DOI QR코드

DOI QR Code

관류보일러 물-증기 계통의 동적 시뮬레이션 - 아임계 동력보일러 사례 -

Dynamic Simulation of the Water-steam System in Once-through Boilers - Sub-critical Power Boiler Case -

  • Kim, Seongil (Dept. of Mechanical Engineering, Korea Advanced Institute of Science and Technology) ;
  • Choi, Sangmin (Dept. of Mechanical Engineering, Korea Advanced Institute of Science and Technology)
  • 투고 : 2016.08.30
  • 심사 : 2017.02.16
  • 발행 : 2017.05.01

초록

부하변동과 외란에 따른 관류보일러 물-증기 계통의 동적 거동을 물리적 모델링 접근방법으로 모사하였다. 본 논문에서는 수관의 질량, 에너지와 운동량 방정식을 고려한 아임계 영역의 동적 모사를 보고한다. 500MWe 급의 절탄기, 증발기와 과열기로 이루어진 단순한 보일러 시스템을 가정하였고, 증발기 모델링은 참고문헌 데이터와 검증을 진행 하였다. 이 시스템에 대하여 외란에 따른 정량적 응답특성을 살펴보았다. 또한, 수연비(증기량과 연료의 유량비)가 설계조건과 크게 다른 탈 설계 운전 사례에 대한 보일러 시스템의 동적 응답평가를 진행 하였다. 그 결과를 통해 적절한 수연비의 제어와 재순환 시스템과 분무 감온기 설계의 중요성이 재확인 되었다.

The dynamics of a water-steam system in a once-through boiler was simulated based on the physics-based modeling approach, representing the system in response to large load change or scale disturbance simulations. The modeling considered the mass, energy conservation, and momentum equation in the water pipe and the focus was limited to the sub-critical pressure region. An evaporator tube modeling was validated against the reference data. A simplified boiler system consisting of economizer, evaporator, and superheater was constructed to match a 500 MW power boiler. The dynamic response of the system following a disturbance was discussed along with the quantitative response characteristics. The dynamic response of the boiler system was further evaluated by checking the case of an off-design point operation of the feedwater-to-fuel supply ratio. The results re-emphasized the significance of controlling the feedwater-to-fuel supply ratio and additional design requirements of the water-steam separator and spray attemperator.

키워드

참고문헌

  1. Adams, J., Clark, D.R., Louis J. R. and Spanbauer, J. P., 1965, "Mathematical Model of Once-Through Boiler Dynamics," IEEE Trans. on Power Systems, Vol. 84, pp.146-156. https://doi.org/10.1109/TPAS.1965.4766165
  2. Ray, A. and Bowman H. F., 1976, "A Nonlinear Dynamic Model of a Once-Through Subcritical Steam Generator," ASME Trans. on Dynamic System, Measurement, and Control, Vol. 98, pp. 332-339. https://doi.org/10.1115/1.3427046
  3. Jensen, J. M. and Tummescheit H., 2002, "Moving Boundary Models for Dynamic Simulations of Two-Phase Flows," Proc. of the 2nd Int. Modelica Conference, Oberpfaffenhofen, Germany, pp. 235-244.
  4. Li, Y. Q. and Ren, T. J., 2009, "Moving Boundary Modeling Study on Supercritical Boiler Evaporator: By Using Enthalpy to Track Moving Boundary Location," Power and Energy Engineering Conference, Wuhan, China, pp. 1-4.
  5. Timo, Y. F., Koykka, P. and Majanne, Yrjoo, 2011, "A Generalized Dynamic Water Side Model for a Once-Through Benson Boiler," The 18th IFAC World Congress, Milano, Italy, pp. 7049-7054.
  6. Pan, J., Yang, D., Chen, G., Zhou, X. and Bi, Q., 2012, "Thermal-hydraulic Analysis of a 600MW Supercritical CFB Boiler with Low Mass Flux," Applied Thermal Engineering, Vol. 32, pp. 41-48. https://doi.org/10.1016/j.applthermaleng.2011.08.009
  7. Zhu, X., Wang, W. and Xu, W., 2015, "A Study the Hydrodynamics Characteristics of a Vertical Water Wall in a 2953t/h Ultra-supercritical Pressure Boiler," International Journal of Heat and Mass Transfer, Vol. 86, pp. 404-414. https://doi.org/10.1016/j.ijheatmasstransfer.2015.03.010
  8. Pan, J., Wu, G. and Yang, D., 2015, "Thermal-hydraulic Calculation and Analysis on Water Wall System of 600MW Supercritical CFB Boiler," Applied Thermal Engineering, Vol. 82, pp. 225-236. https://doi.org/10.1016/j.applthermaleng.2015.03.004
  9. Fan, Y., Xu, Z. and Chen, L., 1998, "Model and Simulation of Steam Generator in Supercritical Once Through Boiler(I)," Proceedings of the CSEE, Vol. 18, pp. 350-356. (in Chinese)
  10. Fan, Y., Xu, Z. and Chen, L., 1998, "Model and Simulation of Steam Generator in Supercritical Once Through Boiler(II)," Proceedings of the CSEE, Vol. 18, pp. 350-356. (in Chinese)
  11. Go, G. and Moon, U. C., 2014, "A Water-Wall Model of Supercritical Once-Through Boilers Using Lumped Parameter Method," J. Electr. Eng. Technol., Vol. 9, pp. 1900-1908. https://doi.org/10.5370/JEET.2014.9.6.1900
  12. Chaibakhsh, A., Ghaffari, A. and Moosavian, A. A., 2007, "A Simulated Model for a Once-through Boiler by Parameter Adjustment Based on Genetic Algorithms," Simulation Modelling Practice and Theory, Vol. 15, pp. 1029-1051. https://doi.org/10.1016/j.simpat.2007.06.004
  13. Lee, K. Y., Heo, J. S., Hoffman, J.A., Kim S.H. and Jung, W.H., 2007, "Neural Network-Based Modeling for A Large-Scale Power Plant," Power Engineering SocietyGeneral Meeting, IEEE, pp.1-8.
  14. Liu, X.J., Kong, X.B., Hou, G.L. and Wang, J.H., 2013, "Modeling of a 1000MW Power Plant Ultra-supercritical Boiler System using Fuzzy-neural Network Method," Energy Conversion and Management, Vol. 65, pp. 518-527. https://doi.org/10.1016/j.enconman.2012.07.028
  15. Go, G., Park, C. and Moon, U., 2013, "A Study on Evaporator and Superheater Model of Once-Through Boiler," 44th KIEE SYMSOIUM, pp. 1510-1511.
  16. Kim, E., Jang, Y. and Cho, S., 2000, "Feed Water Flow Control of Super Critical Once Through Boiler in Korea Standard Power Plant," Institute of Control, Robotics and Systems Symposium, pp. 2043-2045.
  17. Lee, J. and Jeong, T., 2009, "A Study of Superheater Temperature Control on an Once Through Boiler in Thermal Power Plant.," The Transaction of The Korean Institute of Electrical Engineering, Vol. 58, pp. 2022-2027.
  18. Lee, J., Lim, I, Park, D., Yu, K. and Byun S., 2011, "A Study of Reheater Temperature Control on an Once Through Boiler in 500MW Thermal Power Plant," 2011 KIEE Symposium, pp. 1838-1839.
  19. Kim., J., Jung, C., Choi, I. and Woo, J., 2008, "Analysis on the Control Logics of an Once-through Boiler in a Power Plan.," 2008 KIEE SYMSOIUM, pp. 1669-1670.
  20. Lee, K., Lee, D. and Cho, C., 2000, "Development of Dynamic Simulation Software for Power Plant and its Application to Once-Through Boiler," 2000 KSME Symposium, pp. 656-661.
  21. Lee, J, Lee, C. and Ma, B, 1999, "The Simulation Study of Boiler Drum Level Controller in Thermal Power Plant," 1999 The Korea Society for Simulation Symposium, pp.218-223.
  22. Kim, H. and Choi, S., "A Water Level Dynamics Model in the Drum of Natural Circulation Boiler," 2003 KSME Symposium, pp. 173-178.
  23. Park, K., Kong, J. and Seo, J., 1991, "Develpoment of Nonlinear Models for Drum Boiler," 1991 KIEE Symposium, pp. 390-393.
  24. Eitelberg, E. and Boje, E., 2004, "Water Circulation Control during Once-through Boiler Start-up," Control Engineering Practice, Vol. 12, pp. 677-685. https://doi.org/10.1016/S0967-0661(03)00153-9
  25. Trangbaek, K., 2006, "Low Load Model of a Once-through Boiler with Recirculation," IFAC Symposium on Power Plant and Power Systems Control, Kananakis, Canada, pp. 303-308.
  26. Incropera, F., P., Dewitt, D., P., Bergman, T., L. and Lavine., 2008, Fundamentals of Heat and Mass Transfer, John Wiley & Sons, Inc, New York.
  27. Gungor, K. E. and Winterton, R. H. S., 1986, "A General Correlation for Flow Boiling in Tubes and Annuli," Int. J. Heat Mass Transfer, Vol. 29, pp. 351-358. https://doi.org/10.1016/0017-9310(86)90205-X
  28. Claxton, K., Collier, J. G. and Ward, L.A., 1972, "Correlations for Two-phase Pressure Drop and Void Fraction in Tubes," HTFS-DR15 Part B (AERER7162).
  29. Release on the IAPWS (The International Association for the Properties of Water-Steam Properties) Industrial Formulation 1997 for the Thermodynamic Properties of Water and Steam, 1997, IAPWS Meeting, Erlangen, Germany.
  30. Kim, S., Choi, S. and Yang, J, 2016, "Dynamic Simulation of a Circulating Fluidized Bed Boiler System Part I: Description of the Dynamic System and Transient Behavior of Sub-models," Journal of Mechanical, Science and Technology, Vol. 30, pp. 5781-5792. https://doi.org/10.1007/s12206-016-1148-8