본 연구에서는 알루미늄 마스크를 이용하여 다결정 실리콘 결정립의 수평성장을 유도하는 새로운 엑시머 레이저 어닐링 방법을 제안한다. 제안된 방법은 비정질 실리콘 박막 위에 알루미늄 패턴을 형성하여 선택적으로 레이저 빔을 차단시키고, 액상 실리콘의 열을 금속박막을 통해 방출시킴으로써 다결정 실리콘 결정립의 수평성장을 유도할 수 있다. 제안된 레이저 결정화 방법을 이용하여 최대 1.6${\mu}m$의 수평성장 결정립을 형성하였고, 알루미늄 패턴의 경계로부터 결정립을 성장시킴으로써 결정립 경계의 위치를 제어하였다. 제안된 방법을 이용하여 제작한 다결정 실리콘 박막 트랜지스터는 기존의 다결정 실리콘 박막 트랜지스터에 비해 전계효과 이동도 및 온/오프 전류비 등의 전기적 특성이 우수하였다.
The phase transformation in a film influences its surrounding. Effects of the precrystallization method, which removes influences on gate oxide caused by lateral crystallization, in metal-induced unilaterally crystallized polycrystalline silicon thin-film transistor devices and circuits were studied. Device by the method was shown to have a higher current drive, compared with conventional postcrystallized device. Moreover, we studied DC bias-induced changes in the performance of ring oscillator. PMOS inverters fabricated using precrystallized silicon films have very high dynamic and stable performance, compared with inverters fabricated using postcrystallized silicon films.
초고집적 반도체 제조에 널리 쓰이고 있는 티타늄 실리사이드 박막의 형성 조건에 따른 특성을 분석하였다. 실리콘 웨이퍼 위에 티타늄 박막을 스퍼터링 방식으로 증착하고, 급속 열처리(RTA) 방식으로 실리사이드화 온도 및 시간을 변화시켰다. 박막의 깊이에 따른 조성변화를 측정하기 위하여 AES 및 RBS 분석을, 결정구조의 분석을 위하여 XRD를, 전기적 특성을 평가하기 위하여 4-point probe로 면저항($R_s$)을측정하였다. 열처러 온도가 $500^{\circ}C$에서 부터 티타늄과 실리콘의 혼합이 일어나기 시작하여, $600~700^{\circ}C$에서는 거의 대부분의 티타늄이 2배 정도의 실리콘과 $Tisi_2$ 형성에 필요한 조성을 이루었으나, 반도체 공정에서 목표로 하는 전기전도성을 가지는 C54 $Tisi_2$ 결정구조를 형성하기 위해서는 $700^{\circ}C$이상에서 30초 이상의 열처리 조건이 필요하였다. 특히 열처리전에 이입되기
쉬운 산소 및 질소 등이 티타늄과 실리콘의 혼합과 실리사이드 결정화에 중요한 영향을 미치며, 이를 방지하기 위하여 티타늄 표면을 비정질 실리콘으로 덮은 경우에 C54 $Tisi_2$의 형성이 쉽게 이루어지는 효과가 관찰되었다.
Proceedings of the Korean Vacuum Society Conference
/
2016.02a
/
pp.244.2-244.2
/
2016
폴리 실리콘 박막은 저온 안정성, 산화 안정성, 가스 투과성 및 전기재료로서의 우수한 물성 때문에 산업에서 계속적으로 넓게 쓰이고 있다. 특히 최근 높은 색 재현율과 고화질로 각광을 받고 있는 능동형 유기발광 다이오드 (AMOLED)를 위한 Thin Film Transistor (TFT)는 신뢰성 및 우수한 특성이 요구되기 때문에 반드시 폴리실리콘 TFT가 적용되어야 한다. 이러한 이유 때문에 아모포스 실리콘을 폴리실리콘으로 결정화 시키는 방법들이 많이 연구 되어져왔다. 이 연구에서는 아모포스 실리콘 박막을 고품질의 폴리실리콘 박막으로 제조하기 위해, 기판에 positive DC 전압을 펄스 형태로 인가함으로써, 기판에 입사되는 전자를 이용한 열처리 방법을 사용하였다. 열처리 온도는 기판에 들어오는 current값을 조절함으로써 제어할 수 있었다. 열처리를 위해 사용 된 수소화 된 아모포스 실리콘은 Low Pressure Chemical Vapor Deposition (LPCVD)장비로 530도에서 증착 되었으며, 이러한 아모포스 실리콘 박막은 공정시간 60 s 이내에 샘플 표면온도가 600도 이상으로 증가함으로써 균일한 폴리실리콘 막으로 제조 되었다.
비정질 실리콘박막의 고상결정화 특성에 대한 비정질 박막의 증착방법, 수소화 정도, 표면결정 활성화 에너지 변화 및 열처리 환경 영향을 X선 회절, EDAX, Raman 분광 분석으로 조사하였다. 저온(58$0^{\circ}C$)열처리 corning 시료에서 기판 barium(Ba), aluminum(AI) 성분의 막내 확산 임계열처리시간 및 확산에 기인 한 불안정 결정화 특성을 관찰하였다. 화학기상증착 석영 수소화 시료에서 hard damage 기계적 활성화 효과로 얻어진 조대결정립 결정화 특성을 X선 회절의 (111) 배향 상대강도 변화로 관찰 할 수 있었으며, 이는 활성화 효과에 의한 고상 결정화 시 핵생성과 성장속도변화로 다결정 실리콘의 전기적물성 향상 가능성을 보여주었다. Soft damage, bare 활성화 처리 수소화막의 결정화는 비정질 상의 혼재, 박막 응력등의 저품위 입계특성 및 미세결정립 성장 특성으로 관찰되었으나, 활성화 전처리에 의한 저온 및 고온(875$^{\circ}C$)단시간(30분) 결정화는 확인 되었다. 스퍼터링 비수소화 막의 결정화는 상변태 상태의 Raman 결정피크로 분석 되었으며, 결정화 거동에 선행막의 스퍼터링 및 비수소화 영향은 활성화효과에 관계없이 불완전 저품위 결정특성으로 확인되었다. AFM 표면형상은 3차원 island 성막특성을 보여주었고 표면거칠기정도는 높은 것으로 관찰되었다.
Journal of the Korean Crystal Growth and Crystal Technology
/
v.12
no.4
/
pp.210-214
/
2002
The crystallization behavior of amorphous silicon (a-Si) film was investigated by using Cu-field aided lateral crystallization (Cu-FALC) process below $450^{\circ}C$. The lateral crystallization was induced from the Cu deposited region outside of pattern toward the Cu-free region inside of the pattern by applying an electric field during heat treatment. As expected, the lateral crystallization toward Cu-free region proceeded from negative toward positive electrode side. The occurrence of Cu-FALC phenomenon was interpreted in terms of dominant diffusing species in the reaction between Cu and Si. Even at the annealing temperature of $350^{\circ}C$, the large dendrite-shaped branches were formed in the crystallized region and the polarity in the lateral crystallization was clearly observed. Consequently, we could successfully crystallize the a-Si at the temperature as low as $350^{\circ}C$ by an electric field of 30 V/cm with fast crystallization velocity of 12 $\mu$m/h.
Proceedings of the Korean Institute of Surface Engineering Conference
/
2009.05a
/
pp.98-98
/
2009
Hydrogenated nano-, microcrystalline silicon 박막(nc-, ${\mu}c-Si:H$)은 박막 트랜지스터 및 실리콘 박막형 태양전지등에 널리 쓰이고 있다. 이러한 결정화 실리콘 박막을 내장형 안테나를 사용하여 고밀도 플라즈마를 발생시킬 수 있는 장치를 통하여 증착 후 열처리 공정이 없는 방법을 사용하여 박막을 제작하였다. 특히, 증착시 기판에 바이어스를 함께 인가하므로 증착된 박막의 결정화에 미치는 영향에 관한 연구를 하였다. 기판에 인가된 바이어스가 60W일 때 가장 높은 결정화율을 보이는 것을 알 수 있었다.
Proceedings of the Korean Vacuum Society Conference
/
2010.02a
/
pp.144-144
/
2010
다결정 실리콘 박막트랜지스터 (poly-Si TFTs)는 벌크실리콘을 이용한 MOSFET소자에 비해 실리콘 박막의 형성이 간단하므로 대면적의 공정이 가능하며 다양한 기판위에 적용이 가능하여 LCD, OLED 등의 디스플레이 기기에 많이 이용되고 있다. 또한 poly-Si TFT는 3차원으로 적층된 소자의 제작이 가능하여 고집적의 한계를 극복할 소자로 주목받고 있다. 최근, DRAM은 캐패시터의 축소화와 구조적 공정이 한계점에 도달했으며 이를 극복하기 위하여 SOI 기판을 사용한 하나의 트랜지스터로 DRAM의 동작을 수행하는 1T-DRAM의 연구가 활발히 진행 중이다. 이러한 1T-DRAM 소자를 대면적과 다층구조의 공정이 가능한 poly-Si TFT를 이용하여 구현하면 초고집적의 메모리 소자를 제작 가능할 것이다. 따라서, 본 연구에서는 다결정 실리콘 박막트랜지스터 (poly-Si TFTs)를 이용한 1T-DRAM의 동작 특성을 연구하였다. 소자의 제작 방법으로는 200 nm의 열산화막이 성장된 p-type 실리콘 기판위에 상부실리콘으로 사용될 비정질 실리콘 박막을 LPCVD 방법으로 증착하였다. 다음으로 248 nm의 파장을 가지는 KrF 레이저를 이용한 eximer laser annealing (ELA) 공정을 통하여 결정화된 상부실리콘층에 TFT 소자를 제작하여 전기적 특성을 평가하였다.
Recently, according to the rapid progress in Flat-panel-display industry, there has been a growing interest in the poly-Si process. Compared with a-Si, poly-Si offers significantly high carrier mobility, so it has many advantages to high response rate in Thin Film Transistors (TFT's). We have investigated a new process for the high temperature Solid Phase Crystallization (SPC) of a-Si films without any damages on glass substrates using thin film heater. because the thin film heater annealing method is a very rapid thermal process, it has very low thermal budget compared to the conventional furnace annealing. therefore it has some characteristics such as selective area crystallization, high temperature annealing using glass substrates. A 500 $\AA$-thick a-Si film was crystallized by the heat transferred from the resistively heated thin film heaters through $SiO_2$ intermediate layer. a 1000 $\AA$-thick $TiSi_2$ thin film confined to have 15 $\textrm{mm}^{-1}$ length and various line width from 200 to 400 $\mu\textrm{m}$ was used as the thin film heater. By this method, we successfully crystallized 500 $\AA$-thick a-Si thin films at a high temperature estimated above $850^{\circ}C$ in a few seconds without any thermal deformation of g1ass substrates. These surprising results were due to the very small thermal budget of the thin film heaters and rapid thermal behavior such as fast heating and cooling. Moreover, we investigated the time dependency of the SPC of a-Si films by observing the crystallization phenomena at every 20 seconds during annealing process. We suggests the individual managements of nucleation and grain growth steps of poly-Si in SPC of a-Si with the precise control of annealing temperature. In conclusion, we show the SPC of a-Si by the thin film heaters and many advantages of the thin film heater annealing over other processes
Proceedings of the Materials Research Society of Korea Conference
/
2003.11a
/
pp.73-73
/
2003
최근 LCD(liquid crystal display)분야에서 고해상도와 빠른 응답속도를 가지는 다결정 실리콘 박막트랜지스터에 대한 연구를 하고 있다. 그러나, poly-Si은 poly-Sil-xGex에 비해 intrinsic carrier mobility가 낮고 고온의 결정화 공정을 필요로 한다. 따라서, Poly-Si을 대체할 재료로 poly-SiGe에 대한 연구가 활발히 진행되고 있다. 본 연구에서는 전계에 의해 결정화가 가속되고 한쪽 방향으로 결정화를 제어하여 채널내 전자나 정공의 이동도를 향상시 킬 수 있는 새로운 결정화 방법인 전계 유도 방향성 결정화법을 이용하여 Ge 함량에 따른 a-Sil-xGex(0$\leq$x$\leq$0.5)의 결정화 특성을 연구하였다. 대기압 화학 기상 증착법으로 5000$\AA$의 산화막(SiO$_2$)이 증착된 유리 기판상에 플라즈마 화학 기상 증착법을 이용하여 800$\AA$의 비정질 실리콘을 증착한 후 RF magnetron sputtering법을 이용하여 Ge 함량에 따른 Sil-xGex 박막을 1000$\AA$ 증착하였다. Photolithograph방법을 이용하여 금속이 선택적으로 증착될 수 있는 특정 Pattern을 가진 mask를 형성한 후 금속을 DC magnetron sputtering법을 이용하여 상온에서 50$\AA$.을 증착하였다. 이후 시편에 전계를 인가하기 위해 시편의 양단에 전극을 형성한 후 DC Power Supply를 통해 전압을 제어하는 방식으로 전계를 인가하였다. 결정화 속도는 광학현미경을 이용하여 분석하였으며 결정화된 영역의 결정화 정도는 micro-Raman spectroscopy로 분석하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.