• Economic and Environmental Geology
• /
• v.51 no.2
• /
• pp.99-111
• /
• 2018

In this study three target radionuclides ($^{60}Co$, $^{137}Cs$, and $^{125}Sb$) were reacted with solid samples collected from the nuclear facility sites to investigate their sorption and mobility behaviors for preparing unexpected nuclear accidents. The highest sorption distribution coefficients ($K_{ds}$) of target radionuclides ($^{60}Co=947mL/g$, $^{137}Cs=2105mL/g$, $^{125}Sb=81.3mL/g$) were found in topsoil layer under groundwater condition, and the $K_d$ values of three radionuclides decreased in the order of fractured rock and bedrock samples under the same groundwater condition. High $K_d$ values of $^{60}Co$ in topsoil layer and fracture rock resulted from the clay minerals present, and the $K_d$ values decreased 58-69 % under seawater condition due to high ionic strength. $^{137}Cs$ sorption was controlled by the ion exchange reaction with $K^+$ on flayed edge sites (FES) of mica. The $^{137}Cs$ sorption was the most affected by seawater (89-97 % decrease), while $^{125}Sb$ sorption was not much affected by seawater. As the results of column and batch experiments, the retardation factors (R) of $^{137}Cs$, $^{60}Co$, and $^{125}Sb$ were determined about 5400-7400, 2000-2500, and 250-415, respectively, indicating no significant transport for these radionuclides even in fractured zone with groundwater. These results suggest that even in the case of severe nuclear accident at the nuclear facilities the mobility of released radionuclides ($^{60}Co$, $^{137}Cs$, and $^{125}Sb$) can be significantly retarded by the topsoil layer and fractured rock. In addition, the results of this study will be used for the safety and environmental performance assessment of nuclear facilities.

• Korean Journal of Environmental Agriculture
• /
• v.38 no.4
• /
• pp.281-290
• /
• 2019

BACKGROUND: As the demand for strawberries increases, people are paying attention to food safety in strawberry, especially pesticide residues. To remove the pesticides from strawberry, various washing and processing technique in households are additionally required. METHODS AND RESULTS: Strawberries were washed with water, detergent, alcohol, and ultrasonication and processed to strawberry jam. The mean reduction efficiency according to the washing solvent and method was found to be higher in the order of detergent (42.5%) > alcohol (41.7%) > water (41.3%) > ultrasoniation with alcohol (40.2%) > ultrasoniation with water (38.6%) > ultrasoniation with detergent (36.9%), but there was no significant difference among the treatments. The residue levels of pesticides during processing to jam decreased by 11.9-94.4% for etoxazole, fluopyram, procymidone, spiromesifen, and prochloraz, while the other pesticides were concentrated by boiling, or rather increased by 11.8-40.2%. However, when the residue levels were converted to residual amounts in consideration of the change in weight after processing, the residual amounts of the tested pesticides were reduced by 59.8-98.4% during processing. The processing factor (PF) were different for each pesticide, but PFs were < 1 for all washing solvents and methods, and 0.06-1.40 when processed into jam. CONCLUSION: To ensure the consumption of pesticide-free strawberry, the most efficient washing method is to immerse the strawberry in fresh water for few minutes, followed by rinsing them under running water.

• Analytical Science and Technology
• /
• v.23 no.2
• /
• pp.187-195
• /
• 2010

To assess health risk for the intake among residents after the Hebei Spirit oil spill, 16 Polycyclic Aromatic Hydrocarbons (PAHs) in seafood samples from oil contaminated bay were determined by Gas Chromatography-Mass Spectrometry (GC-MSD) and samples were personally collected and purchased by residents. Samples were hydrolyzed with KOH and extracted with methylene chloride. The extracted solution were cleaned up using silica/florisil column and 16 PAHs were eluted by methylene chloride : n-hexane (1:9) mixture and determined by GC-MSD in Selected Ion Monitoring (SIM) mode. The mean recoveries for 16 PAHs ranged from 79% to 85%. The 16 PAHs levels in 126 samples ranged from 0.17 to $6.04\;{\mu}g$/kg and the TEQBaP (Toxic EQuivalents) levels in 126 samples were calculated using benzo(a)pyrene toxic equivalency factor for individual 16 PAHs and ranged from 0 to $0.91\;{\mu}gTEQ$/kg. The average Benzo(a)pyrene dietary exposure of residents was $5.5{\times}10^{-8}\;mg/kg$ bw/day and the average PAHs chronic dietary exposure was $1.3{\times}10^{-5}\;mg$ TEQ/kg bw/day. The margin of exposure (MOE) and the excess cancer risk and were $1.8{\times}10^6$ and $9.8{\times}10^{-8}$, respectively. Therefore, the assessment result was considered as low concern for health risk.

• Journal of Food Hygiene and Safety
• /
• v.16 no.1
• /
• pp.21-26
• /
• 2001

Risk assessment traditionally are conducted on individual chemicals; however, humans are exposed to multiple chemicals in daily life. The organophosphorus (OP) pesticides are considered in a single risk assessment because they act by a common mechanism of toxicity, and there is likely to be expose to multiple OP pesticides simultaneously or sequentially. The OP pesticides act by inhibiting the enzyme acetylcholinesterasc (AChE) and have available extensive database. AChE is widely distributed throughout the body, most importantly in the nervous system. Inhibition of AChE results in accumulation of acetylcholine in the nervous system that results in clinical signs of cholinergic toxicity, including increased salivation and lacrimation, nausea and vomiting, muscle fasciculation, lethargy and fatigue, among others. To conduct an exposure assessment for pesticides in the diet, we need to know the food consumption patterns of the populations, and the pesticide residue levels in the foods that are consumed. This study was conducted to identify cumulative dietary risk due to multiple OP pesticides that can be exposed through various foods. Total 22 food samples including cereals, vegetables and fruits were collected randomly two times from food markets in several sites (4 cities). The subjected foods were selected by regarding of highly consumed foods to general Korean people. The 12 OP pesticides including Acephate, Azinphos-methyl, Chlorpyrifos, and Diazinon were monitored. For the exposure assessment, general adult group of 60 kg body weight was regarded as target population and food consumption data suggested by Lee et al. (2000) were used as consumed value of individual food. Analyses of samples for OP pesticides have been carried out according to the multiclass multiresidue analysis method and acephate and methamidophos analysis method of Korea Food Code. In general the levels of OP pesticides found in the food samples were very low or not detected.

• Korean Journal of Environmental Agriculture
• /
• v.35 no.4
• /
• pp.278-285
• /
• 2016

BACKGROUND: Uptake patterns of ${\alpha}$-, ${\beta}$-isomers and sulfate metabolite of endosulfan (ED) by radishes grown in treated soils with ED concentrations of 2 and 10 mg/kg were investigated to establish soil management guidelines for ensuring the safety of radishes from ED residues. METHODS AND RESULTS: All samples of soils and radish plants separated into shoot and root parts were analyzed for ED residues using a gas-chromatography mass spectrophotometer, and the results were used to calculate the bioconcentration factor (BCF), indicating the ratio of ED concentrations between radishes and soils. During the experimental period, uptake and distribution rates of ED-sulfate in radishes were the highest, followed by ${\alpha}$- and ${\beta}$-ED. The BCF values to initial ED concentrations in soils were greater for root parts (0.0077 to 0.2345) than for shoot parts (0.0002 to 0.0429) and used to obtain regression equations by time. Long-term BCFs estimated by the obtained equations ($R^2$ of 0.86 to 1.00) were evaluated with the maximum residue limit (0.1 mg/kg) of ED for radishes, in order to suggest safe management guidelines of ED for radish-cultivating soils. CONCLUSION: Suggested guidelines showed the significant dependency on duration for radish cultivation and exposed concentration of ED in soil.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.25 no.5
• /
• pp.317-326
• /
• 2013

Probabilistic design methods can consider uncertainties of design variables and are widely used in the design of vertical breakwaters. The probabilistic design methods include a partial safety factor method, reliabilitybased design method, and performance-based design method. Especially the performance-based design method calculates the accumulated sliding distance during the lifetime of the breakwater or during a design storm. Recently a time-dependent performance-based design method has been developed based on the first-passage probability of individual sliding distance during a design storm. However, because the allowable criteria in the first-passage probability method are not established, the stability of structures cannot be quantitatively evaluated. In this study, the allowable first-passage probabilities for two limit states are proposed by calculating the first-passage probabilities for the cross-sections designed with various water depths and characteristics of extreme wave height distributions. The allowable first-passage probabilities are proposed as 5% and 1%, respectively, for the repairable limit state (allowable individual sliding distance of 0.03 m) and ultimate limit state (allowable individual sliding distance of 0.1 m). The proposed criteria are applied to the evaluation of the effect of wave-height increase due to climate change on the stability of the breakwater.

• KIPS Transactions on Computer and Communication Systems
• /
• v.6 no.11
• /
• pp.445-452
• /
• 2017

Electric pole is a supporting beam used for power transmission/distribution which accelerometer are used for measuring a external force. The meteorological condition has various effects on the external forces of electric pole. One of them is the elasticity change of the aerial wire. It is very important to perform modelling. The acceleration sensor is converted into a pitch and a roll angle. The meteorological condition has a high correlation between variables, and selecting significant explanatory variables for modeling may result in the problem of over-fitting. We constructed high deviance explained model considering multicollinearity using the Generalized Additive Model which is one of the machine learning methods. As a result of the Variation Inflation Factor Test, we selected and fitted the significant variable as temperature, precipitation, wind speed, wind direction, air pressure, dewpoint, hours of daylight and cloud cover. It was noted that the Hours of daylight, cloud cover and air pressure has high explained value in explonatory variable. The average coefficient of determination (R-Squared) of the Generalized Additive Model was 0.69. The constructed model can help to predict the influence on the external forces of electric pole, and contribute to the purpose of securing safety on utility pole.

• The Korean Journal of Pesticide Science
• /
• v.18 no.4
• /
• pp.330-335
• /
• 2014

This study was conducted to investigate residue levels of chlorantraniliprole and ethaboxam in inner part and outer leaves of a head-type Korean cabbage. Further, reduction of residues was measured after water washing, blanching and heat-cooking of the outer leaves. For chlorantraniliprole, residues in inner part and outer leaves were <0.01 mg/kg and 0.0757 mg/kg, respectively, in case of three-time spraying 30 days before harvest and <0.01 mg/kg and 1.19 mg/kg, respectively, in case of four-time spraying 10 days before harvest; for ethaboxam, <0.05 mg/kg and 0.216 mg/kg, respectively and <0.05 mg/kg and 1.18 mg/kg, respectively. Chlorantraniliprole and ethaboxam were not detected in inner part of the head-type Korean cabbage. Residue levels in outer leaves were very high as 10-100 fold as those in inner part of the cabbage. Therefore, there is no concern for safety of pesticide residues on kimchi prepared with the inner part of a head-type Korean cabbage. In addition, it needs to be noted that outer leaves should be carefully removed at harvest of the cabbage. Outer leaves water washed and blanched are called as Woogeogi, which is consumed after heat-cooking. In Woogeogi, residue concentrations of two compounds reduced to less than 10%, and further less than 5% by heat-cooking. This indicates that considerable amount of the test pesticide residues in outer leaves of a head-type Korean cabbage removed through water washing, blanching and heat-cooking.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.62-68
• /
• 2016

The feeder cable assembly is an automotive part used for telecommunication. If it malfunctions, the control and safety of the automobile can be put at risk. ALT (Accelerated Life Testing) is a testing process for products in which they are subjected to conditions (stress, strain, temperatures, etc.) in excess of their normal service parameters in an attempt to uncover faults and potential modes of failure in a short amount of time. Failure is caused by defects in the design, process, quality, or application of the part, and these defects are the underlying causes of failure or which initiate a process leading to failure. Thermal shock occurs when a thermal gradient causes different parts of an object to expand by different amounts. Thermal shock testing is performed to determine the ability of parts and components to withstand sudden changes in temperature. In this research, the main causes of failure of the feeder cable assembly were snapping, shorting and electro-pressure resistance failure. Using the Coffin-Manson model for ALT, the normal conditions were from Tmax = $80^{\circ}C$ to Tmin = $-40^{\circ}C$, the accelerated testing conditions were from Tmax = $120^{\circ}C$ to Tmin = $-60^{\circ}C$, the AF (Acceleration Factor) was 2.25 and the testing time was reduced from 1,000 cycles to 444 cycles. Using the Bxlife test, the number of samples was 5, the required life was B0.04%.10years, in the acceleration condition, 747 cycles were obtained. After the thermal shock test under different conditions, the feeder cable assembly was examined by a network analyzer and compared with the Weibull distribution modulus parameter. The results obtained showed good results in acceleration life test mode. For the same reliability rate, the testing time was decreased by a quarter using ALT.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.552-562
• /
• 2020

This study examined the effects of apartment complex management and residential quality on the residents' residential satisfaction and recommendation intentions. A survey was conducted on the residents of an apartment complex in Doan, Daejeon. Statistical analysis was analyzed using the SPSS 25.0 program. Exploratory factor analysis (EFA) was carried out to verify the validity of the measurement tools for apartment complex management, residential quality, living satisfaction, and recommendation intention. The Cronbach's α coefficient was evaluated to verify the reliability of the measurement tools. Multi-regression analyses were conducted to verify the research hypotheses. As a result, the following main results were derived. First, maintenance factors and living management factors among apartment complex management factors were found to have a significant effect on the residents' residential satisfaction. Second, among the factors of residential quality in apartment complexes, convenience, safety, comfortability, and economy had a significant effect on residential satisfaction. Third, residential satisfaction had a significant effect on the recommendation intention. Overall, the factors of apartment complex management and residential quality affecting residential satisfaction and recommendation intentions were derived.