• 대한기계학회논문집
• /
• 제10권6호
• /
• pp.906-915
• /
• 1986

본 논문에서는 에너지 법칙(energy principle)에 기초한 AE RMS값과 절삭 파 라미터들 사이의 해석적인 관계를 구하기 위하여 Lee와 Shaffer의 미끄름선장 영역을 변형되는 부피로 가정하여 이론적인 식을 제시하였으며 Al의 2차원 절삭시험을 통하여 이 관계가 절삭과정의 감시에 유용하리라는 것을 확인하였다.

• 한국정밀공학회지
• /
• 제14권12호
• /
• pp.66-72
• /
• 1997

This paper aims at reviewing the possibility application over normal or abnormal, detection used by AE and the wear characteristics of grinding process. In this study, when diamond bur in dentistry with chosen grinding conditions were tuned at grinding. The variation of grinding resistance and AE signal is detected by the use of AE measuring system. The tests are carried out in accordance with diamond burs and workpiece: arcyl and bovine. According to the experiment results, the following can be expected: AE has the possibility to detect the state normality and abnormality. Hpwever, the grinding resistance measuring can find it difficult to detect it. It can be accurately excepted from AE occurrence pattern in contact start point of diamond bur and bovine, grinding condition and derailment point. It is known that AErms is well compatible with grinding resistance. According to the increase of the material removal rate, the specific energy of the diamond bur is inclined to dectease and the grinding resistance has a tendency to increase.

• 대한전자공학회논문지SD
• /
• 제40권6호
• /
• pp.408-420
• /
• 2003

이 논문에서는 1) 넓은 잠금 범위를 위한 이중 루프 동작과 2) 차세대 패키지 스큐 개선에 대한 전압 발생기와 안티퓨즈 회로를 사용한 프로그래머블 레프리카 딜레이, 두 가지 이점을 갖는 Delay Lock Loop(DLL)을 기술하였다. 이중 루프 동작은 차동 내부 루프 중 하나를 선택하기 위해 외부 클럭과 내부 클럭 사이의 초기 시간차에 대한 정보를 사용한다. 이를 이용하여 더 낮은 주파수로 DLL의 잠금 범위를 증가시킨다. 덧붙여서, 전압발생기와 안티퓨즈 회로를 사용한 프로그래머블 레프리카 딜레이의 결합은 패키지 공정 후에 온-오프 칩 변화로부터 발생하는 외부 클럭과 내부 클럭 사이에 스큐 제거를 해준다. 제안된 DLL은 0.16um 공정으로 제조되었고, 2.3v의 전원 공급과 42㎒ - 400㎒의 넓은 범위에서 동작한다. 측정된 결과는 43psec p-p 지터와 400㎒에서 52㎽를 소비하는 4.71psec 실효치(rms)지터를 보여준다.

• 대한기계학회논문집
• /
• 제12권2호
• /
• pp.241-251
• /
• 1988

본 연구에서는 숫돌입자, 결합자 및 기공으로 조성된 연삭숫돌의 구조를 다공질 포성체로 보고, WA계 비트리파이드(vitrified) 및 레지노이드(resinoid) 결합자의 연삭숫돌시험편에 대하여 AE 계측방법을 이용한 인장, 압축, 굽힘 및 압렬시험을 실시하여 Babel과 Sines의 2축응력장해소이론과 연삭숫돌의 파괴조건을 관련시켜 평가함과 동시에, 이 때 검출되는 AE 신호 처리 파라미터(Parameter) 로부터 연삭숫돌의 자인자가 파괴강도 및 AE특성에 미치는 영향을 구명하여 파괴의 예지및 연삭숫돌수명의 예측가능성등의 파괴강도특성을 평가고찰하였다.

• 비파괴검사학회지
• /
• 제11권1호
• /
• pp.31-37
• /
• 1991

Acoustic emission(AE) signals detected during metal cutting were applied as the experimental test to sensing tool wear and chipping on the NC vertical milling machine. The in-process detection of cutting tool wear including chipping, cracking and fracture has been investigated by means of AE in spite of vibration or noise through intermittent metal cutting, then the following results were obtained 1) When the tool wear is increased suddenly, or the amplitude of AE signals changes largely, it indicates chipping or breaking of the insert tip. 2) It was confirmed that AE signal is highly sensitive to the cutting speed and tool wear. 3) At the early period of cutting, the wear were large and RMS value increased highly by the influence of minute chipping and cracking, etc. Therefore, the above situations should be considered for the time when the tool would be changed.

• 한국기계가공학회지
• /
• 제1권1호
• /
• pp.15-22
• /
• 2002

This study shows how the change of helix angle of different helix angle end mill affects machining accurracy. It was verified that cutting force are remarkably low when endmill has helix angle of different helix angle 250, 310, 370 and AE signal have less reationshap with the change of helix angle. Moreover, as the number of rotations are increases, the AE signal increased with the proportion to the number but cutting force are inversely proportional to the rotation.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.239-244
• /
• 2002

This study shows how the change of helix angle for different helix angle end mill affects machining accuracy. It was verified that cutting forces are remarkably low when endmill has helix angle of different helix angle $25^{\circ}\;, \; 31^{\circ}\; , \; 37^{\circ}$and AE signals have less relationship with the chance of helix angle Moreover, as the number of rotations are increased, the AE signals are increased with the proportion to the number but cutting forces are inversely proportional to the rotation.

• 한국생산제조학회지
• /
• 제6권2호
• /
• pp.112-118
• /
• 1997

Characteristics of AE(Acoustic Emission) signal is related to cutting conditions, tool materials, and tool geometry in metal cutting. Relation between AE signal and tool wear was investigated experimentally. Experiment is carried out by interrupted cutting for SCM420 workpiece with TiN coating tool on HSS material. AE RMS voltage and count per event were increased according to tool wear. The major results are as follows : 1) AE RMS value is nearly constant as cutting speed changes, but is rapidly increase as feed rate increases. 2) AE RMS value and Count per Event increase as tool wear increases. 3) It is more effective to monitor tool wear by Incremental rate of AE RMS value than by Incremental rate of count per event.

• 한국정밀공학회지
• /
• 제16권1호통권94호
• /
• pp.26-33
• /
• 1999

Automatic monitoring of cutting process is one of the most important technologies for increasing the stability and the reliability of unmanned manufacturing system. In this study, basic methods which use the acoustic emission (AE) signals and cutting forces were proposed to monitor flank wear (width of flank wear) quantiatively. First, in order to detect flank wear, it was investigated that the influence of cutting conditions, that is, cutting velocity, feed and depth of cut, on AE signals (${AE_rms}$) and cutting forces. Furthermore, the relation between flank wear and the measured signals (${AE_rms}$, cutting force) was discussed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.414-418
• /
• 1996

This paper aims at reviewing the possibility application over normal or abnormal, detection used by AE and the characteristics of grinding process. In this study, when diamond bur in dentistry with chosen grinding conditions were tuned at grinding. The variation of grinding resistance and AE signal is detected by the use of AE measuring system. The tests are carried out in accordance with diamond burs and workpiece: arcyl and cowteeth. According to the experiment results, the following can be expected; AE has the possibility to detect the state normality and abnormality. However, the grinding resistance measuring can find it difficult to detect it. It can be accurately excepted from AE occurrence pattern in contact start point of diamond but and cowteeth, grinding condition and derailment point. It is known that AErms is well compatible with grinding resistance.