• 제목/요약/키워드: 압밀법

검색결과 123건 처리시간 0.023초

경량성토재(EPS)를 이용한 교량 교대의 안정성 검토 (A Case Study of Stability of Bridge Abutment Using the Light Banking Material(EPS))

  • 장용채
    • 한국농공학회지
    • /
    • 제40권5호
    • /
    • pp.80-90
    • /
    • 1998
  • The EPS construction method-one kind of the load reducing methods-utilizes the EPS blocks, ultra-light materials whose unit weight is about 1/100 of soils and has been applied to many soft ground sites. It needed 3,000 days to get the 90% degree of the consolidation for the case of 12m high soil embankments on the 30m thick soft clayey foundations. The N value of SPT at this deposit was less than 5. The pack drain was installed to promote the radial consolidations. Although staged embankments were planned, designers failed to get a sufficient stability of the foundation ground. Therefore, the EPS fill method was selected to reduce the load and the construction period. EPS blocks(D-20 model) replaced the upper part of the soil embankments. These complex embankments reduced the ground settlement and the construction period. The possibility of lateral movements of the bridge abutments was checked and the design scheme was reviewed.

  • PDF

가우스 적분법을 이용한 압밀침하량 산정 (Evaluation of Consolidation Settlement by Gaussian Quadrature)

  • 윤찬영;정영훈
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2009년도 춘계 학술발표회
    • /
    • pp.188-194
    • /
    • 2009
  • Consolidation settlement, a crucial parameter in geotechnical design of soft ground, has not been computed in a unique way due to different computation methods in practice. To improve computational error in calculating consolidation settlement, a number of researches has been attempted. Conventional 1-dimensional consolidation theory assumes the center of the clay layer as the representative point to obtain effective stress in calculation, which could resort to erroneous results. To calculate exact solutions considering initial distribution of effective stress, diving a stratum into multi-layers could resort to wasting time and effort. In the study, a novel methodology for calculating consolidation settlement via Guassian quadrature is developed. The method generally is capable of computing settlements in any case of the stress conditions encountered in fields.

  • PDF

점성토의 전기삼투 배수와 Zeta Potential의 상관성 (Relationship between Electroosmotic Drainage and Zeta Potential of Clayey Soils)

  • 김수삼;한상재;임성철
    • 한국지반공학회논문집
    • /
    • 제16권6호
    • /
    • pp.69-77
    • /
    • 2000
  • 본 연구에서는 전기삼투 배수와 제타포텐셜과 상관성을 규명하고자 하였다. 실험으로 직경 10cm, 길이 16cm의 원형 압밀시료에 일정 전압경사법으로 1V/cm의 직류접압을 가하여 0, 500, 3000 ppm의 납농도와 0, 230, 2300, 23000 ppm의 염분농도에서 각각 12일 과 14일 동안 전지삼투 배수량을 측정하였고, 같은 농도에서 kaolinite 현탁액의 제타포텐셜을 pH2부터 14범위에서 측정하였다. 실험결과 제타포텐셜은 전해질 농도와 pH 변화에 의존적이고, 전기삼투 투수계수와 비례관계가 있음을 확인할 수 있었다. 제타포텐셜에 따른 전기삼투 배수량과 비교한 결과, 전해질 농도가 낮을수록 제타포텐셜은 음의 값은 크고, 전기삼투 배수량도 더 증가하였다.

  • PDF

접합요소에 의한 Vertical Drain Well 지반의 변형해석 - 모델지반과 실제 Sand Drain Well 지반을 중심으로 - (Deformation Analysis of Soft Foundation with Vertical Drain Wells using the Interface Element Method -With Emphasis on Model Foundation and Actual Sand Drain Well Foundation-)

  • 이진수
    • 대한토목학회논문집
    • /
    • 제13권4호
    • /
    • pp.227-237
    • /
    • 1993
  • 본 연구는 vertical drain well 설치지반의 보다 더 실제적이고 합리적인 변형해석을 목적으로 drain well 타설로 인하여 발생하는 well 주변 점토층의 교란(smear)영향, well과 인접점토층의 강성차이에서 오는 접합면 변형의 불연속거동 표현이 가능한 유한요소해석 방법을 제시하고자 하는데 목적이 있다. 유한요소해석의 구성은 변형의 지배방정식으로서 Biot의 압밀이론을 근간으로 여기에 흙의 구성식과 접합요소이론을 결합하여 이루어진다. 본 논문에서 제시한 해석법의 정도는 Siriwardane과 Ghaboussi 등이 사용한 지반에 적용하여 검증한 바 있다. 여기에서는 이를 다시 모델지반과 실제지반에 대해서 유한요소해석법을 적용하여 강성이 다른 이질재료간 경계에서의 불연속변형의 영향에 따른 지반내 거동특성을 살펴보고 이것을 함께 고려한 해석법의 정도를 알아보고자 한 것이다. 그 결과는 침하에 있어서 매우 만족스럽다고 보아지지만 간극수압등에는 잘 일치하지 않는 점이 있어 앞으로의 더 많은 연구가 필요하다고 판단된다.

  • PDF

역해석을 이용한 모래다짐말뚝(SCP)으로 개량된 연약점토지반의 압축지수 결정에 관한 연구 (A Study on a Compression Index for Settlement Analysis of SCP Treated Ground Using Back Analysis)

  • 황성필;임종철;권정근;강연익;주인곤
    • 한국지반환경공학회 논문집
    • /
    • 제11권7호
    • /
    • pp.5-14
    • /
    • 2010
  • 모래다짐말뚝(Sand Compaction Pile, 이하 SCP)으로 개량된 연약점토지반의 침하량 해석시, 근사법을 이용한 해석에서 응력분담비의 불확실성에 의해 발생되는 영향을 줄이고자, 유한요소해석 프로그램을 이용한 수치해석을 수행하였다. 모래다짐말뚝이 타설된 실내 모형압밀실험을 수행하였고, 이를 유한요소 프로그램으로 수치해석을 하였다. 실내실험과 같은 침하량을 도출하기 위해 역해석을 통한 혼합지반의 압축지수($C_c$)를 추정하고, 추세선을 활용하여 설계압축지수를 산정하는 식을 제시하였다. 또한, 이식을 치환율 45%인 현장에 적용하여 현장 적용성을 검증하였다.

복합지반의 침하에 대한 영향인자의 평가 (Evaluation of the Influence Factor on the Settlement of Composition Ground)

  • 김방식;배우석
    • 한국지반환경공학회 논문집
    • /
    • 제8권3호
    • /
    • pp.19-25
    • /
    • 2007
  • 쇄석말뚝은 느슨한 사질토지반이나 점토지반에 치환법에 의해 다져진 자갈이나 쇄석을 연약한 지반에 삽입하여 개량하는 공법이다. 쇄석말뚝 공법은 흙과 말뚝 접촉면에서 압밀거동이 다양한 인자에 의해 영향을 받게 되어 정량적인 해석에 많은 어려움이 있다. 본 연구에서는 재하시험을 통해 선단지지 군말뚝의 거동에 대한 다양한 인자의 영향을 조사하였다. 궁극적으로 연약지반의 개량 특성과 설계인자의 영향력을 PR값을 사용하여 평가하였다. 실험결과와 계산된 PR 값으로부터 쇄석말뚝의 침하거동이 근입비나 매트의 설치여부 보다는 말뚝의 직경이나 복합지반의 치환율에 의해 영향을 받고 있음을 알 수 있다.

  • PDF

말뚝기초의 침하예측 (Settlement Predictions for Pile Foundations)

  • 윤길림
    • 한국지반공학회지:지반
    • /
    • 제13권2호
    • /
    • pp.137-154
    • /
    • 1997
  • 한계상태설계법상에서 말뚝기초는 상부구조물의 안정성과 공용성에 근거하여 지지력과 침하 량을 만족하도록 설계되어야한다. 본 논문에서는 공용성을 검토하기위해 과압밀된 점토지반에 위치한 9본의 군말뚝과 2본의 단말뚝에 대하여 실무에서 많이 이용되고 있는 예측식과 현장에서 수행한 피조콘 자료를 이용하여 침하량을 산정했다. 지반에 따라 공간적으로 변화하는 탄성계수가 침하예측에 미치는 영향을 간략히 조사했다. 예측방법으로는 단순탄성론적 예측식 인 베직법 (Vesic's method)과 풀러스법 (Poulos'B method)을 이용했으며 산정된 침하량을 실지 말뚝재하실험을 통해서 계측한 것과 비교한 결과 대부분 과다하게 예측했고 지반의 탄성계수를 직선적으로 가정한 같파는 침하계산에 큰 영향은 미치지 않는 것으로 판단되었다.

  • PDF

최소자승법을 이용한 준설토 문제의 System Identification (System Identification on Dredged Soil Problems using Least Square Method)

  • 유남재;박병수;김영길;이명욱
    • 산업기술연구
    • /
    • 제19권
    • /
    • pp.127-133
    • /
    • 1999
  • This paper is a research about system identification which optimizes uncertain geothechnical properties from the data measured during geotechnical design and construction. Various numerical optimization algorithms of Simplex method, Powell method, Rosenbrock method and Levenberg-Marquardt method were applied to the excavation problem to determine which method showed the best results with respect to robustness of success in finding an optimal solution to within a certain accuracy and number of function evaluations. From the results of numerical analysis, all of four algorithms are converged to exact solution after satisfying the allowed criteria, and Levenberg-Marquardt's algorithms was identified to be the most efficient method in number of function evaluations. System identification was applied to geotechnical engineering problems, possibly being occurred in field, to verify its applicability : estimation of settlement due to self-weight consolidation in dredged and filled soil. For self-weight consolidational settlement of a dredged soil, a program of evaluating the constitutive relationship of effective stress-void ratio-permeability was developed by using the technique of system identification. Thus, consolidational characteristics of a dredged soil, having a very high initial void ratio, can be evaluated.

  • PDF

연약지반의 모래다짐말뚝에 대한 하중전이 연구 (Study on Lond Transfer Characteristics of Sand Compaction Piles in Soft Soil Deposits)

  • 김재권;김수일;정삼성
    • 한국지반공학회논문집
    • /
    • 제20권7호
    • /
    • pp.183-196
    • /
    • 2004
  • 모래다짐말뚝은 압밀침하촉진과 지지력향상을 도모할 수 있는 연약지반 개량공법으로 그 사용성이 증가하고 있다. 본 연구에서는 실내시험과 3-D 유한요소해석을 수행하여 $30-40\%$의 저치환율 모래다짐말뚝의 하중전이특성을 고찰해본다. 또한, 이러한 연구결과는 실험치와의 검증을 통하여 모래다짐말뚝 하중전이특성평가를 위한 간편법을 제시하는데 사용되었다.

불교란 점토 압밀시험 결과의 새로운 해석법 (A New Analysis Method of the Consolidation Test Data for an Undisturbed Clay)

  • 박종화;고우모또타쯔야
    • 한국농공학회지
    • /
    • 제44권6호
    • /
    • pp.106-114
    • /
    • 2002
  • In this study, the results of a series of consolidation test for undisturbed Ariake clay in Japan were analyzed by three methods, e-log p (e: void ratio, p: consolidation pressure), log e-log p and n-log p (n: porosity). Moreover, the characteristics of each analysis method were studied. For undisturbed Ariake clay, the log o-Log p and the n-log p relationships can be found as two groups of straight lines of different gradients, but both the elastic consolidation and plastic consolidation regions of e-log p relationship are expressed as a curve. In this paper, the porosity of consolidation yield n$\_$y/, consolidation yield stress p$\_$y/, and the gradient of the plastic consolidation region C$\_$p/ were represented by the log e-log p method, and n$\_$c/, P$\_$cn/ and C$\_$cn/ were represented by the n-log p method. The meaning and the relationships of each value were studied, and the interrelationships among compression indices i.e. C$\_$cn/, C$\_$p/ and C$\_$c/ are obtained from each analysis method as a function of initial porosity n$\_$0/.