 인코더부분이 최대24.45MIPS 이며 디코더부분은 3.35MIPS의 복잡도를 나타낸다. 사용된 메모리양은 프로그램 ROM 12.2Kworsd, 데이터 ROM(table) 6.72Kwords 및 RAM2.94Kwords 이다. 구현된 EVRC음성 부호화기는 북미 표준화 기구인Telecommunications Industry Association(TIA)에서 제공하는 19개의 test 벡터들을 모두 통과하였다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06e
• /
• pp.285-288
• /
• 1998

G.723.1은 저 전송률 환경에서 고음질을 제공하여 주고 있으나 CELP형 부호화기가 갖는 합성에 의한 분석(analysis by synthesis) 방식의 구조로 인해 많은 처리 시간과 계산량을 요구하게 된다. 본 논문에서는 G.723.1에 대해 skipping 기법을 이용하여 피치 검색과정이 계산량을 줄여 부호화기의 전체 처리 시간을 감소시키는 방법을 제안하였다. 예측 피치를 찾기 위한 개회로 피치 예측(open loop pitch estimation) 과정에서 계산량을 줄이기 위해 skipping 기법을 사용하였다. 피치 예측 과정시 상관관계를 파형은 양과 음의 파형이 교대로 나타나는 특징을 가지고 있기 때문에 계산시 음의 파형을 생략하는 방법을 사용하였다. 실제 음성시료에 대해 제안한 피치 검색법을 적용하였을 때 부호화시 평균 처리시간은 약 10%정도 감소하였으며 기존 G.723.1과 제안한 방법을 적용한 G.723.1의 음질 비교를 위하여 MOS 평가를 했을 때 기존의 방법이 평균 3.76인데 비해 제안한 방법의 평균 MOS는 3.73으로 주관적인 음질 저하는 거의 나타나지 않았다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.129-132
• /
• 2001

본 논문에서는 EVRC 음성 부호화 시스템을 7MS320C54x를 이용하여 전 과정을 어셈블리어로 실시간 구현하였다. 구현된 EVRC 음성 부호화기는 최대의 계산량을 요구하는 8kbps 일때 잡음제거 알고리즘을 제치한 인코더부분이 평균 26.3MIPS 이며 디코더부분은 3.6MIPS의 복잡도를 나타낸다. 사용된 메모리양은 프로그램 ROM 16.9K words, 데이터 ROM(table) 7.9K words 및 RAM 5.8K words 이다. 구현된 EVRC 음성 부호화기는 북미 표준화 기구인 TIA(Telecommunications Industry Association)에서 제공하는 19 개의 테스트 백터들을 모두 통과하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.1024-1026
• /
• 2013

DVC (Distributed Video Coding) techniques provides a basic theory for the implementation of low-power video encoder. Conventional methods decide the parity bit request at decoder side. These are effective in controlling the bit-rate, but, are not able to control the visual quality. Thus, this paper presents an effective method of estimating visual quality improved by correcting the virtual channel noise for the reconstructed frame. Through several experiments, it is shown that the proposed method are able to estimate effectively the decoded visual quality.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.6C
• /
• pp.770-776
• /
• 2004

The goal of perceptual audio coder is to reduce redundancy and irrelevancy of audio signal based on the concept of masking. Several studies on masking effect reveal that the masking threshold varies as a function of the noise-like or tone-like nature of audio signals. Therefore, tonality of audio signal influences significantly the quality and efficiency of perceptual audio coder In this paper, we propose a new effective algorithm for tonality measure using spectrum energy. Since the proposed algorithm consists of a few transcendental functions and simple operations, it has lower complexity than MPEG psychoacoustic model-II. The proposed algorithm was tested with some audio signals, and DSP implementation showed that the proposed algorithm could be implemented with 3 MIPS. These results illustrate the efficiency of proposed algorithm in both performance and complexity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.12C
• /
• pp.965-970
• /
• 2010

In the NAND flash memory storing two bits per cell, data is discriminated among four levels of electrical charges. We refer to these four levels as E, P1, P2, and P3 from the low voltage. In the statistics, many errors occur when E and P3 are stored at the next cells. Therefore, we propose a coding scheme for avoiding E-P3 or P3-E data patterns. We investigate two modulation codes for 9/10 code (9 bit input and 5 symbol codeword) and 11/12 code (11 bit input and 6 symbol codeword).

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.3
• /
• pp.115-120
• /
• 2011

This paper is concerned with the performance comparison of CR-CMA (Coordinate Reduction-CMA) and CM-CMA (Constellation Matching-Constant Modulus Algorithm) that is used for improving the convergence characteristic and residual intersymbol interference which are used as the performance index for an adaptive equalizer. The equalizer is used to reduce the distortion caused by the intersymbol interference on the wireless and the wired band-limited channel, and the blind method which does not need for extra bandwidth by the training sequence of digital code are researched. Recently, by using the merit of simple operation in the CMA, the performance improvement is obtained by the modifying the cost function of it. In this paper, the new algorithm, CR-CMA and CM-CMA, the performance analysis are performed and compared by computer simulation. The CR-CMA has a superior equalization characteristics in the recovered constellation, convergence speed and residual intersymbol interference than the CM-CMA by computer simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.8
• /
• pp.662-668
• /
• 2013

Mobile communication systems have been adopting link adaptive transmission schemes such as adaptive modulation and coding (AMC) and hybrid-ARQ (HARQ). Incremental redundancy (IR) HARQ scheme is known to be highly efficient in terms of throughput and power consumption and can be a good solution for mobile communication systems. In this paper, we propose an IR-HARQ scheme based on dual-diagonal parity-type block LDPC codes in which we define a transmission priority of coded bits and propose the sub-packet construction rule. We present the throughput performance of IR-HARQ with various modulation and coding and multi-antenna modes. Consequently, the proposed scheme provides the improvement of system throughput by elaborate link adaptation with CQI information.

• Journal of the Institute of Convergence Signal Processing
• /
• v.7 no.1
• /
• pp.17-23
• /
• 2006

In recent years, RFID has received much attention because of spread usage in industrial applications including factory, material flow, logistics and defense areas. However, there is only CRC-16 for error detection in ISO/IEC 18000-6 Protocols prepared for 860-960 MHz RFID, high error rates are expected in cases of high level of security and noisy envirionment. In this paper, we propose a usage of convolution code as a method for satisfying the high level of security requirement and system error performance.'1'he signal control function is implemented in a microprocessor with RF modulation and the convolutional encoding and Viterbi decoding are implemented in an FPGA chip.'The frame error rates are measured with and without convolution coding under the channel conditions of line-of- sight and non line-of-sight, respectively.

• Journal of Korea Port Economic Association
• /
• v.22 no.3
• /
• pp.79-96
• /
• 2006

In this paper, using the gravity model, I examined that the port traffic in the port of Pusan have been influenced by GDP of South Korea, GDP of trading countries, an agreement on maritime transport, maritime transport charge and the local economic integration, etc. In view of the policy implication based on the result of analysis by the gravity model, the port traffic and the transshipment in the port of Pusan is positively influenced by GDP of South Korea, GDP of trading countries and countries on the way of main sea route(LINE). But it is negatively influenced by maritime transport charge. Especially, when a maritime transport charge goes up 1 percentage point, it is estimated that a transshipment decreases about 0.586-0.895 percentage point. So, a maritime transport charge was found to have more effect on a transshipment than a port traffic(except transshipment).