• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.2
• /
• pp.165-172
• /
• 2014

This study was focused on the investigation of the liquid propellants for the launch vehicle, past, present and future trends in worldwide. In general, storable and hypergolic propellants are used for the military purposes and comparing to this, the kerosine fuel and cryogenic propellants are used for the launching systems. Although liquid propulsion is seemed as a mature technology, the requirements of a renewed interest for space exploration has led to the development of a family of new engines, with more design margins, simpler to use and to produce associated with a wide variety of thrust and life requirements.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.2
• /
• pp.87-94
• /
• 2019

Liquid rocket propulsion test facility should provide for the interface condition installed on the upper level system for the test article. In addition, safety provision should be provided to be ready for accident such as explosion which can be occurred during development stage. For this purpose infra-structures of test facilities must be constructed so that stable combustion test can be performed and be guard against accidents. In this article, various aspects for infrastructures of propulsion test facilities are investigated including architecture and civil engineering aspects, test stand, room arrangements, interfaces among facilities, fire-fighting facilities, electrical power facilities.

• Journal of the KSME
• /
• v.44 no.1
• /
• pp.27-27
• /
• 2004

미국 국방부 소속 육군차량사업부(National A Automotive Center)는 대체에너지를 이용한 군용 차량 개발을 위해 Michigan 주 Rochester Hills에 위치한 E Energy Conversion Devices(ECD) 사와 일부 기술 개발 에 대한 기술 제휴를 한다고 발표했다. 국방부는 태양전 지와 수소를 연료로 사용하는 대체에너지 차량을 개발하 기 위해 ECD에 1단계 연구에 필요한 연구비를 지원했다. 이번 연구에는 연료전지를사용한차량개발을위해 5 500,$\omega$0달러가 투자되는데, Texaco Ovollic Hydrogen S Systems(TOHC)의 고체 휴대용 수소 연료와 채충천 (refueling) 시스탬이 주요 개발 목표로 설정됐다. ECD의 역할은 최근 개발된 Toyota Prius에 시범 적으로 장착된 저압 고체형 수소 저장 시스템의 기술을 군용 차량에 알맞게 전환시키는 것이다. TOHC와 ECD가 개발한 고체형 수소 보관 시스댐은 고압을 요구하는 연료전지 차량의 수소 저 장 시스템이 갖고 있는 많은 문제점들을 해결할 수 있을 것으로 기대되는 연료전지를 이용한 엔진 개발 중 최신 기술이다. 특히 전투 상황에서 차량이 폭발하기 쉬운 수소 저장 탱크를 장착한 채 전 장으로간다는 것은적에게 노출 될 경우자살과마찬가지인 치명적인 피해를 입을수 있다. 이 프로젝트의 개요를 살펴보면, 수소 저장 시스템은 적어도 약 lOkg의 수소를 적은 용적 내에 낮은 압력에서 안전하게 고체 상태로 저장할 수 있다. 이 고체 저장 용기는 하루에 두 번 1.7kg의 수소를 10분 이내에 재급유할 수 있다. 수소는대부분고압가스형태나저온액체 형태로보관된다. 기체나액체 형태의 수소는 연료전 지에 사용되기에는 적합하지 않은 점이 많다. Ovonie 수소 저장 방법은 수소를 저압 고체 형태 ( (metal hydride)로 보관하는 방법으로, 고압 기체나 저온 액체가 갖고 있는 많은 문제점들을 해결 할수있다. 그림을 참조하면 고체 형태의 수소 보관 방법이 다른 보관 방법에 비교해 단위 체적당 최고 6배 많은수소질량을보관할수 있다. 이 고체 형태의 보관방법은수소가적절한합금과평형 압력 이 상의 환경에 놓일 경우 합금에 홉착되는 현상을 이용하고 있다. 수소를 흡수한 합금은 새로운 특성 을 가진 metal hydride로 변하게 된다. 이 과정 에서 열이 부산물로 발생한다. 반대로 수소를 metal hydride로부터 분리시키기 위해서는 합금을 가열해야 한다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.2
• /
• pp.139-155
• /
• 2016

Present paper introduces the recent advances in space launch vehicle technologies. A brief survey is given for the space development programs in civil sector with their business model and key technologies. Advances in key technologies were reviewed in detail with more emphasis on the electric pump cycle engine for low cost high performance small launch vehicle, Electron, under development by Rocketlab Ltd., since their contributions would give good lessons for rocket scientists.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.05a
• /
• pp.303-306
• /
• 2008

After the successful flight test of X-43A, U.S. Airforce is developing missile-type X-51A SED (Scramjet Engine Demonstrator-Wave Rider). X-51A using PWR (Pratt and Whitney Rocketdyne) X-1 hydrocarbon fueled scramjet engine will have a ground test in 2008 and flight test in 2009. Technologies established though the X-51A program will be transferred to DARPA's Falcon program developing HTV (Hypersonic Test Vehicle)-3X and HCV (Hypersonic Cruise Vehicle). Present paper is an overview of propulsion core technologies of X-51 such as regenerative cooling of engine structures and combustion using liquid/supercritical JP-7 fuel.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.358-361
• /
• 2007

Most aircraft cruise in the stratosphere at which temperature is below $-50^{\circ}C$ md, as a result, the surface of aircraft can be iced up. Ice on the wing can change aerodynamic characteristic and results in the deterioration of its performance. Ice on the engine inlet increases the possibility of compressor blade damage and affects the performance and safety of the engine. This paper focused on the development of icing simulation device for analyzing effect of icing on engine performance. Icing simulation tests were conducted with a liquid air system and a icing simulation device and results show that icing could be simulated with this system.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.11 no.4
• /
• pp.38-45
• /
• 2007

A liquid rocket engine fuel-rich gas generator has been developed for the first time in the country, which can produce combustion gas over the rate of 4 kg/s at 900 K and 58 bar. The gas is not only for driving a turbopump but also for providing heat source for propellant supply tanks. The final design of the gas generator had been fixed based on the concept and preliminary development tests, and was validated through structure and heat transfer analysis. The manufacturing involved precision machining, surface finish, and special welding technique. The final assessment on the characteristics of ignition and combustion had been carried out for two different versions of injector heads. This concluded that the present product satisfies the development requirements such as spatial temperature distribution and the development has been successful.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.7
• /
• pp.558-565
• /
• 2017

Recently, there has been a tendency to lead the private sector in the launch vehicle market, and as the market has become saturated, efforts are being made to reduce the launch cost. Advanced countries in space development have promoted manned long-range space exploration plans. As oxygen/methane is more efficient, lower cost, and eco-friendly than typical propellants, and can be produced locally on an alien planet, it is the most suitable next-generation propellant to meet this trend. Now methane engine development is accelerating due to changes in international conditions and corporate environment. It is also expected to develop a methane engine in order to survive in this global trend and to keep up with the launch vehicle market in the future.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.864-870
• /
• 2017

The propellants are burned in the pre-burner of the staged combustion cycle engine, and the resulting hot gas drives the turbine, and the turbine operates the turbo pump. The burned gas passing through the turbo pump is supplied to the combustor at high temperature and high pressure, where the gas is supplied in an excess of fuel or an excess of oxidant depending on the amount of fuel or oxidant. When the cycle works at oxidizer-rich staged combustion, its metal pipe can ignite or explode by the impact of even small particles. In this study, we develop the powder combinations for anti-oxidation coating through the analysis of other coating materials and establish the coating process.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.181-185
• /
• 2006

A liquid rocket fuel-rich gas generator developed for the first time in the country can produce combustion gas over the rate of 4 kg/s at 900 K and 58 bar. The gas can be used not only for driving a turbopump but also for providing heat source for propellant supply tanks. The final design of the gas generator has been fixed based on the concept and preliminary development tests, and was validated through structure and heat transfer analysis. The manufacturing involves precision machining, special surface finish, and welding techniques. The final assessment on the characteristics of ignition and combustion had been carried out through five combustion tests. This concluded that the present product satisfies the development requirements.