• Proceedings of the Korean Vacuum Society Conference
• /
• 1996.02a
• /
• pp.85-86
• /
• 1996

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.02a
• /
• pp.149-149
• /
• 1999

• Proceedings of the Korean Vacuum Society Conference
• /
• 2007.08a
• /
• pp.87-87
• /
• 2007

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.151-154
• /
• 2002

AP/RPCVD를 이용하여 $650^{\circ}C$의 저온에서 실리콘-게르마늄의 선택적 단결정 성장 (Selective Epitaxy Growth: SEG) 을 수행하였다. 본 실험에서는 $SiH_4$, $GeH_4$ 그리고 HCl 가스를 사용하여 잠입시간 동안 실리콘-게르마늄막을 성장시키고 연속해서 HCI 가스만을 주입하여 산화막 위에 형성되어진 작은 결정입자들을 식각하는 공정을 반복적으로 수행하였다. HCl 의 식각에 의해 한 주기의 잠입기 후에도 다시 잠입기가 존재함을 확인하였고, 이 성장법을 통하여 한 주기의 잠업시간 동안 증착할 수 있는 두께 이상으로 실리콘-게르마늄막의 선택적 성장이 가능하였다. 이는 저온 선택적 실리콘-게르마늄 성장 시 RPCVD에서 보이는 낮은 선택성과 $SiH_4$의 짧은 장입시간으로 인해 원하는 두께까지 확보하기 힘든 단점을 극복한 것이다. 선택성을 향상시키기 위해 실리콘-게르마늄 증착중 주입된 HCI의 유량에 따라 잠입시간과 증착속도에 영향을 주었으며, 연속공정을 위한 식각공정은 20sccm의 HCI을 20초간 주입하여 선택성을 유지하였다. 또한 보론 불순물의 첨가가 선택적으로 성장되는 박막의 결정성에 미치는 영향도 분석되었다.

• Journal of the Korean Vacuum Society
• /
• v.13 no.3
• /
• pp.120-126
• /
• 2004

A damage-reduced trench was investigated in view of the defect distribution along trench sidewall and bottom using high resolution transmission electron microscopy, which was formed by HBr plasma and additive gases in magnetically enhanced reactive ion etching system. Adding $O_2$ and other additive gases into HBr plasma makes it possible to eliminate sidewall undercut and lower surface roughness by forming the passivation layer of lateral etching. To reduce the RIE induced damage and obtain the fine shape trench corner rounding, we investigated the hydrogen annealing effect after trench formation. Silicon atomic migration on trench surfaces using high temperature hydrogen annealing was observed with atomic scale view. Migrated atoms on crystal surfaces formed specific crystal planes such as (111), (113) low index planes, instead of fully rounded comers to reduce the overall surface energy. We could observe the buildup of migrated atoms against the oxide mask, which originated from the surface migration of silicon atoms. Using this hydrogen annealing, more uniform thermal oxide could be grown on trench surfaces, suitable for the improvement of oxide breakdown.

• Journal of IKEEE
• /
• v.19 no.1
• /
• pp.41-44
• /
• 2015

Silicon trench process for bulk fin field effect transistor (finFET) is suggested without using chemical mechanical polishing (CMP) that cause contamination problems with chemical stuff. This process uses thickness difference of photo resistor spin coating and silicon nitride sacrificial layer. Planarization of silicon oxide and silicon trench formation can be performed with etching processes. In this work 50 nm silicon trench is fabricated with AZ 1512 photo resistor and process results are introduced.

• Electrical & Electronic Materials
• /
• v.4 no.1
• /
• pp.38-44
• /
• 1991

본 연구는 전기로에 의한 열 산화법에 의해 SiO$_{2}$(88[.angs.])와 ONO(89[.angs.])를 성장시켜 MIS capacitor를 제작한 후, 초 박막 유전체/실리콘 계면에서 전자파 간섭 효과를 실험적으로 비교 검토한 것이다. EWIE현상의 결과로서 첫째. 저 전계영역에 비해 고 전계영역에서 우세하며 둘째. SiO$_{2}$에 비해 ONO가 약하게 나타난다. 그러므로 ONO가 SiO$_{2}$보다 열 전송자 효과에 대한 저항성이 우수함을 알 수 있고 ULSI급의 게이트 절연막으로서의 실용가능성을 확인하였다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.2
• /
• pp.105-111
• /
• 2010

Two types of electro-osmotic pumps were prepared: with anodized and DRIE porous silicon. The pump performance was characterized for both types in terms of flow rate and flow rate per current using organic solvents. Both types of electro-osmotic pumps showed a better performance compared to porous glass electro-osmotic pumps. The DRIE porous silicon electro-osmotic pump especially demonstrated an excellent flow rate and flow rate per current performance. The DRIE porous silicon electro-osmotic pump is expected to help in the development of electro-osmotic pumps and micropumps in general due to the recently widespread availability of DRIE processes.

• Journal of the Korean Vacuum Society
• /
• v.7 no.2
• /
• pp.150-154
• /
• 1998

Photoluminescence(PL), XRD, TEM results $5\times1016/\textrm{cm}^2, 1\times10^{17}/\textrm{cm}^2, 3\times10^{17}/\textrm{cm}^2$ Si-implanted $SiO_2$ films on crystalline silicon are reported. At low dose implantation and low annealing temperature, visible PL are observed. The PL spectrum has 7400$\AA$ and 8360$\AA$ peaks. As annealing time increased, the PL intensity are increased and peak positions are changed. The PL spectrum are not observed at high dose implantation and high annealing temperature. For the samples of low dose and high annealing temperature, visible PL are observed at short annealing time (30 minutes) and disappear for more than 1 hour annealing. From XRD and TEM results, silicon cluster are related to nonradiative defects. It is concluded that the origin of visible PL in Si implanted SiO2 films are not nanocrystal but two kinds of radiative defects. The Si-O-O bonding related defects (O rich defects) and Si-Si-O bonding related defects (Si rich defects) are related to the PL spectrum and depend on concentraion of Si implantation, annealing temperature and time.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2003.02a
• /
• pp.88-88
• /
• 2003