• The Journal of Engineering Geology
• /
• v.19 no.1
• /
• pp.25-31
• /
• 2009

This study was conducted to characterize the relationship of rainfall intensity and slope stability by using numerical analysis. The maximum precipitation rate for 10 minutes, 1 hour and 1 day was determined as 28 mm, 70 mm and 271 mm, respectively, by investigating 36 years of KMA data. Then slope infiltration analysis was performed to obtain the ground water level in the slope by using computer programming SEEP/W, and slope stability analysis was done for each time step by using program SLOPE/W. The factor of safety was minimized when the slope was saturated under each rainfall intensity; the time required for saturation was 2 hours with 10 minutes rainfall intensity of 28 mm, 7 hours with 1 hour rainfall intensity of 70 mm and 3 days with 1 day rainfall intensity of 271 mm. When accumulated rainfall was 196 mm for the 10minutes rainfall intensity of 28 mm with duration of 2 hours, the factor of safety was decreased to 1.0, while accumulated rainfall of 468 mm and 820 mm for the 1 hour and 1 day rainfall intensity, respectively, was required to reach the factor of safety, 1.0. Since the normalized rainfall intensity was 13 mm and 1.9 mm for 1 hour and 1 day maximum rainfall, respectively, those results showed that the rainfall intensity could have a more effect on the slope stability than the accumulated rainfall.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.3 s.49
• /
• pp.101-111
• /
• 2006

This paper proposes a method for modeling new fault ground motion due to moderate size earthquakes in Stable Continental Regions (SCRs) for the first time. The near fault ground motion is characterized by a single long period velocity pulse of large amplitude. In order to model the velocity pulse, its period and peak amplitude need be determined in terms of earthquake magnitude and distance from the causative fault. Because there have been observed very few new fault ground motions, it is difficult to derive the model directly from the recorded data in SCRs. Instead an indirect approach is adopted in this work. The two parameters, the period and peak amplitude of the velocity pulse, are known to be functions of the rise time and the slip velocity. For Western United States (WUS) that belongs active tectonic regions, there art empirical formulas for these functions. The relations of rise time and slip velocity on the magnitude in SCRs are derived by comparing related data between Western United States and Central-Eastern United States that belongs to SCRs. From these relations, the functions of these pulse parameters for NFGM in SCRs can be expressed in terms of earthquake magnitude and distance. A time history of near fault ground motion of moderate magnitude earthquake in stable continental regions is synthesized by superposing the velocity pulse on the for field ground motion that is generated by stochastic method. As an demonstrative application, the response of a single degree of freedom elasto-plastic system is studied.

• Journal of the korean veterinary medical association
• /
• v.37 no.10
• /
• pp.949-954
• /
• 2001

착유효과는 시간 당 소에 대한 일정한 일을 주로 측정하는 것이다. 그러나 시간 당 착유우유 kg에서 일정한 일의 양 또는 시간 당 더 좋은 우유 kg까지가 바라는 것이다. 소/시간에 대한 초점은 착유 전 유두준비에 소비시간을 감소 시키는 것이다. 그리고 이 검토는 우유생산, 안정된 우유흐름에 대한 시간, 유질과 유방건강에 중점을 둔 것이다. 우유의 질이나 유방염에 대하여 착유준비는 대단히 중요하다. 우리는 권장된 기준에 맞추어 착유준비를 하고 있는가? 스스로 검토하여 보아야 한다. 또한 그 기준에 정확히 따라서 함은 물론이고, 필요한 기구와 약제의 사용에도 하자가 없는지 재 확인하여 보아야 한다 그렇지 안으면 자기의 책임을 다른 곳에 돌리고 실제작업의 교정에는 실패를 하는 경우가 될 것이다.

• Korean Journal of Food Science and Technology
• /
• v.23 no.5
• /
• pp.578-581
• /
• 1991

The antioxidative effects of three kinds of commercial lecithin in fish oil(EPA 25%, DHA 10%) were investigated through active oxygen method (AOM, hrs. at $97.8^{\circ}C$), Oven test, polymer test by gel chromatography and coloring test. Although there were difference of antioxidative effect among commercial lecithins, antioxidative effects of the lecithins added to the fish oil increased with increasing the concentration of lecithin. Lecithin III(acetone insoluble content 65%) had the greatest antioxidative effect and the addition of 1%, 5 and 10% enhanced the oxidative stability to 310%, 620% and 840%, respectively. The results also showed that the polymerization in presence of 10% lecithin III did not occur up to 10 hours at the AOM condition, and the degree of color(Gardner number) increased as storage time went by and was accerated at high temperature.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.2
• /
• pp.231-236
• /
• 2016

The stability of DGPS signal in the DGPS service area was measured and the service availability according to the receiving signal strength was analyzed in this paper. Based on the effects of radio wave propagation in the seasons of winter and summer, daytime and night, the method to provide the DGPS service coverage was presented in this paper. The signal's strength of DGPS radio wave were measured at a constant distance from the DGPS reference station during a constant period. The propagation of DGPS radio wave is affected by status of ground conductivity, so the DGPS service area is dependant on the ground conductivity. To provide the stable service coverage, it is necessary to apply the adaptive power control for receiving signal's variations and the antenna design for alleviation of high elevation's radiation.

• Journal of Digital Convergence
• /
• v.15 no.3
• /
• pp.229-236
• /
• 2017

The purpose of this study was to review the study design, participants, intervention and its outcomes of studies for post-dura puncture headache using systematic review. Total 4234 studies were searched from 1980 to 2016 years,15 studies were included in final. Total 5239 patients were participated in studies, and 10 RCTs studies and 5 observational studies were included. The findings showed that experimental studies used the 24hr bedrest intervention as a control group for comparing the prevalence of headache with the early ambulation intervention group. The prevalence of headache in ambulation group was lower than 24hr bedrest group (except 2 studies). The high risk methodological bias should be considered when understandings the research findings. Based on this study, meta-analysis study for investigating the proper period of time for bedrest should be performed in further study.

• Journal of Aquaculture
• /
• v.17 no.4
• /
• pp.282-288
• /
• 2004

This study was carried out to improve water thestability of extruded shrimp feed. Three types of extruded shrimp feeds which were control diet (no steaming, no wheat gluten), steaming treated diet and steaming treated diet containing wheat gluten were prepared to using the pilot scale extruder. Comparing with the water stability values of two types of extruded shrimp feed, Steamed shrimp feed containing 4% (w/w) wheat gluten showed on I after 48 h was better than the control diet (no steaming, no wheat gluten) of which water stability value was 4. Also Penaeus chinensis fed on the steamed feed showed good body weight gain (237%) and feed efficiency (16.7%) compared with body weight gain (151%) and feed efficiency (12.8%) of control diet in the feeding trial for 50 days. Briefly, the extruded shrimp feed has more efficient water stability on below I, and recommendable wheat gluten content and steaming time were 4∼8% (w/w) and 5∼10 minutes.

• The KIPS Transactions:PartA
• /
• v.13A no.2 s.99
• /
• pp.177-184
• /
• 2006

Since well-known explicit methods for cloth simulation were regarded unstable for large time steps or stiff springs, implicit methods have been proposed to achieve the stability. Large time step makes the simulation fast, and large stiffness enables a less elastic cloth property. Also, there have been efforts to devise so-called semi-implicit methods to achieve the stability and the speed together. In this paper we improve Kang's method (Kang and Cho 2002), and thus devise a scalable method for cloth simulation that varies from an almost explicit to a full implicit method. It is almost as fast as explicit methods and, more importantly, almost as stable as implicit methods allowing large time steps and stiff springs. Furthermore, it has a less artificial damping than the previously proposed semi-implicit methods.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.50-50
• /
• 2019

최근 국지성 호우 및 하천 제방의 노후화로 인한 제방 붕괴 피해가 빈번히 발생하면서 제방의 안정성 및 표면 보강을 위한 다양한 연구가 시도되고 있다. 본 연구에서는 제방 붕괴에 따른 피해 최소화 및 대책을 수립하기 위한 방법으로 시멘트와 같은 지구온난화를 야기시키는 물질이 아닌 친환경 신소재 바이오폴리머를 흙과 혼합한 재료를 활용하여 제방의 내구성을 강화하기 위한 연구가 수행되고 있다. 이에 안동하천실증연구센터에서는 현장토를 사용하여 높이 1 m, 폭 3 m, 사면경사 1 : 2, 총 길이 5 m 의 중규모 제방모형을 제작하였으며, 공동연구기관인 카이스트에서 개발된 바이오폴리머와 흙을 적정 비율로 혼합한 바이오-소일을 제방 전면에 일정 두께로 피복하여 월류 발생에 따른 제방 안정성 평가 실험을 수행하였다. 1차 실험은 흙 제방 조건이며, 2 3차 실험은 제방 표면에 5 cm 두께로 신소재가 피복된 조건으로 안정된 결과 도출을 위해 반복 실험을 수행하였다. 제방 천단면 및 사면에서의 유속분포를 측정하기 위해 드론 및 비디오카메라를 활용한 LSPIV 기법을 적용하여 실험조건에 따른 표면유속과 월류 흐름이 제방 붕괴에 미치는 영향에 대해 비교분석하였다. 또한 그래픽 소프트웨어를 이용한 픽셀기반 영상분석 기법을 적용하여 시간에 따른 제방사면의 붕괴면적을 산정하여 신소재 피복에 따른 붕괴 지연효과 분석을 통한 신소재 활용 제방의 현장 적용가능성 및 안정성을 평가하였다. 본 연구결과, 흙 제방의 경우 월류 흐름 발생 직후 침식현상이 전개되어 유속분포가 집중되고 있었으며, 이후 발생하는 강한 수직흐름으로 인해 입자추적을 통한 분석이 더 이상 불가능하였다. 신소재 제방의 경우 월류 흐름 발생 직후 침식은 발생하지 않았으며 일정시간동안 유속분포가 유지되었다. 지속적인 월류 흐름으로 인해 제방 끝단에서 침식이 발생하였으며 이때 최대 유속은 3.3 m/s 로 나타났다. 또한 픽셀기반 분석을 통해 30초 단위로 표면손실률을 산정한 결과, 신소재 활용 제방(2, 3차)의 경우 같은 실험조건에도 불구하고 최종 붕괴시간은 약 3배의 차이를 보였으며, 양생 과정에서의 크랙 발생을 최소화한다면 월류 발생 시 상당한 붕괴지연효과가 있는 것으로 판단된다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.2
• /
• pp.174-179
• /
• 2009

We consider the stabilization problem for a class of networked control systems with neutral type of time delays. The neutral type of time-delays occur in controller-to-actuator and sensor-to-controller. The Takagi-Sugeno (T-S) fuzzy model is employed to represent a nonlinear system with neutral type of time-delays. The stabilization via state-feedback is first addressed, and delay-range-dependent stabilization conditions are proposed in terms of linear matrix inequalities (LMIs). Finally, an application example will be given to show the merits and design a procedure of the proposed approach.