• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2011.04a
• /
• pp.295-300
• /
• 2011

국내 건축물 외장재의 화재위험성 판단을 위한 기준 설정 및 건축물 외장재 수직확산 방지를 위하여 국내 외 실규모 화재실험을 비교 분석하였다. 현재 미국, 영국 등의 화재안전선진국들에서는 NFPA 285, BS 8414-1 등의 실대형 화재 실험을 통하여 외장재의 화재위험성을 판단하고 있다. 이에 본 연구에서는 국내 외 건축물 외장재의 수직화재확산 성능 평가 방법들의 비교 분석을 통하여 국내 실정에 맞는 실대형의 화재실험 방법을 결정하고자 하였다. 본 결과를 통해 건축물의 단위 공간에서 화재가 발생하여 화재의 성장이 플래시오버에 도달한 후 창문 등의 개구부를 통하여 화염이 출화되었을 때 이러한 화염에 의한 건축물 외장재의 수직화재 확산 성능 평가하는 건축물 외장재 수직확산 실대형 화재실험 장비를 개발하고자 하였다.

• Journal of the Korean GEO-environmental Society
• /
• v.20 no.12
• /
• pp.15-26
• /
• 2019

This study was conducted to characterize shearing strength of geotextile bag, connecting materials and gabion. A largescale shaking take tests were conducted to assess kinetic characteristics of gabion-geotextile bag retaining wall. Based on the results of large-scale shaking table test, dynamic characteristics of gabion-geotextile bag retaining wall structure against acceleration, displacement, and earth pressure were also analyzed. The increments of dynamic active earth pressure were determined to be (0.376-0.377)H at 1:0.3 slope and $(0.154-0.44)g_n$ earthquake acceleration, and (0.389-0.393)H at 1:1 slope, suggesting that the increments tend to rise as the slope decreases.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.7
• /
• pp.5-14
• /
• 2019

In this study, a prototype abutment was constructed to establish a safety assessment technique of pier and a series of non-destructive tests using impact load. The surcharge load was loaded from 0 tonf to 2.5 tonf on the prototype abutment, and maximum surcharge load was up to 25 tonf. To analyze the behavior of the piers according to the direction of impact, a total of three types of analysis were performed: the direction of the pier, the direction perpendicular to the pier, and the outer direction of the pier. The height of the impact was also tested at each top and bottom. The measuring instrument used an accelerometer to measure the acceleration response when impacted. Based on the series of experimental results, specific values were calculated according to the direction of an impact and the surcharge load using the Fast Fourier Transform (FFT). In addition, the phase difference was used to analyze the pier from the primary 1st mode to the 4th mode.

• Journal of the Korean Geosynthetics Society
• /
• v.15 no.2
• /
• pp.35-44
• /
• 2016

PET aggregates were produced by mixing heated PET flakes with frictional soils. Using these artificially-made PET aggregates, horizontal drain tests in the laboratory, pilot scale model tests were conducted for the evaluation of the drainage characteristics of PET aggregates. Laboratory horizontal drain tests were conducted under twenty different conditions varying mixing ratios and surcharged pressures. Moreover, by utilizing the aggregates with a mixing ratio producing the lowest variation in terms of permeability against applied load, large scale tests were performed. Reliability of the test results was evaluated from comparison with the results of the laboratory horizontal drain test.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.25-28
• /
• 2008

Currently, the prefabricated bridge having the effects to reduce the term of works and the cost of construction is often studied and countries such as America have already developed members, the parts of it, and the technique of construction. In addition, they have supplied them to the fields. The study of prefabricated method of steel composite bridge, which has the precast deck - plate and main girder fixed by high tension bolt and can resist horizontal sheer, is being progressed. However, it is difficult to understand the characteristics of the prefabricated bridge's behavior when the superstructure of the prefabricated method is analyzed by applying to the analysis model of existing bridges. Therefore, this study has the purpose of understanding real structural behavior of prefabricated bridge through comparison and analysis between the structural analysis model reflecting the characteristics of the real prefabricated bridge's superstructure and real size experiment.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1997.10a
• /
• pp.325-332
• /
• 1997

• Journal of Korean Society of Steel Construction
• /
• v.13 no.6
• /
• pp.715-723
• /
• 2001

This paper represents the behavior of CFT column to H-beam full-scale connection with external T-stiffener. 6 specimens whose T-stiffeners which are compounded of vertical element and horizontal element were made under the parameter of the strength ratio of each elements(vertical element and horizontal element in T-stiffener) to the beam full plastic moment. The analysis-parameters demonstrated in the base of the data that we get in experiment are strength stiffness, and plastic rotational capacity. All of specimen showed stable hysteretic behavior, and the horizontal element is more critical than vertical element in strength and stiffness. The mean beam plastic rotation of all specimen except the TS-2 specimen is 2.97% rad.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.236-236
• /
• 2018

한국농어촌공사 농어촌연구원에 구축되고 있는 대형 수리모형 실험시설은 수공구조물에 대한 수리모형실험 수행, 설계기준 제 개정, 호안 검인증제도 지원 등 국가의 정책지원과 개방 공유를 통한 국내 건설기업의 하천분야 신기술 개발 및 국가 경쟁력 확보, 하천 관련 원천기술 확보 등 다양한 목적을 가지고 진행되고 있는 대규모 분산공유형 실험시설에 해당한다. 본 사업의 일환으로 현재 구축 진행되고 있는 7종의 실험수로는 장기하상변동, 토석류, 실규모 호안블록, 감세공 수리특성, 신형어도개발 등 다양한 수리특성에 대한 계측 및 분석이 가능한 대형 실험시설에 해당한다. 7종의 실험수로는 PIV시스템의 연계 계측이 가능한 1) 고정식개수로, 2) PIV실험수로와 1/5의 역경사 재현이 가능한 3) 가변식경사수로, 호안블록 및 사석의 소류력 측정이 가능한 4) 고정식급경사수로, 토석류흐름 측정이 가능한 5) 가변식하도실험수로, 장기하상변동 분석을 위한 6) 대형유사순환수로, 부유사의 침 퇴적 양상 재현을 위한 7) 소형유사순환수로로 구성되어진다. 7종의 실험수로는 '18년 2월에 착공하여 현재 실시설계도서를 검토 중에 있으며, 18년 9월에 준공될 예정이다.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2006.03a
• /
• pp.73-78
• /
• 2006

• Journal of Bio-Environment Control
• /
• v.26 no.4
• /
• pp.402-410
• /
• 2017

The effect of the steel pipe member joint on the design performance of a plastic multi-span greenhouse was analysed through the comparing full-scale experiment and numerical analysis. The design performance of the greenhouse is generally evaluated through numerical analysis, but it is rare to consider the characteristics of the connections or joints of the members. In this study, the effect of the column-gutter beam-rafter-wind break wall joint on the design performance of the whole structure of a plastic multi-span greenhouse was analysed. The numerical results with assuming that the member joint are rigid condition were compared with the full-scale load test results using member joints used in the field. The stiffness of the entire structure was compared using the load-displacement relationship and the change of the load sharing ratio that the main members such as column, rafters, and wind break wall was analysed. The results of the load test were about 40% larger than the numerical result and the member stress was more than twice as large as those of the loaded columns. In order to increase the reliability of the design performance of the greenhouse, it is necessary to develop a numerical analysis model which can consider the characteristics of various joints.