• Journal of Wetlands Research
• /
• v.8 no.3
• /
• pp.29-38
• /
• 2006

Digital Elevation Model (DEM) of intertidal flat can be widely used not only for scientific fields, coastal management, fisheries, ocean safety, military, but also for understanding natural and artificial topographic changes of the tidal flat. In this study, we generated DEM of the Ganghwado southern intertidal flat, the largest tidal flat in the west coast of the Korean Peninsula, using waterline method and interferometric synthetic aperture radar (InSAR). Constructed DEM which applied waterline method to the Landsat-5 TM and Landsat-7 ETM+ images closely expresses overall topographic relief of tidal flat. We found that the accuracy was determined by the number of waterlines which reflect various tidal conditions. The application of InSAR to the ERS-1/2 and ENVISAT images showed that only ERS-1/2 tandem pairs successfully generated DEM in the part of northern Yeongjongdo, but construction of DEM in the other areas was difficult due to the low coherence caused by a lot of surface remnant waters. In the near future, Kompsat-2 will provide satellite images having multi-spectral and high spatial resolution within a relatively short period at different sea levels. Application of waterline method to these images will help us construct a high precision tidal flat DEM. Also, we should develop DEM generation method using single-pass microwave satellite images.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.6
• /
• pp.591-598
• /
• 2020

The all revision of the Road Name Address Act, which contains the contents to be used by expanding the road name address as a means of indicationg the location, has been resloved by the National Assembly. Addresses will be assigned to large-sized facilities (3D mixed-use complex spaces). Here, the 3D (Three-dimensional) address is assigned an indoor path section in the inner passage, dividing the section at intervals. The 3D address will be built on the address information map. For 3D address, data should be built and managed for a 3D complex space(indoor space). Therefore, in this study, the object of the 3D address is defined based on the address conceptual model defined in the international standard, and the 3D address data model is proposed based on IndoorGML. To this, it is proposed as a method of mapping the Core and Navigation module of IndoorGML so that the entity of the 3D address can be expressed in IndoorGML. This study has a limitation in designing a 3D address data model only, but it is meaningful that it suggested a standard for constructing 3D address data in the future.

• 한국체육학회지인문사회과학편
• /
• v.57 no.1
• /
• pp.135-149
• /
• 2018

The aim of this study was to determine importance of coaching knowledge and university curriculum from the perspectives of physical activity lectures. This study focused on importance of knowledge on physical activity education, experiences of teaching methods classes and training programs, comparative importance of coaching knowledge and university education, perceived difficulties in coaching and solutions, and coaching related knowledge needed to learn in their university training. Data were collected from 112 physical activity lectures working in commercial, community, and school settings. Results from qualitative and quantitative data revealed that they perceived knowledge of sport pedagogy very important when coaching their classes or members. While they took fewer coaching methods classes in their universities, their experiences from the classes were helpful in coaching. The differences between perceived importance and the level of education were greater in the areas including consultation of members, management of membership, and communication with members. They tried to solve difficulties by themselves or wanted to discuss with colleagues and employers. If possible they also wanted to seek educational consulting. In order to acquire adequate coaching knowledge the lectures need to received systematic training regarding sports skills teaching methods, theories and practices of various sports, and planning of sports skills coaching while they were in university programs.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.441-441
• /
• 2021

우리나라의 홍수조절용댐은 총 5개소로 영산강유역에 두 개소와 한강유역에 세 개소가 있다. 한강유역에 있는 세 개소의 홍수조절지용댐은 한강상류의 북한지역에서 발생하는 집중호우에 대비하기 위한 댐으로, 임진강 하류지역의 수해방지를 위한 한탄강댐과 군남홍수조절지(군남댐)가 있으며 북한강 하류와 수도권의 홍수예방을 위한 평화의 댐이 있다. 영산강유역에 있는 두 개소의 홍수조절지는 2006년에 수립한 영산강치수종합대책에서 계획이 수립된 시설로 2011년 4대강 사업의 일환으로 설치하여 K-water에서 운영 중에 있다. 4대강 사업 이전의 영산강유역은 홍수량을 조절할 수 있는 홍수조절용량이 전무했던 실정으로 하도에서 홍수량의 전량을 수용해야했던 홍수에 매우 취약한 하천이었다. 그러나 4대강 사업을 통하여 영산강유역의 4대호를 비롯한 농업용댐의 숭상을 통한 홍수조절용량의 확보와 더불어 나주천변저류지와 담양홍수조절지, 화순홍수조절지를 설치하여 홍수로부터 상대적으로 안전한 하천으로 변모할 수 있었다. 그러나 영산강유역의 다른 하나의 과제는 여전히 남아있다. 우리나라의 하천 중에서 가장 수질이 악화되어 있는 하천이라는 불명예이다. 홍수조절지는 1년 중 3개월에 해당하는 홍수기에 사용할 수 있는 시설로 1년 중 9개월에 해당하는 비홍수기에는 홍수조절지의 효율적인 공간활용을 위하여 주민지원사업 등 다각도로 고민하여 사용하고 있으나 하천 외적인 문제를 수용하는 범주에 머무르고 있다. 하천이 가지고 있는 문제점을 다소라도 해소할 수 있는 목적으로 사용될 수 있다면 하천 외적인 문제를 수용하는 것 보다 하천 내적인 문제를 해소하는 목적으로 사용하는 것이 보다 바람직할 것으로 판단된다. 이를 위하여 영산강의 내적인 가장 큰 문제점은 수질악화로 인한 수질개선이라 할 수 있다. 따라서 홍수기로 한정되어 사용하는 홍수조절지를 해당하천의 내적인 문제를 다소라도 해소할 수 있는 공간으로 비홍수기에 기여할 수만 있다면 비홍수기의 활용목적을 확대하여 다목적조절지로의 변모가 필요하다고 판단한다. 따라서 본 연구에서는 영산강유역에 있는 담양홍수조절지와 화순홍수조절지의 두 개소 홍수조절지를 활용하여 영산강 수질개선에 기여할 수 있는 정도를 파악하였다. 비홍수기에 유출량의 일부를 조절지에 담수해 두었다가 수질개선 목적의 희석수로 방류하는 시나리오를 마련하여 시나리오별로 영산강의 수질개선효과를 분석하여 제시하였다. 수질개선효과를 분석하기 위하여 EFDC모델을 구축하고 모델 수행을 위한 시나리오는 조절지의 담수율과 방류량 그리고 조절지의 관리수질조건 등을 이용하여 작성하고 수질예측 결과에 따라 TOC, CHl-a, T-P 수질항목을 대상으로 수질개선효과를 분석하여 제시하였다.

• The Korean Journal of Franchise Management
• /
• v.2 no.1
• /
• pp.1-45
• /
• 2011

Franchising is one of the most effective strategies in promoting business establishment, creating jobs and accelerating economic growth. Thus, many countries in the world foster franchise business and support the franchise industry by enacting relevant regulations and making development policies. Vietnam deregulated franchise market through making franchise-related laws on June, 2005 and after joining WTO in 2009, Vietnamese government opened up the franchise market by letting foreign investors acquire 100% share on their investment in Vietnam. In addition, Vietnamese consumer's rapidly growing income and increasing liking for western life style make Vietnamese franchise market attractive and profitable. For this reason, many global franchise firms are competing to get the best seats. However, there has been no Korean attempt to profoundly study over Vietnamese franchise market. The purpose of this study would focus on analyzing and evaluating cases of Korean and international firms which successfully entered Vietnamese market and on proposing effective strategies and key success factors. The result of this study indicates that the companies successfully settled down to the Vietnamese market have developed marketing strategies which fit their strengths, and their common key success factors are 1) making the best of first mover advantage, 2) adapting themselves to local tastes and behaviors via systematic and scientific market research, 3) making thorough supervision on safety and hygiene, 4) doing strategy of firstly directly being operated and settled down by franchisor, later being managed by franchisees, 5) benchmarking both successful and failed cases in other countries.

• The Journal of Bigdata
• /
• v.7 no.1
• /
• pp.15-27
• /
• 2022

In the past five years, the fatality rate of single-vehicle accidents has been 4.7 times higher than that of all accidents, so it is necessary to establish a system that can detect and respond to single-vehicle accidents immediately. The IoT(Internet of Thing)-based real-time traffic accident recognition system proposed in this study is as following. By attaching an IoT sensor which detects the impact and vehicle ingress to the guardrail, when an impact occurs to the guardrail, the image of the accident site is analyzed through artificial intelligence technology and transmitted to a rescue organization to perform quick rescue operations to damage minimization. An IoT sensor module that recognizes vehicles entering the monitoring area and detects the impact of a guardrail and an AI-based object detection module based on vehicle image data learning were implemented. In addition, a monitoring and operation module that imanages sensor information and image data in integrate was also implemented. For the validation of the system, it was confirmed that the target values were all met by measuring the shock detection transmission speed, the object detection accuracy of vehicles and people, and the sensor failure detection accuracy. In the future, we plan to apply it to actual roads to verify the validity using real data and to commercialize it. This system will contribute to improving road safety.

• Journal of the Korean Geosynthetics Society
• /
• v.23 no.2
• /
• pp.9-17
• /
• 2024

When constructing on soft ground, managing ground settlement and safety is crucial. However, there often exists a significant disparity between the actual behavior of the ground and the design plans. In this study, we aimed to compare and analyze the difference between the predicted settlement based on theoretical formulas and the measured settlement during construction, in order to predict settlement. For this purpose, we analyzed settlement data from 18 construction sites. The results indicated that the back analysis settlement values were similar to the measured settlement values, whereas the design settlement values were significantly higher compared to the measured settlement values. Specifically, the design settlement values were 1.2 to 1.4 times higher than those derived from back analysis using measured values. The RMSE analysis revealed a value of 0.6212m for the design settlement and 0.1697m for the back analysis settlement. The difference between the back analysis settlement and the measured settlement was more than 70% lower than the difference between the design settlement and the measured settlement. This indicates that the back analysis settlement values exhibit lower error rates compared to the design settlement values.

• Journal of Korea Water Resources Association
• /
• v.57 no.6
• /
• pp.409-419
• /
• 2024

Climate change is already impacting sustainable water resource management. The influence of climate change on water supply from reservoirs has been generally assessed using climate change scenarios generated based on global climate models. However, inherent uncertainties exist due to the limitations of estimating climate change by assuming IPCC carbon emission scenarios. The decision scaling approach was applied to mitigate these issues in this study focusing on four reservoir watersheds: Chungju, Yongdam, Hapcheon, and Seomjingang reservoirs. The reservoir water supply reliablity was analyzed by combining the rainfall-runoff model (IHACRES) and the reservoir operation model based on HEC-ResSim. Water supply reliability analysis was aimed at ensuring the stable operation of dams, and its results ccould be utilized to develop either structural or non-structural water supply plans. Therefore, in this study, we aimed to assess potential risks that might arise during the operation of reserviors under various climate conditions. Using observed precipitation and temperature from 1995 to 2014, 49 climate stress scenarios were developed (7 precipitation scenarios based on quantiles and 7 temperature scenarios ranging from 0℃ to 6℃ at 1℃ intervals). Our study demonstrated that despite an increase in flood season precipitation leading to an increase in reservoir discharge, it had a greater impact on sustainable water management compared to the increase in non-flood season precipitation. Furthermore, in scenarios combining rainfall and temperature, the reliability of reservoir water supply showed greater variations than the sum of individual reliability changes in rainfall and temperature scenarios. This difference was attributed to the opposing effects of decreased and increased precipitation, each causing limitations in water and energy-limited evapotranspiration. These results were expected to enhance the efficiency of reservoir operation.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.26 no.3
• /
• pp.191-208
• /
• 2024

In this study, a hydro-mechanical-damage coupled analysis model was developed to evaluate the structural safety of radioactive waste disposal structures. The Mazars damage model, widely used to model the fracture behavior of brittle materials such as rocks or concrete, was coupled with conventional hydro-mechanical analysis and the developed model was verified via theoretical solutions from literature. To derive the numerical input values for damage-coupled analysis, uniaxial compressive strength and Brazilian tensile strength tests were performed on concrete samples made using the mix ratio of the disposal concrete silo cured under dry and saturated conditions. The input factors derived from the laboratory-scale experiments were applied to a two-dimensional finite element model of the concrete silos at the Wolseong Nuclear Environmental Management Center in Gyeongju and numerical analysis was conducted to analyze the effects of damage consideration, analysis technique, and waste loading conditions. The hydro-mechanical-damage coupled model developed in this study will be applied to the long-term behavior and stability analysis of deep geological repositories for high-level radioactive waste disposal.

• Journal of the Korean Professional Engineers Association
• /
• v.28 no.4
• /
• pp.54-75
• /
• 1995

This synthesis has been prepared from a review of literature on Truck Escape Ramps technology and a survey of current practice by state department of transportation. Their locations have been determined usually from a combination of accident experience and en-gineering judgement, but new tools are emerging that can identify needs and sites without waiting for catastrophic accidents to happen. The Grade Severity Rating Systems holds promise in this regard. Design Procedures for truck excape ramps continue to evolve. Gravel arrester beds are clearly the preferred choice across the country Rounded aggregate, uniformly graded in the approximate size range of 13 to 18mm. Tech-nical publications typically have dassified TER types as paved gravity, sandpile, and ar-rester bed ramps. The design speed for vehicle entry into the ramp in critical to the deter-mination of ramp length. An escape ramp should be designed for a minimum entry speed of 130km/hr, a 145km/hr design being preferred. The ramps should be straight and their angle to the roadway align-ment should be as possible. The grade of truck escape ramps show the adjustment of ramp design to local topography, such as the tradeoff of ramp length against earthwork requirements. A width of 9 to 12m would more safety acommodate two or more outof con-trol vehicles. Reguarding comments on the most effective material, most respondents cited their own specification or referred to single graded, rounded pea gravel. The consensus essentially Is that single graded, well -rounded gravel is the most desirable material for use in arrester beds. The arrester beds should be constructed with a minimum aggregate depth of 30cm. Successful ramps have used depths between 30 and 90cm.