• Korean journal of applied entomology
• /
• v.61 no.1
• /
• pp.197-210
• /
• 2022

Entomopathogenic fungi can be used to control a variety of sucking and chewing insects, with little effect on beneficial insects and natural enemies. Approximately 170 entomopathogenic fungal insecticides have been registered and used worldwide, with the recent focus being on the mode of action and mechanism of insect-fungal interactions. During the initial period of research and development, the industrialization of entomopathogenic fungi focused on the selection of strains with high virulence. However, improvement in productivity, including securing resistance to environmental stressors, is a major issue that needs to be solved. Although conidia are the primary application propagules, efforts are being made to overcome the limitations of blastospores to improve the economic feasibility of the production procedure. Fungal transformation is also being conducted to enhance insecticidal activity, and molecular biology is being used to investigate functions of various genes. In the fungi-based pest management market, global companies are setting up cooperative platforms with specialized biological companies in the form of M&As or partnerships with the aim of implementing a tank-mix strategy by combining chemical pesticides and entomopathogenic fungi. In this regard, understanding insect ecology in the field helps in providing more effective fungal applications in pest management, which can be used complementary to chemicals. In the future, when fungal applications are combined with digital farming technology, above-ground applications to control leaf-dwelling pests will be more effective. Therefore, for practical industrialization, it is necessary to secure clear research data on intellectual property rights.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.30 no.1
• /
• pp.1-14
• /
• 2024

As awareness of environmental issues continues to grow, there is an escalating demand for recycling and repurposing byproducts of agricultural and food production processes and their conversion to high-value products. Coffee is the most widely consumed beverage globally; during coffee beverage processing and consumption, byproducts such as coffee silverskin (CS), spent coffee grounds (SCGs), and oil are generated. Despite containing beneficial materials such as cellulose, hemicellulose, lignin, lipids, and bioactive substances, these byproducts are typically discarded in landfills or incinerated. The utilization of CS, SCGs, and oil in the development of packaging materials holds significant potentials toward the realization of a sustainable society. To this end, considerable research efforts have been dedicated to the development of high-value materials derived from coffee byproducts, including functional fillers, polymer composites, and biodegradable polymers. Notably, CS and SCGs have been employed as functional fillers in polymer composites. Additionally, lipids extracted from SCGs have been used as plasticizers for polymers and cultured with microorganisms to produce biodegradable polymers. This review focuses on the research and development of polymer/CS and polymer/SCG composites as well as cellulose extraction and utilization from CS and SCGs and its applications, oil extraction from SCGs, and cultivation with microorganisms using extracted oil for polyhydroxyalkanoates(PHA) production.

• Journal of the Korea Convergence Society
• /
• v.8 no.8
• /
• pp.355-363
• /
• 2017

Jeju-do was designated as the 'first horse industry special zone' in 2014, followed by additional designation of horse industry special zones in Icheon, Yongin of Gyeonggi-do and Gyeongsangbuk-do in 2015. As a result, horses have become no more synonymous with Jeju-do. Jeju-do may see its competitive edge becoming blunt, compared to other local governments, due to its environmental characteristics and accessibility. The Korean proverb, "Send people to Seoul and horses to Jeju-do", has become an old saying that does not match reality. However, Jeju-do, designated as the first horse industry special zone, is expected to play a leading role in cultivation of domestic horse industry and faces a challenge of creating exemplary cases of success in transforming horse industry into the senary (6th) industry. In addition, KRW 114.2 billion is planned to be invested into 35 projects covering 9 sectors, including supply of elite domestic racing horses, expansion of demand basis for horse-riding, cultivation of horse meat industry, etc., by 2017 as envisioned by the horse industry special zone promotion plan. Despite expansion of facilities and demand base for horse-riding, those at the sites point out that government support at policy level has not come home to their hearts and criticism has been mounting that project efficiency remains low. Factors hindering the growth of horse industry, which have come to the fore, include inadequate supply of horse-riding facilities, limitation to expansion of demand for horse-riding, etc., due to excessive regulation. Advancement of horse industry requires wide-ranging deregulation on investment related to horse industry, including horse breeding and horse-riding facility installation, etc. Regulation which is deemed to be the biggest stumbling block to advancement of horse industry is related to the regulation requiring formation of farmland at horse-riding facilities in farming and fishery villages. Along with improvement in such regulations, horse-riding facilities without license should be legalized to promote qualitative growth of horse-riding industry. Moreover, efforts should be made to develop and deploy instructors with horse-riding license in order to develop horse-riding into a full-fledged leisure beyond simple experience auxiliary to tourism, thus ensuring that people can enjoy leisure style horse-riding regularly in safe and healthy manners. It would be necessary to add fresh momentum into efforts to turn Jeju-do into the hub of well-being leisure horse-riding by pooling our wisdom.

• Journal of Chest Surgery
• /
• v.35 no.7
• /
• pp.542-547
• /
• 2002

Background: Postpneumonectomy empyema(PPE) is an infrequent but potentially life-threatening complication. To date, various surgical efforts have been made to manage this complication. We reviewed our 20-year surgical experience of PPE and long-term follow-up data. Material and Method: Total of 37 patients who were treated for PPE between fan, 1980 and Jun, 2000 were included. Various clinical factors such as micro-organism, operative method and timing, presence of bronchopleural fistula(BPF), underlying disease and fate of empyema cavity were retrospectively reviewed and analyzed. Result: Majority of patients(34) underwent Eloesser operation for effective drainage. There was only one operative mortality. The causative organisms were Staphylococcus species and Pseudomonas species in 46% BPF was found in 20 cases, among which spontaneous closures took place in 4 cases. The chest wall was closed in 40%(8/20) of patients with BPF, compared to 59%(10/17) without BPF. The closure rate was statistically better in patients without BPF(p=0.006). Even though the patients with benign disease showed higher closure rate(50%) than those with lung cancer (31%), the difference was not significant(p=0.25). Conclusion: Eloesser procedure was an effective method for initial drainage of PPE cavity with low operative mortality. Given the findings of low spontaneous closure rate of BPF, aggressive approach to close the BPF is mandatory to achieve the final goal of chest wall closure. It was found that majority of patients still left their chest cavity opened, even after controlling the active inflammation of the empyema cavity. More aggnessive approach for chest wall closure is recommended in all patents with benign disease and in selective patients with lung cancer if there is no evidence of recurrence at several years after the initial operation.

• Journal of Food Hygiene and Safety
• /
• v.38 no.1
• /
• pp.1-11
• /
• 2023

Skin sanitizers are effective in killing or removing pathogenic microbial contaminants from the skin of food handlers, and the progressive growth of consumer interest in personal hygiene tends to drive product diversification. This review covers the advances in the application of efficacy tests for hand sanitizers to suggest future perspectives to establish an assessment system that is optimized to each product type (gel, liquid, and wipes). Previous research on the in vivo simulative test of actual consumer use has adopted diverse experimental conditions regardless of the product type. This highlights the importance of establishing optimal test protocols specialized for the compositional characteristics of sanitizers through the comparative analysis of test methods. Although the operational conditions of the mechanical actions associated with wiping can affect the efficacy of the removal and/or the inactivation of target microorganisms from the skin's surface, currently there is a lack of standardized use patterns for the exposure of hand sanitizing wipes to skin. Thus, major determinants affecting the results from each step of the overall assessment procedures [pre-treatment - exposure of sanitizers - microbial recovery] should be identified to modify current protocols and develop novel test methods. The ex vivo test, designed to overcome the limited reproducibility of in vivo human trials, is also expected to replicate the environment for the contact of sanitizers targeting skin microorganisms. Recent progress in the area of skin microbiome research revealed distinct microbial characteristics and distribution patterns after the application of sanitizers on hands to establish the test methods with the perspectives on the antimicrobial effects at the community level. The future perspectives presented in this study on the improvement of efficacy test methods for hand sanitizers can also contribute to public health and food safety through the commercialization of effective sanitizer products.

• Journal of the Korean Professional Engineers Association
• /
• v.28 no.4
• /
• pp.54-75
• /
• 1995

This synthesis has been prepared from a review of literature on Truck Escape Ramps technology and a survey of current practice by state department of transportation. Their locations have been determined usually from a combination of accident experience and en-gineering judgement, but new tools are emerging that can identify needs and sites without waiting for catastrophic accidents to happen. The Grade Severity Rating Systems holds promise in this regard. Design Procedures for truck excape ramps continue to evolve. Gravel arrester beds are clearly the preferred choice across the country Rounded aggregate, uniformly graded in the approximate size range of 13 to 18mm. Tech-nical publications typically have dassified TER types as paved gravity, sandpile, and ar-rester bed ramps. The design speed for vehicle entry into the ramp in critical to the deter-mination of ramp length. An escape ramp should be designed for a minimum entry speed of 130km/hr, a 145km/hr design being preferred. The ramps should be straight and their angle to the roadway align-ment should be as possible. The grade of truck escape ramps show the adjustment of ramp design to local topography, such as the tradeoff of ramp length against earthwork requirements. A width of 9 to 12m would more safety acommodate two or more outof con-trol vehicles. Reguarding comments on the most effective material, most respondents cited their own specification or referred to single graded, rounded pea gravel. The consensus essentially Is that single graded, well -rounded gravel is the most desirable material for use in arrester beds. The arrester beds should be constructed with a minimum aggregate depth of 30cm. Successful ramps have used depths between 30 and 90cm.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.10
• /
• pp.1475-1485
• /
• 2012

This study was conducted in order to understand nutrition teachers (dietitians)' perceptions of barriers to implementation of HACCP system in school foodservices in Gyeongnam, Korea. Questionnaires were distributed to 350 nutrition teachers (dietitians) from November to December of 2009, and 214 were collected and analyzed. The results of this study were as follows. First, nutrition teachers (dietitians) recognized the following as barriers in implementing the HACCP system: 'the status of facilities and utilities'> 'monitoring'> 'work satisfaction'> 'foodservice employees'> 'cooperation of HACCP team'> 'cooperation of persons concerned besides foodservice employees'> 'understanding the HACCP system'. Second, total working experience was found to be the factor most affecting 'cooperation of HACCP team (p<0.01)', 'cooperation of persons concerned besides foodservice employees (p<0.01)', 'foodservice employees (p<0.05)', and 'work satisfaction (p<0.05)'. Further, 'the status of facilities and utilities' was significantly affected by 'construction/reconstruction of kitchen (p<0.01)', 'division of kitchen area (p<0.01)', 'existence of preliminary preparation room (p<0.01)', and 'existence of dishwashing room (p<0.01)'. Third, dietitians perceived the following concerning hindrance factors of the HACCP system according to CCP stage: 'CCP 1'> 'CCP 3'> 'CCP 2, 'CCP 6'> 'CCP 4'> 'CCP 8'> 'CCP 7'> 'CCP 5'. In conclusion, this study showed that nutrition teachers (dietitians) in the Gyeongnam area recognized 'the status of facilities and utilities' from HACCP areas and 'CCP 1 (menu planning)' from CCP stages as the greatest barriers to implementing the HACCP system in school foodservices. To implement the HACCP system successfully in school foodservices, facilities and utilities should be properly equipped, and menu planning training for nutrition teachers (dietitian) should be conducted.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.1
• /
• pp.16-28
• /
• 2016

The study was conducted to compare and analyze the importance and performance of leisure destination selection attributes of persons who use recreational forests and rural tourism villages. This researcher investigated the use patterns of users to identify the ground for connection between recreational forest and rural tourism village, analyzed their recognition differences in physical selection attribute, program selection attribute, and service selection attribute in order for leisure destination selection, and conducted importance-performance analysis(IPA analysis) to draw a plan for connection. The main results and suggestions are presented as follows. First, recreational forests were visited by family users in order for rest and emotional cultivation and provided experience programs using simple public interest function of forest, whereas rural tourism villages were visited by family users, friends and co-workers, groups and club members to experience a variety of annual programs and understand regional cultures. It was found that it was necessary to connect natural forest with rural tourism village in order to meet the leisure needs of the people changed in diversified ways. Secondly, it was found that the connection between rural tourism village and recreational forest visited mainly for simple rest led to positive visit intention of users. It was expected that there will be various kinds of uses, including experience program participation, child education, and safe accommodations security. In other words, the connection between recreational forest and rural tourism village is an alternative to trigger actual demands and recreational forest activities with high quality. Thirdly, in the case of users of recreational forests, their performance of all selection attributes was lower than their importance of them. Therefore, overall improvements were needed. In particular, needed were the diversity, benefit, and promotion of programs, improvements in locality(themes), supply of lodges and convenient facilities, booking system, the purchase system of local special products, and professional skills of operators and managers. On contrary, the performance of program selection attribute of rural tourism village was high. Therefore, it was found that program attribute of rural tourism village was the main connection factor to activate recreational forest use. Fourthly, according to IPA analysis, the proper connections between loges, convenient facilities, and nearby touristattractions, which give high expectations and satisfaction to users, needed to remain. And it was required to make common efforts to accomplish the goal (income creation) of rural tourism village and improve booking system for visitors and performance of local special products sales opportunity. In addition, the essential factors to induce users' leisure destination selection were found to be maintenance of the use fee system of recreational forest, diversity of rural tourism village program, and retention of locality.

• Journal of the East Asian Society of Dietary Life
• /
• v.21 no.6
• /
• pp.934-947
• /
• 2011

The purpose of this study is to analyze products for good taste and convenience, which become an engine to constantly create customers. In addition, this study is aimed at investigating the relationship between the selective attributes of Home Meal Replacement, the perceived utilitarian value, and the repurchase intention, and drawing new suggestions on the Home Meal Replacement market from a new marketing perspective. Based on a total of 215 samples, this study reviewed the reliability and fitness of the research model and verified a total of 5 hypothesized using the Amos program. The result of study modeling was GFI=0.905, AGFI=0.849, NFI=0.889, CFI=0.945, and RMR=0.0.092 at the level of $x^2$=230.22 (df=126, p<0.001). First, the food quality (${\beta}$=0.221), convenience (${\beta}$=0.334), packing (${\beta}$=0.278), and employee service (${\beta}$=0.204) of home meal replacement consideration attributes had a positive (+) influence on perceived utilitarian value. Second, perceived utilitarian value (${\beta}$=0.584) had a positive (+) influence on repurchase intention. The factors to differentiate one company from other competitors in terms of the utilitarian value are the quality of food, convenience, wrapping, and services by employees. This study has illustrated the need to focus on the development of a premium menu to compete with other companies and to continue to research and develop nutritious foods that are easy to cook. Moreover, the key factors to have a distinct and constant competitive edge over other companies are the alleviation of consumer anxiety over wrapping container materials, the development of more designs, and the accumulation of service know-how. Therefore, it is necessary for a company to strongly develop the key factors based on its resources as a core capability.

• Korean Journal of Food Science and Technology
• /
• v.42 no.3
• /
• pp.263-268
• /
• 2010

This research was conducted to evaluate the occurrence of ochratoxin A (OTA) in coffee and fruit products in Korea. A total of 388 coffee and fruit product samples were collected from retail or outlet markets; 177 samples were coffee and 211 were fruits or their products. Analytical methods including AOAC and Comit$\acute{e}$ Europ$\acute{e}$en de Normalisation (CEN) were selected and modified by method validation to detect and quantify the OTA in samples. All samples were analyzed by liquid chromatography with fluorescence detection. OTA was detected in 3.9% of 177 kinds of coffee and 0% of 211 kinds of fruit products. The levels of OTA were $0.7-4.6\;{\mu}g/kg$ in green coffee, $0.3-4.8\;{\mu}g/kg$ in roasted coffee, $1.4\;{\mu}g/kg$ in mixed coffee, and $0.4-0.6\;{\mu}g/kg$ in instant coffee. However, OTA was not detected in liquid coffee, dried fruits, or grape juice. OTA levels of all samples detected were less than the European Union legislation of $5.0\;{\mu}g/kg$ in coffee, $10.0\;{\mu}g/kg$ in raisins and $2.0\;{\mu}g/kg$ in grape juice. Therefore, the risk of OTA in coffee and fruit products in Korea is relatively low at safe levels.