• Explosives and Blasting
• /
• v.17 no.4
• /
• pp.18-31
• /
• 1999

The explosive forming has been used for many year to expand tubes into tubesheets. this process has demonstrated ability to direct carefully the energy of an explosive to expand tubes into tubesheet holes without damaging the tubesheet and without causing the excessive cold work at the tube I.D. that is normally associated with mechanical expansion. The success of explosive tube expansion provided the background for the development of the explosive tube plug. The main results are as follows : (1) The optimum explosives and explosive qualities are PETN, RDX, HMS and about 18~31gr/ft of explosive plugging in nuclear steam generator. (2) Explosive plugging's thickness is 0.9~1.8mm. If groove of 0.4 mm formed in plug outside, For the hydraulic leakage is go up, explosive plugging of formed groove are applicate tube and tubrplate. (3) Sheath is designed on the polyethylene of low density, In thermal impact test of the $430^\circ{C}$, hydraulic leakage is $300kg/cm^2$. (4) About 10~60mm oxide inclusions are existed on the space of explosive plug and tube protect to the leakage.

• Explosives and Blasting
• /
• v.17 no.4
• /
• pp.32-50
• /
• 1999

This study deals with interface charactristics of tube and tubesheet of the nuclear steam generator by the explosive expansion in order to take advantage of optimum expansion ratio, pull-out strength and leakage tightness and improvement of the resisitance on the stress corrosion cracking for low residual stress. The paper also show the relationship between roll, hydraulic and explosive expansion. The results obtain are as follows (1) Because of the explosive bonding is to use the high speed pressure and energy by the explosive, workability is good, bonding region is homogenous (2) Expansion ratio is 2.7%, Pull-out strength 850kg, Leakage strength $500kg/cm^2$. Clearance gap is 10~30mm in case of explosive expansion and interface structure of the tube and tubesheet is optimum condition. (3) As the transition region of the explosive expansion is inactive, the resistance of the stress corrosion cracking is increases 30~40% compare to the roll and hydraulic expansion.

• Journal of Aerospace System Engineering
• /
• v.3 no.1
• /
• pp.36-41
• /
• 2009

Quad-rotor is one kind of a rotorcraft in Unmanned Aerial Vehicle (UAV), which consists of four rotors in total and fixed-pitch blades located at the four corners. This vehicle is emerging as popular platform for UAV research due to the simplicity of its construction, the ability of hovering and the vertical take-off and landing (VTOL) capability, etc. Because of those specific capabilities, this vehicle can be applied to many fields: search and rescue, mobile sensor networks, fire observation, etc. However a quad-rotor is much affected by the disturbance due to the characteristics of structure. So this vehicle needs attitude control for stabilizing. In this paper, we design the control law for automatic stabilization. The PID controller is used to control a brushless DC motor. And an accelerometer is used to measure the roll and pitch angles of a quad-rotor.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.217-220
• /
• 2000

The SrBi$_2$Ta$_2$O$\_$9/(SBT) thin films are deposited on Pt-coated electrode(Pt/TiO$_2$/SiO$_2$/Si) using RF sputtering method. The SBT thin films deposited on substrate at 400-500[$^{\circ}C$]. SBT thin film deposited on Pt-coated electrodes have the cubic perovskite structure and polycrystalline state. With increasing annealing temperature from 600[$^{\circ}C$] to 850[$^{\circ}C$], flourite phase was crystallized to 650[。 and Bi-layered perovskite phase was crystallize ed above 700[$^{\circ}C$]. The maximum remnant polarization and the coercive electric field is 11.73[${\mu}$C/$\textrm{cm}^2$], 85[kV/cm] respectively at annealing temperature of 750[$^{\circ}C$]. The fatigue characteristics of SBT thin films deposited on Pt/TiO$_2$/SiO$_2$/Si substrate did not change up to 10$\^$10/ switching cycles.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.32 no.6
• /
• pp.444-447
• /
• 2019

It was proven that the light outputs of blue GaN-based light-emitting diodes (LEDs) was seriously influenced by the application of external stress. We have simulated the wave function overlap of an electron and hole, which are significantly reduced by the development of stress. Consequently, its internal quantum efficiency decreased from 67.0% to 37.5%. To experimentally investigate the effect of stress, we designed and prepared a special zig system. By applying external tensile stress to compensate for the compressive stress innately developed in Blue LEDs, it was found that the optical output was greatly enhanced from 83.1 mcd to 117.2 mcd at a current of 100 mA, an increase of approximately 41%. In contrast, when the compressive stress is developed more by external compressive stress, we observed that the light output power was reduced from 89.0 mcd to 80.7 mcd, a decrease of approximately 9.3%.

• Polymer(Korea)
• /
• v.25 no.4
• /
• pp.558-567
• /
• 2001

The syntheses of thermal latent catalysts have been carried out by modifying the substituent of pyrazinium salts. The thermal latent properties and cure behaviors of difunctional epoxy resin (diglycidylether of bisphenol-A, DGEBA) with 1 wt% of catalyst as an initiator were investigated by dynamic DSC method. As a result, the synthesized catalysts showed the good latent thermal properties in epoxy system. With increasing the basicity of substituted catalyst, the cure temperature and activation energy of epoxy system were increased, whereas the activity was decreased. This was probably due to the fact that the activity and cure behavior were controlled by ring strain and basicity of substituent. Consequently, the catalyst activity modified by methyl group as an electron donor was decreased in increasing of basicity in an initiation step of epoxy cure system. This is due to a decreasing of stabilities of both leaving group of pyrazinium salts and benzyl cation. However, the catalyst activity modified by cyano group as an electron acceptor was increased in increasing the stability of benzyl cation resulting from organic effects and resonance.

• Journal of the Korean Society of Costume
• /
• v.66 no.5
• /
• pp.82-98
• /
• 2016

Korea and Japan have a cultural homogeneity because they were affected by China. However, each country has developed its own original culture due to their own national characteristic and endemism, In traditional clothing, though Korea and Japan share the same origin, they have developed their own form, Hanbok and Kimono, which have completely different looks. The differences in the traditional clothing is the result of the differences in each country's aesthetic sense, which is reflects in the artwork of those days. Ink-and-wash painting was the typical painting form in East Asia, so Korean and Japanese ink-and-wash painting from that period can be used to observe the differences in the aesthetic sense. This study aims to search for commonly shared aesthetic sense in the design process of Hanbok and Kimono by analyzing the styles of a representative Korean painting, "Sehando(Wintry Days)" and a representative Japanese painting, "Pine Trees Screen". H. Wolfflin's methodology influenced not only painting, but also architecture and sculpture. Therefore, this theory can be applied to clothing, which can be considered a type of sculpture. Modernization of traditional clothing has to start by analyzing the aesthetic sense of artisans that have affected the design of traditional clothing. To spread Hanbok globally and differentiate it from Japanese clothing, we have to acknowledge the differences between Korean and Japanese aesthetic sense, and based on this, we have to develop the design of Hanbok.

• KSBB Journal
• /
• v.24 no.1
• /
• pp.65-69
• /
• 2009

The biological production of a potent anticancer agent, epothilone, by Sorangium cellulosum was carried out using flask and fermentor cultures. Soluble starch was selected as the main carbon source and the concentrations of lactose and yeast extract were optimized at 4 and 0 g/L, respectively, when using the flask cultures. In the fermentor cultures, the cells were cultivated at a high DO level of more than 80% of air saturation in the growth stage and then the DO level was controlled at about 50, 20 or 1-2% when the carbon source was exhausted. The epothilone production increased with decreasing DO level after the exhaustion of the carbon source, and the maximum concentration of epothilone was 5.4 mg/L. It was found that the DO level had significant regulation effects on the epothilone production.

• Journal of Korean Society of Transportation
• /
• v.31 no.3
• /
• pp.45-54
• /
• 2013

Korea Expressway Corporation has been utilizing vehicles equipped with dedicated short range communication (DSRC) based on-board equipment (OBE) for collecting path travel times. A path based method (PBM) estimates the path travel time using probe vehicles traveling whole links on the path, so it is not always possible to obtain sufficient samples for calculating path travel time in the DSRC system. Having this problem in utilizing DSRC for travel time information, this study attempted to estimate path travel time with the help of a link based method (LBM) and examined whether the LBM can be used for obtaining reliable path travel times. Some comparisons were made and identified that the MAPE difference between the LBM and the PBM estimates are less than 3%, signaling that LBM can be used as a proxy for PBM in case of sparse sample conditions. Some limitations and a future research agenda have also been proposed.

• Horticultural Science & Technology
• /
• v.28 no.5
• /
• pp.783-789
• /
• 2010

The effective method for heating root-zone during winter season was studied in the aspects of growth, yield and economics for tomato ($Solanum$ $lycopersicum$) in perlite bag culture. There were four root-zone heating treatments: two hours heating from one hour before to one hour after sunrise, four hours from two hours before to two hours after sunrise, 15 hours after sunset, and no heating. The growth characteristics of the upper parts of plants were not significantly different among the treatments, but root volume increased with longer heating of the root zone. The Plant Development Index, using stem diameter and the length between growing tip and the upper flowering truss, showed relation between yield per cluster and growth pattern. The treatment heating for four hours was the most economic in terms of growth and yield of tomato.