• Polymer(Korea)
• /
• v.35 no.3
• /
• pp.272-276
• /
• 2011

The induction mechanisms of planar arrangements in cholesteric liquid crystals (CLC) which showed selective reflections of visible light were investigated by measuring the selective reflectivity and FTIR peak intensity of $C{\equiv}N$ stretching band. Although the planar arrangement of CLC was not as perfectly induced as the cases prepared with using alignment layers, it could be also induced by stretching polymer substrate or by applying shear forces. The planar arrangements were induced by forming CLC helical structures on top of liquid crystal molecules which were in contact with the substrate and oriented all in the same direction.

• Clean Technology
• /
• v.16 no.2
• /
• pp.103-116
• /
• 2010

It has been reported that the LCD panel market in the FPD industry is become growing and its panel size and production capacity are increasing, and its manufacturing technique is improved every year. FPD manufacturing process requires high cleanliness in its overall process. Especially, FPD cleaning process which accounts for 30~40% of total manufacturing process is very important in its technological and productivity aspects. It is difficult to remove residual liquid-crystal in the fine gap after liquid-crystal injection process in the cell. In this study, aqueous cleaning agents with excellent cleaning, rinsing, and penetrating abilities, but minimum ion content for LCD panel were formulated through mixing glycol ether-type and glycol dimethyl ether-type solvents and nonionic surfactants which are widely used as raw materials for alternative cleaning agents because of environmental regulation at home and abroad. And the formulated cleaning agents were applied to clean FPD liquid crystal after its injection in the cell. Physical properties, cleaning efficiencies, and rinsabilities of the formulated cleaning agents with different combination ratios of solvents, surfactants and additives were measured. As experimental results, the formulated cleaning agents showed higher wetting indices and cloud point than the traditional commercial cleaning agent. And it was found that cleaning efficiencies of the formulated cleaning agents were influenced by the structure of main solvents in them and the types of liquid crystal as soil for cleaning. The best cleaning agents among the formulated cleaning agents showed similar cleaning efficiencies and better rinsabilities compared to the conventional cleaning agent.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.3
• /
• pp.484-495
• /
• 2020

This study is a mixed surfactant (MimicLipid-MSM1000) that forms the same structure as that of the stratum corneum, sucrose distearate, polyglyceryl-2 dioleate, fermented squalane, ergosterol, 10-hydroxystearic acid, mixture consisting of was synthesized. When using 2~5 wt% of this mixed surfactant, it was possible to make an artificial skin mimetic that forms a multi-layer lamellar structure of 5~30 layers. An emulsion was prepared using this mixed surfactant, and a multi-layered lamellar phase was formed and analyzed mechanically. The appearance of this surfactant was a light brown hard wax, the hydrophilic lipophilic balance (HLB) was 12.53, the critical parameter value was 0.987, and the acid value was 0.13. Stability according to pH change was also stable in acidic (3.8), neutral (7.2) and alkaline (10.8). The particle size of the liquid crystal was found to be the most stable maltese cross lamellar crystalline droplet at 5~25mm. The size of the emulsified particles according to the change in the speed of the homo agitator is 2500 rpm (17.9mm±2.6mm), 3500rpm (12.5mm±2.1mm), 4500rpm (6.2mm±1.8mm) particles were formed. Liquid crystal forming particles were observed through a polarization microscope, and the formation structure of the liquid crystal was precisely analyzed with a scanning electron microscope (cryo-SEM). As an application field, it is expected that it will be widely applicable to the development of various prescriptions, such as various skin care cosmetics, makeup care cosmetics, and scalp protection cosmetics, by using a skin-mimicking surfactant.

• Applied Chemistry for Engineering
• /
• v.26 no.4
• /
• pp.445-451
• /
• 2015

Semi-flexible liquid crystalline polymers containing a mesogenic group and an octamethylene flexible spacer in the main chain were synthesized by solution polycondensation. The mesogenic group in the polymer consists of four aromatic rings connected by ester and ketone, ether, sulfide, methylene, sulfone, or isopropylidene linkage groups. This paper discusses effects of the central linker of the mesogenic group on polymer properties. The structures and properties of synthesized polymers were investigated by $^1H$-NMR, FT-IR, differential scanning calorimeter (DSC), thermogravimetric analyzer (TGA), X-ray diffractometer (XRD), and polarizing optical microscope (POM). Polymers having bent linkage groups exhibited low thermal transition temperatures, narrow mesophase temperature ranges, low liquid crystallinity, and good solubilities in organic solvents, while those having bulky linkage groups were amorphous and exhibited high glass transition temperatures.

• Journal of the Korean Chemical Society
• /
• v.26 no.3
• /
• pp.188-193
• /
• 1982

Four new thermotropic copolyesters were prepared and their liquid crystal properties were investigated by differential scanning calorimetry and on a hot-stage of a polarizing microscope. Three copolyesters had same mesogenic unit, triad aromatic ester structure, interconnected through a random combination of either odd-even, or odd-odd, or even-even number of methylene groups in the polymethylene flexible spacers. Another random copolyester consisted of mesogenic units of 1 : 1 mixture of central methyl-and bromohydroquinone moieties with two flanking p-oxybenzoate units connected by decamethylene spacer. All of the polyesters formed nematic liquid crystal phase upon melting. The transitions for melting and nematic ${\to}$ isotropic transformations could be reversibly observed by DSC as well as by microscopic study. The thermodynamic properties for their liquid crystal ${\to}$ isotropic phase transitions were discussed in relation to their chemical structures.

• Applied Chemistry for Engineering
• /
• v.31 no.3
• /
• pp.305-309
• /
• 2020

In this study, a series of ionic liquids based electrolytes for lithium batteries were prepared by mixing the anion functionalized ionic liquid, [DMIm][MPEGP] (1,3-dimethylimidazolium (2-methoxy(2-ethoxy(2-ethoxy)))-ethylphosphite), with the lithium salt, LiTf₂N (lithium bis(trifluoromethanesulfonyl)imide), and the concentration of lithium salt was varied between 0 and 3.0 molar ratio. We observed the ionic mixtures became opaque and spontaneously aggregated to form a thermotropic ionic liquid crystal. Extensive spectroscopic examinations of the ionic liquid crystals were carried out to investigate their self-organized structures and the ion transport behavior depending on the concentration of lithium salt. An increase in the ionic conductivity was observed for the ionic liquid crystals related to the ability to form ion diffusion pathways along the ordered structures, resulting in improved electrochemical performances of lithium batteries.

• Polymer(Korea)
• /
• v.25 no.2
• /
• pp.279-292
• /
• 2001

Two kinds of (hydroxypropyl)cellulose(HPCs) with different molar substitution (MS) and three types of derivatives based on the HPCs: (acetoxypropyl)celluloses, (ethoxypropyl)celluloses, and (cyanoethoxyprofyl)celluloses were synthesized, and their thermal and mesomorphic properties were investigated. All samples, which exhibit cholesteric reflection colours at room temperature, formed right-handed helicoidal structures whose optical pitches (λ$_{ms}$ ) increase with temperature. However, the isotropization ($T_{i}$) and glass temperatures, the magnitude of λ$_{m}$ of the mesophase at the same temperature, and the temperature dependence of λ$_{m}$ of the investigated derivatives highly depended on MS and the length and structure of the side chain introduced in HPC. The results were discussed in terms of the difference in the polarity and flexibility of the substituents and the distance between the main chains. For all derivatives, Am values approached infinity at temperatures above the $T_{i}$, of the mesophase, and no reversal in the sense of the pitch with temperature was detected.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.26 no.1
• /
• pp.93-106
• /
• 2000

One phase liquid crystal formula was developed by using of nonionic surfactants, polyols, water and oils and its physical property was investigated. At the system oft to 1 ratio of POE octyldodecyl ether series, which have Y type (branch type) hydrophobic group, and POE glyceryl monostearate series, Y type hydrophilic group, it was examined that the formula at 7:3, 6:4, and 5:5 ratio of nonionic surfactant : polyols, shows L$\alpha$ , a pattern which is a typical characteristic of liquid crystal structure under the cross microscope polarized film. As results of L$\alpha$ phase diagram study, the formula which had high hydrophilic nonionic surfactant and the 7:3 ratio of nonionic surfactant : polyol appeared to increase the amount of oil containment and to be capable of the lamella formation. Besides it was examined that lamellar liquid crystal formula could contain about 25-40% water between lamella layers and it was transformed into w/o emulsion following as water content increased. When the lamella gel was applied into a human skin, it was investigated that it had effectiveness in increasing transepidermal water content of the skin.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.17 no.3
• /
• pp.155-165
• /
• 2024

A hybrid thin film was prepared by doping reduced graphene oxide (rGO) into a sol-gel solution mixed with aluminum, titanium, and strontium using a brush coating method. The annealing temperature was carried out at 160, 260, and 360℃, and the difference in oxidation reaction was observed. The sol-gel solution created during the membrane manufacturing process generates a contractile force due to the shear stress of the brush bristles, forming a microgroove structure. This structure was confirmed through scanning electron microscopy analysis, and the presence of rGO was clearly revealed. As the annealing temperature increases, the oxidation and reduction reactions on the thin film surface become more active, so the intensity of the surface mixture increases. Moreover, the electro-optical properties were stabilized and improved by increasing the intensity of the mixtures. Likewise, the voltage-capacitance values are also significantly improved. Lastly, the transmittance measurement showed that it was suitable for liquid crystal display application.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.47 no.1
• /
• pp.49-56
• /
• 2021

In this study, a liquid crystal emulsion with a composition ratio similar to the skin lipid composition was manufactured using ceramide, glycolipids, cholesterol, and fatty acids, and a polarized microscope was used to identify liquid crystal particles in the formulation, and a cryso-SEM was used to confirm the formation of a multilayer structure. The above samples were stored at room temperature for one month and the liquid crystal structure was continuously maintained through microscopic observation. In addition, a cream composition containing liquid crystal emulsion was manufactured, and the efficiency of ceramide skin penetration was confirmed using three-dimensional artificial skin. Clinical trials were conducted using the cream composition and the results of clinical trials on skin barrier improvement were confirmed by measuring skin moisture retention (skin hydration) and transepidermal water loss (T EWL) of subjects compared to general emulsion.