• The Korean Journal of Air & Space Law and Policy
• /
• v.34 no.1
• /
• pp.39-77
• /
• 2019

Crew members engaged in international air transportation provide work in many countries due to the nature of their work. According to the Private International Act, the place where the employee habitually carries out his/her work plays an important role in the determination of the governing law of the international labor contract (Article 28, Paragraph 2) and in the decision of international jurisdiction (Article 28, Paragraphs 3 and 4). The concept of the place where the employee habitually carries out his/her work was proposed by the EU to determine international jurisdiction and governing law. In international aviation law, the legislative purpose of the place where the employee habitually carries out his/her work is different from that of home base, which is a concept introduced for fatigue management of the crew in order to secure the aviation safety; thus the place where the employee habitually carries out his/her work and home base are not the same concept. In order to determine the place where the employee habitually carries out his/her work, following matters should be considered comprehensively; (i) where the crew starts and ends work, (ii) where the aircraft the crew is performing work on is primarily parked, (iii) where the crew is informed of the instructions and organizes his/her work activities, (iv) where the crew is obliged to reside according to the labor contract, (v) where there is an office provided by the employer and available to the crew, (vi) where the crew is obliged to be when he/she is ineligible for the work or subject to discipline. However, since all of the above items are the same as the location of the home base, it is reasonable to consider the home base as the most important factor when deciding on the place where the employee habitually carries out his/her work. In contrast, the state where the aircraft is registered (Article 17 of the Chicago Convention), should not be regarded as a place of where the employee habitually carries out his/her work. In this case, CJEU provided the first judging standard for the concept of the place where the employee engaged in international air transportation habitually carries out his/her work. It is the interpretation of the Brussels regulations which became a model -for the Korean Private International Act,- so it would be helpful to understand the concept of the place where the employee habitually carries out his/her work.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.1
• /
• pp.65-73
• /
• 2019

In order to increase the production efficiency of the ship and shorten the production cycle, it is important to evaluate the accuracy of the ship components efficiently during the drying cycle. The accuracy control of the block is important for shortening the ship process, reducing the cost, and improving the accuracy of the ship. Some systems have been developed and used mainly in large shipyards, but in some cases, they are measured and managed using conventional measuring instruments such as tape measure and beam, optical instruments as optical equipment, In order to perform accuracy control, these tools and equipment as well as equipment for recording measurement data and paper drawings for measuring the measurement position are inevitably combined. The measured results are managed by the accuracy control system through manual input or recording device. In this case, the measurement result is influenced by the work environment and the skill level of the worker. Also, in the measurement result management side, there are a human error about the lack of the measurement result creation, the lack of the management sheet management, And costs are lost in terms of efficiency due to consumption. The purpose of this study is to improve the working environment in the existing accuracy management process by using the augmented reality technology to visualize the measurement information on the actual block and to obtain the measurement information And a smart management system based on augmented reality that can effectively manage the accuracy management data through interworking with measurement equipment. We confirmed the applicability of the proposed system to the accuracy control through the prototype implementation.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.4
• /
• pp.1-13
• /
• 2018

Both Platform as a Service (PaaS) as one of the cloud computing service models and the e-government (e-Gov) standard framework from the Ministry of the Interior and Safety (MOIS) provide developers with practical computing environments to build their applications in every web-based services. Web application developers in the geo-spatial information field can utilize and deploy many middleware software or common functions provided by either the cloud-based service or the e-Gov standard framework. However, there are few studies for their applicability and performance in the field of actual geo-spatial information application yet. Therefore, the motivation of this study was to investigate the relevance of these technologies or platform. The applicability of these computing environments and the performance evaluation were performed after a test application deployment of the spatial image processing case service using Web Processing Service (WPS) 2.0 on the e-Gov standard framework. This system was a test service supported by a cloud environment of Cloud Foundry, one of open source PaaS cloud platforms. Using these components, the performance of the test system in two cases of 300 and 500 threads was assessed through a comparison test with two kinds of service: a service case for only the PaaS and that on the e-Gov on the PaaS. The performance measurements were based on the recording of response time with respect to users' requests during 3,600 seconds. According to the experimental results, all the test cases of the e-Gov on PaaS considered showed a greater performance. It is expected that the e-Gov standard framework on the PaaS cloud would be important factors to build the web-based spatial information service, especially in public sectors.

• Korean Journal of Food Science and Technology
• /
• v.51 no.4
• /
• pp.316-323
• /
• 2019

It is difficult to analyze pymetrozine in citrus fruits using the hydromatrix method because of its low efficiency of purification and overlap of matrix and pymetrozine peaks. Liquid-liquid extraction can analyze pymetrozine in citrus fruits using dichloromethane. Since low pH interferes with the extraction of pymetrozine, the extracts of citrus fruits were maintained over pH 7.0 by adding borax buffer and 1 N NaOH in the improved method. According to the improved method, citrus fruits (such as lemon, lime, orange, tangerine, and grapefruit) were extracted and purified for HPLC-photo diode array analysis. The results of validation were as follows: $4.360{\mu}g/kg$ of limit of detection, $14.533{\mu}g/kg$ of limit of quantitation, and 0.007 mg/kg of method quantitative limit. Citrus fruits spiked with pymetrozine showed a recovery range from 71.8 to 83.7% and a coefficient of variation below 6%. Thus, the improved method can efficiently analyze pymetrozine in citrus fruits.

• Korean Journal of Heritage: History & Science
• /
• v.38
• /
• pp.129-156
• /
• 2005

Increasing discovery cases of underground storage facilities made of earth, wood, or stone are being reported from the recent excavation survey of the Baekje relics. Accordingly, the purpose of this study is to examine the structure and function of the underground storage facilities of Baekje following a classification made by the type and building method as follows: plask shape, wooden box shape, and stone box shape. The plask shape storage is the most representative underground storage of Baekje that has been found in numerous relics more than 600 sets around Hangang(Han River) and Geumgang(Geum River) from the Hansung period to Sabi period in Baekje Dynasty. It is a historical artefact as a part of the unique storage culture of Baekje around Hangang and Geumgang from the 3rd to 7th Century. Considering its structure and the example of Chinese one, it might had been used for a long-term storage of grains and various other items including earth wares. The storage facility in wooden box shape and stone box shape are found mostly in the relics Of Sabi period. Thus it might had taken some functions of the storage in traditional pouch shape which had decreased after the 6th Century. In particular, the wooden box shape and stone box shape storage required enormous labor force to build owing to their structure and building method. Thus, they were considered to had been used for official purposes in province fortress and citadel artefact. The wooden box shape storage facility is classified into flat rectangular type and square type based on the structure, and into Gagu type(架構式) and Juheol type(柱穴式) based on the building method. It might had been decided according to the geography and geological feature of the place where the storage was to be built. Considering the examples of Gwanbuk-ri relics and Weolpyong-dong relics, the wooden box shape storage facility might had been used for various items depending on the needs, including foods such as fruits and essential provisions at the military base. Considering the long-term food storage, the examples in Japan, and the functional characteristics of the underground storage facility, there is a possibility that the wooden and stone box shape storage facilities had been built so as to safely store important items in case of fire. This study is only a rudimentary examination for the storage facility in Baekje. Thus further studies are to be made specifically and comprehensively on the comparison with other regions, distribution pattern, discovered relics and artefacts, and functions.

• Journal of the Korean Orthopaedic Association
• /
• v.53 no.6
• /
• pp.513-521
• /
• 2018

Purpose: The purpose of this study was to assess the effectiveness and complications of an ultrasound-guided axillary brachial plexus block performed by orthopedic surgeons. Materials and Methods: From March to May 2017, an ultrasound-guided axillary brachial plexus block was performed on a total of 103 cases of surgery. A VF13-5 transducer from Siemens Acuson X300 was used. The surgical site was included in the range of the anatomic sensory distribution of the blocked nerve, except for the case where an operation time of more than 2 hours was expected due to multiple injuries and the operation of the upper arm. The procedure was performed by 2 orthopedic surgeons in the same method using 50 ml of solution (20 ml of lidocaine HCl in 2%, 20 ml of ropivacaine in 0.75%, 10 ml of normal saline in 0.9%). The success rate of anesthesia induction during surgery, anesthetic induction time, anatomical range of operation, duration of postoperative analgesia and complications were investigated. Results: The results from the 2 practices were similar. The anesthesia was successful in 100 out of 103 patients (97.1%). In these patients, the average needling time was 5.5 minutes (2.5-13.2 minutes), the average induction time to complete anesthesia was 18.4 minutes (5-40 minutes), and the average duration of postoperative analgesia was 402.8 minutes (141-540 minutes). The post-anesthesia immediate complications were dizziness in 1 case, nausea and vomiting in 4 cases, and peri-oral numbness in 2 cases, but surgery was performed without problems. All these 7 cases with complications recovered on the same day. A total of 3 cases failed with anesthesia, and they were treated by an injection with local anesthesia in the operation room in 2 cases and switched to general anesthesia in 1 case. Conclusion: An ultrasound-guided axillary brachial plexus block, which was performed by orthopedic surgeons allows anesthesia in a brief period and the high success rates of anesthesia for certain surgeries of the elbow and surgeries on forearm, wrist and hand. Therefore, it can reduce the waiting time to the operating room. This technique is a relatively safe procedure and dose selective anesthesia is possible.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.4
• /
• pp.198-215
• /
• 2020

Official development assistance refers to assistance provided by governments and other public institutions in donor countries, aimed at promoting economic development and social welfare in developing countries. The purpose of this research is to examine the construction process of the "Myanmar Cultural Heritage Management System" that is underway as part of the ODA project to strengthen cultural and artistic capabilities and analyze the achievements and challenges of the Digital Cultural Heritage ODA. The digital cultural heritage management system is intended to achieve the permanent preservation and sustainable utilization of tangible and intangible cultural heritage materials. Cultural heritage can be stored in digital archives, newly approached using computer analysis technology, and information can be used in multiple dimensions. First, the Digital Cultural Heritage ODA was able to permanently preserve cultural heritage content that urgently needed digitalization by overcoming and documenting the "risk" associated with cultural heritage under threat of being extinguished, damaged, degraded, or distorted in Myanmar. Second, information on Myanmar's cultural heritage can be systematically managed and used in many ways through linkages between materials. Third, cultural maps can be implemented that are based on accurate geographical location information as to where cultural heritage is located or inherited. Various items of cultural heritage were collectively and intensively visualized to maximize utility and convenience for academic, policy, and practical purposes. Fourth, we were able to overcome the one-sided limitations of cultural ODA in relations between donor and recipient countries. Fifth, the capacity building program run by officials in charge of the beneficiary country, which could be the most important form of sustainable development in the cultural ODA, was operated together. Sixth, there is an implication that it is an ODA that can be relatively smooth and non-face-to-face in nature, without requiring the movement of manpower between countries during the current global pandemic. However, the following tasks remain to be solved through active discussion and deliberation in the future. First, the content of the data uploaded to the system should be verified. Second, to preserve digital cultural heritage, it must be protected from various threats. For example, it is necessary to train local experts to prepare for errors caused by computer viruses, stored data, or operating systems. Third, due to the nature of the rapidly changing environment of computer technology, measures should also be discussed to address the problems that tend to follow when new versions and programs are developed after the end of the ODA project, or when developers have not continued to manage their programs. Fourth, since the classification system criteria and decisions regarding whether the data will be disclosed or not are set according to Myanmar's political judgment, it is necessary to let the beneficiary country understand the ultimate purpose of the cultural ODA project.

• Journal of Wetlands Research
• /
• v.24 no.4
• /
• pp.345-353
• /
• 2022

A wastewater treatment plant (WWTP) is a major gateway for the engineered nano-particles (ENPs) entering the water bodies. However existing studies have reported that many WWTPs exceed the No Observed Effective Concentration (NOEC) for ENPs in the effluent and thus they need to be designed or operated to more effectively control ENPs. Understanding and predicting ENPs behaviors in the unit and \the whole process of a WWTP should be the key first step to develop strategies for controlling ENPs using a WWTP. This study aims to provide a modeling tool for predicting behaviors and removal efficiencies of ENPs in a WWTP associated with process characteristics and major operating conditions. In the developed model, four unit processes for water treatment (primary clarifier, bioreactor, secondary clarifier, and tertiary treatment unit) were considered. Additionally the model simulates the sludge treatment system as a single process that integrates multiple unit processes including thickeners, digesters, and dewatering units. The simulated ENP was nano-sized TiO₂, (nano-TiO₂) assuming that its behavior in a WWTP is dominated by the attachment with suspendid solids (SS), while dissolution and transformation are insignificant. The attachment mechanism of nano-TiO₂ to SS was incorporated into the model equations using the apparent solid-liquid partition coefficient (Kd) under the equilibrium assumption between solid and liquid phase, and a steady state condition of nano-TiO₂ was assumed. Furthermore, an MS Excel-based user interface was developed to provide user-friendly environment for the nano-TiO₂ removal efficiency calculations. Using the developed model, a preliminary simulation was conducted to examine how the solid retention time (SRT), a major operating variable affects the removal efficiency of nano-TiO₂ particles in a WWTP.

• The Journal of the Korean Institute of Forest Recreation
• /
• v.22 no.4
• /
• pp.59-69
• /
• 2018

This is a cross-sectional study that suggests ways to activate forest welfare services (FWS) by investigating the infrastructure, service status, and perception on FWS in Korea. In August 2016, a structured email survey was conducted in nation widely. The respondents were mostly directors and general secretary (75.0%). The considerable number (16.3%) of nursing homes (NH) use some floors of the complex buildings that would be difficult to have FWS infrastructure and about 30% of those without forests near the facilities. The directors of NH recognize that FWS has positive effects on the elderly. However, FWS is not an requisite of the longterm care insurance benefit, and so costly and effort-intensive that FWS has not been activated so far. In order to activate FWS in NHs, it is necessary to develop and disseminate the guidelines on FWS that anyone can easily followed. In addition, when the National Health Insurance Corporation evaluates NHs, they should evaluate not only whether there is a wandering or walking space, but also whether it has forest healing factors such as forests. It is also necessary to create a barrier-free environment both inside and outside of NHs, increasing accessibility to the toilet in gardens, paving a passage for wheelchairs and lifts in forests near NHs. Through these efforts, it is expected that FWS will be activated to provide physical, mental rest and comfort, appropriate cognitive stimulation to the NH residents at the end of life.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.4
• /
• pp.188-197
• /
• 2020

Termites play an important role as decomposers of the forest ecosystem, while simultaneously causing enormous damage to wooden structures. Currently, two species of subterranean termites have been reported in Korea, and termite damage to historical wooden buildings is occurring nationwide due to climate change, forest fertility, and the locational characteristics of historical wooden buildings. Subterranean termites make their nests underground or inside timber. Termites move underground and access wooden structures through the lower parts of the buildings, adjacent to the ground. Once termites attack the wooden structures, it not only spoils the authenticity of cultural heritage structure, but also hampers structural stability due to the decrease in the strength of the material. Therefore, it is important to prevent termite damage before it occurs. Chemical treatments are mainly used in Korea to control and prevent the damage. In foreign countries, physical barriers are also used to prevent entry to wooden buildings, along with chemical treatments. Physical barriers involve installing nets or particles that termites cannot pass through in the lower part of the building, around the pipes, and between the edges of the building or exterior walls and interior materials. Advantages of a physical barrier are that it is an eco-friendly method, maintains long-term effect after installation, and does not require the use of chemical treatments. Prior to applying physical barriers, studies into the characteristics of termite species must be undertaken. In this study, we evaluated the minimum passage size that each caste of Reticulitermes speratus kyushuensis can move through. We found that workers, soldiers, and secondary reproductive termites were able to pass through diameters of 0.7mm, 0.9mm, and 1.1mm respectively. Head height of termites was an important factor in determining the minimum passing size. Results from the current study will be used as a basis to design the mesh size for physical barriers to prevent damage by termites in historical wooden buildings in Korea.