• Proceedings of the Korea Database Society Conference
• /
• 2000.11a
• /
• pp.186-197
• /
• 2000

기업의 해체 이후 등장한 인터넷 비즈니스 기업들은 기존의 오프라인 기업들과는 달리 비즈니스에 의한 수익을 올리지 못하고 있다. 아직도 임계점에 도달하지 못해서 그런 것일까\ulcorner 아니면 기존의 수익 구조로는 어떤 한계가 있는 것일까\ulcorner 많은 연구에서 인터넷 비즈니스는 선점의 효과를 강조하고 있다. 경쟁에서 먼저 임계점에 도달한 인터넷 기업들은 주가로 보상을 받고 있기도 하다. 그러나, 임계점에 도달한 기업이 아직도 비즈니스에 의한 수익의 창출에는 그다지 성과를 올리지 못하고 있는 것 같다. 본 연구에서 주장하는 것은 다음의 두 가지이다. 첫째는, 인터넷 비즈니스 기업들은 임계점을 중시한 나머지 수익 구조에 대한 전략의 수립에 실패하였다. 둘째는, 인터넷 비즈니스 기업들은 기존의 오프라인 기업들과는 달리 온라인 기업 중심으로 이루어 졌기 때문에 기존의 오프라인 기업들과는 근본적으로 다른 수익 구조를 가져야 할 것이다. 즉, 기존의 온라인 기업들의 사업 방식과는 달라야 한다. 누구나 흉내낼 수 있는, 그래서 경쟁상의 우위를 지속적으로 유지시키기가 어려운, 운영의 효율성 중심이 아닌, 어떤 차별화된 전략을 가져야 할 것이다.

• KEPCO Journal on Electric Power and Energy
• /
• v.2 no.2
• /
• pp.211-221
• /
• 2016

The increase of world's population and economic development are the keys drivers behind growing demand for energy. Especially the demand for electricity would eventually result in an increase of coal usage. Therefore ultra supercritical circulating fluidized bed boiler has been developed as solutions of economic eco-friendly technologies for coal and of increasing supplies of low grade fuels. Ultra supercritical circulating fluidized bed boiler has an once through type of steam cycle different from drum type in subcritical circulating fluidized bed boiler. Also, the duplication of a proven commercial module with 100-300 MWe subcritical circulating fluidized bed might be the key for design of 500~800 MWe ultra supercritical circulating fluidized bed boiler. After 2017, ultra supercritical circulating fluidized bed boiler might become standard model over subcritical circulating fluidized bed boiler. Therefore, this paper will help you to understand ultra super critical circulating fluidized bed (USC-CFB) through describing the background, status and prospect of the CFB technology.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.597-600
• /
• 2010

Cold flow injection test was conducted to investigate the characteristics of cryogenic liquid nitrogen jet at sub to supercritical condition. Single jet injector element was installed in high pressure chamber to investigate the effect of ambient pressure around the jet, injector geometry and flow conditions. Experimental results showed obvious differences between jet characteristics under subcritical and supercritical condition. Effect of injector inlet shape also was investigated.

• Applied Chemistry for Engineering
• /
• v.16 no.5
• /
• pp.609-613
• /
• 2005

Daidzein and genistein were extracted from Korean soybean by supercritical $CO_2$ and sub/supercritical water. The extracted sample was analyzed by reversed-phase high performance liquid chromatography (RP-HPLC). The retention time, retention factor, column efficiency, column selectivity and resolution of aglycons were compared with the change in the temperature and pressure of supercritical fluid and ethanol concentration. The characteristics of extraction of daidzein and genistein were more affected by ethanol concentration using supercritical $CO_2$. The most desirable extraction yield was obtained by supercritical $H_2O$ with $400^{\circ}C$ and 250 bar. Generally, the extraction yield of aglycons increased over 10 times using supercritical $CO_2$ than sub/supercritical $H_2O$.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.5
• /
• pp.353-363
• /
• 2017

The dynamics of a water-steam system in a once-through boiler was simulated based on the physics-based modeling approach, representing the system in response to large load change or scale disturbance simulations. The modeling considered the mass, energy conservation, and momentum equation in the water pipe and the focus was limited to the sub-critical pressure region. An evaporator tube modeling was validated against the reference data. A simplified boiler system consisting of economizer, evaporator, and superheater was constructed to match a 500 MW power boiler. The dynamic response of the system following a disturbance was discussed along with the quantitative response characteristics. The dynamic response of the boiler system was further evaluated by checking the case of an off-design point operation of the feedwater-to-fuel supply ratio. The results re-emphasized the significance of controlling the feedwater-to-fuel supply ratio and additional design requirements of the water-steam separator and spray attemperator.

• Resources Recycling
• /
• v.33 no.1
• /
• pp.48-57
• /
• 2024

This study aimed to improve utilization of the Class C vinyl waste generated in rural areas based on a preliminary investigation on the use of eco-powder, generated through pyrolysis, as a raw material for plastic. The efficiency of pre-processing treatments in controlling ash content of the generated eco-powder and its effect on the basic properties of manufactured plastic were evaluated. The basic properties included ash content of the compressed eco-powder at different levels of ash content, impact strength, flexural strength, and tensile strength. The experimental results confirmed that pre-processing improved the separation efficiency of soil particles and vinyl waste through physical impact. The eco-powder with ash content of less than or equal to 26% was found to satisfy the target performance during impact strength, flexural strength, and tensile strength evaluation. Thus, it was confirmed that the Class C vinyl waste, having low utilization and recovery rates, could be effectively utilized as a plastic raw material after optimum thermal treatment and physical processing using the eco-powder.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.5
• /
• pp.32-39
• /
• 2018

Supercritical injection behavior of liquid hydrocarbon compounds, which are used as main components of propellant fuel, was analyzed. Decane and Methylcyclohexane (MCH) with different critical points were selected as experimental fluid and Shadowgraphy technique was used. Decane and MCH behave differently in the initial state under the subcritical condition. However, near the critical point, the enthalpy of evaporation became close to 0, so that phase change into supercritical fluid occurred, not vaporization process, and no breakup of both fluids occurred.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.7
• /
• pp.85-93
• /
• 2003

Droplet vaporization at various ambient pressures is studied numerically by formulating one dimensional evaporation model in the mixture of hydrocarbon fuel and air. The ambient pressure ranged from atmospheric conditions to the supercritical conditions. The modified Soave-Redlich-Kwong state equation is used to account for the real gas effects in the high pressure condition. Non-ideal thermodynamic and transport properties at near critical and supercritical conditions are considered. Some computational results are compared with Sato's experimental data for the validation of calculations. The comparison between predictions and experiments showed quite a good agreement. The droplet lifetime increases with increasing pressure at temperature lower than the critical temperature, however, it decreases with increasing pressure at temperature higher than the critical temperature. The solubility of nitrogen can not be neglected in the high pressure and it becomes higher as the temperature and the pressure go up.

• Journal of Life Science
• /
• v.18 no.2
• /
• pp.213-219
• /
• 2008

Flavonoids in pine needles are known to be effective scavengers of free radical. Especially, proanthocyanidin, a kind of flavonoids possesses cardiovascular protection and antioxidative activities. Here, we evaluated proanthocyanidin contents in total polyphenolic compounds of pine needle extracts prepared by using hot water, ethanol, hexane or sub-supercritical $CO_2$. Analyses of total polyphenolic compounds and proanthocyanidin in each extracts indicated that hot water extract contained the highest concentrations, but sub-supercritical extract contained the lowest concentrations. On the other hand, evaluation of proanthocyanidin contents in total polyphenolic compounds in each extracts showed that sub-supercritical extract possessed the highest content, but hot water extract possessed the lowest content. These results indicate that extracts containing high concentrations of both total polyphenolic compounds and proanthocyanidin could be obtained by using hot water or ethanol extractions. Furthermore, extract containing high content of proanthocyanidin out of total polyphenolic compounds could be achieved by using sub-supercritical extraction. Measurement of antioxidative activities of extracts showed that hot water extract possessed the highest activity. In this study, we prepared extracts from pine needles by four different methods and evaluated the antioxidative compounds in extracts that could be used for effective components of functional food products.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.6
• /
• pp.44-50
• /
• 2006

To characterize thermo-chemical feature of su gar conversion of woody biomass poplar wood (Populus alba${\times}$glandulosa ) by sub- and supercritical water was treated for 60s under subcritical (23 MPa, 325 and $350^{\circ}C$) and supercritical (23 MPa, 380, 400, and $425^{\circ}C$) conditions, respectively. Among degradation products undegraded poplar wood solids existed in aqueous products. As the treatment temperature increased, the degradation of poplar wood was enhanced and reached up to 83.1% at $425^{\circ}C$. The monomeric sugars derived from fibers of poplar wood by sub- and supercritical treatment were analyzed by high performance anionic exchange chromatography (HPAEC). Under the subcritical temperature ranges, xylan, main hemicellulose component in poplar wood, was preferentially degraded to xylose, while cellulose degradation started at the transition zone between sub and supercritical conditions and was remarkably accelerated at the supercritical condition. The highest yield of monomeric sugars amounts to ca. 7.3% based on air dried wood weight (MC 10%) at $425^{\circ}C$.