한국해안·해양공학회논문집 (Journal of Korean Society of Coastal and Ocean Engineers)

  • 제25권5호
  • /
  • Pages.317-326
  • /
  • 2013
  • /
  • 1976-8192(pISSN)
  • /
  • 2288-2227(eISSN)
한국해안·해양공학회 (Korean Society of Coastal and Ocean Engineers)
권호 표지
DOI QR코드

DOI QR Code

직립방파제의 케이슨 활동에 대한 최초통과확률법의 허용기준 산정

Evaluation of Allowable Criteria in First-Passage Probability Method for Caisson Sliding of Vertical Breakwater

  • Kim, Seung-Woo (US Army ERDC(Coastal and Hydraulics Laboratory, US Army Engineer Research and Development Center)) ;
  • Suh, Kyung-Duck (Department of Civil and Environmental Engineering & Engineering Research Institute)
  • 투고 : 2013.03.13
  • 심사 : 2013.10.29
  • 발행 : 2013.10.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

확률론적 설계법은 설계변수의 불확실성을 고려할 수 있기 때문에 직립방파제의 설계에 폭넓게 사용되고 있다. 대표적인 확률론적 설계법은 부분안전계수 설계법, 신뢰성 설계법, 성능설계법 등이 있다. 특히 성능설계법은 구조물의 수명 또는 설계폭풍 지속시간 동안의 누적활동량을 계산한다. 최근 설계폭풍 동안에 개별활동량의 최초통과확률을 산정할 수 있는 시간의존 성능설계법이 개발되었다. 하지만 개발된 방법의 허용기준이 없어 구조물의 안정성을 정량적으로 평가할 수 없었다. 본 연구에서는 다양한 수심과 극치파고분포의 특성을 반영한 구조물의 단면에 대하여 최초통과확률을 산정함으로써 두 가지 한계상태에 따른 허용최초통과확률을 제안하였다. 수리가능한계상태(개별 허용활동량 0.03 m)와 극한한계상태(개별 허용활동량 0.1 m)에서 허용최초통과확률은 각각 5%와 1%로 산정되었다. 제안된 허용기준을 적용하여 기후변화에 따른 파고 증가가 방파제 안정성에 미치는 영향을 평가하였다.

Probabilistic design methods can consider uncertainties of design variables and are widely used in the design of vertical breakwaters. The probabilistic design methods include a partial safety factor method, reliabilitybased design method, and performance-based design method. Especially the performance-based design method calculates the accumulated sliding distance during the lifetime of the breakwater or during a design storm. Recently a time-dependent performance-based design method has been developed based on the first-passage probability of individual sliding distance during a design storm. However, because the allowable criteria in the first-passage probability method are not established, the stability of structures cannot be quantitatively evaluated. In this study, the allowable first-passage probabilities for two limit states are proposed by calculating the first-passage probabilities for the cross-sections designed with various water depths and characteristics of extreme wave height distributions. The allowable first-passage probabilities are proposed as 5% and 1%, respectively, for the repairable limit state (allowable individual sliding distance of 0.03 m) and ultimate limit state (allowable individual sliding distance of 0.1 m). The proposed criteria are applied to the evaluation of the effect of wave-height increase due to climate change on the stability of the breakwater.

키워드

참고문헌

  1. Burcharth, H.F. (1992). Uncertainty related to environmental data and estimated extreme events, Final report of PIANC Working Group 12, Group B.
  2. Burcharth, H.F. and Sorensen, J.D. (2005). Optimum safety levels for breakwaters, Proc. Coastline, Structures and Breakwaters, London, UK, 20-22.
  3. Goda, Y. (1974). A new method of wave pressure calculation for the design of composite breakwater, Proc. 14th Int. Conf. Coast. Eng., 1702-1720.
  4. Kim, S.-W. (2012). Probabilistic analysis of caisson sliding of vertical breakwater considering climate change impacts. PhD dissertation, Seoul National University.
  5. Kim, S.-W. and Suh, K.-D. (2013). Performance analysis of vertical breakwaters designed by partial safety factor method. J. Coast. Res., SI 65, 296-301.
  6. Kim, S.-W. and Suh, K.-D. (2009a). Reliability analysis and evaluation of partial safety factors for sliding of caisson breakwaters in Korea. Journal of Korean Society of Coastal and Ocean Engineers, 21(4), 278-289 (in Korean).
  7. Kim, S.-W. and Suh, K.-D. (2009b). Exceedance probability of allowable sliding distance of caisson breakwaters in Korea. Journal of Korean Society of Coastal and Ocean Engineers, 21(6), 495-507 (in Korean).
  8. Kim, S.-W., Kim, S.-Y., and Suh, K.-D. (2012a). Influence of water depth on climate change impacts on caisson sliding of vertical breakwater. Journal of Korean Society of Coastal and Ocean Engineers, 24(3), 179-188 (in Korean). https://doi.org/10.9765/KSCOE.2012.24.3.179
  9. Kim, S.-W., Cheon, S., and Suh, K.-D. (2012b). Development of Time-Dependent Reliability-Based Design Method Based on Stochastic Process on Caisson Sliding of Vertical Breakwater. Journal of Korean Society of Coastal and Ocean Engineers, 24(5), 305-318 (in Korean). https://doi.org/10.9765/KSCOE.2012.24.5.305
  10. Kim, T.-M. and Takayama, T. (2003). Computational improvement for expected sliding distance of a caisson-type breakwater by introduction of a doubly-truncated normal distribution, Coast. Eng. J., 45(3), 387-419. https://doi.org/10.1142/S0578563403000816
  11. KPHA (2005) Korea Port and Harbor Association, Design Standards for Harbors and Fishery Ports (in Korean).
  12. Lee, C.-E. (2009). Evaluation of partial safety factors on sliding of monolithic vertical caisson of composite breakwaters. Journal of Korean Society of Coastal and Ocean Engineers, 21(4), 267-277 (in Korean).
  13. Lee, C.-E., Kim, S.-W., Park, D.-H. and Suh, K.-D. (2012). Target reliability of caisson sliding of vertical breakwater based on safety factors. Coast. Eng., 60, 167-173. https://doi.org/10.1016/j.coastaleng.2011.09.005
  14. Miche, M. (1951). Le Pouvoir Reflechissant des Ouvrages Maritimes Exposes a l'Action de la Houle, Annals des Ponts et Chaussess, 121e Annee, 285-319 (translated by Lincoln and Chevron, University of California, Berkeley, Wave Research Laboratory, Series 3, Issue 363, June 1954).
  15. Shimosako, K. and Tada, T. (2003). Study on the allowable sliding distance based on the performance design of composite breakwaters. Proc. Coastal Eng., JSCE 50, 766-770 (in Japanese). https://doi.org/10.2208/proce1989.50.766
  16. Shimosako, K. and Takahashi, S. (2000). Application of deformation-based reliability design for coastal structures. Proc. Int. Conf. Coastal Struct., A. A. Balkema, Spain, 363-371.
  17. Smith, J. M., Resio, D. T. and Vincent, C. L. (1997). Currentinduced breaking at an idealized inlet. Proc. Coastal Dynamics '97, ASCE, 993-1002.
  18. Suh, K.-D., Kim, S.-W., Mori, N., and Mase, H. (2012). Effect of climate change on performance-based design of caisson breakwaters. J. Waterw., Port, Coastal, and Ocean Eng., 138(3), 215-225. https://doi.org/10.1061/(ASCE)WW.1943-5460.0000126
  19. Takahashi, S., Shimosako, K. and Hanzawa, M. (2001). Performance design for maritime structure and its application to vertical breakwaters - Caisson sliding and deformation-based reliability design. Proc. Advanced design of maritime structures in the 21st century, 63-75.
  20. Takahashi, S., Tanimoto, K. and Shimosako, K. (1994). A proposal of impulsive pressure coefficient for the design of composite breakwaters. Proc. Int. Conf. Hydro-Technical Eng. for Port and Harbor Constr. (Hydro-Port '94), Yokohama, Japan, 489-504.