• The Journal of the Acoustical Society of Korea
• /
• v.19 no.2
• /
• pp.73-82
• /
• 2000

This paper presents a significant improvement achieved in the acoustic characteristics of a conference room of I-company originally designed and built without consideration for room acoustic characteristics. The reverberation time of the room was excessive, which resulted in poor 'Definition' for speech. Thus the improvement of room acoustic characteristics was required. In this study, experiments and simulations using the principles of geometrical acoustics were executed to improve the acoustic characteristics in the room. By performing a series of simulation, it has become possible to predict acoustic parameters for an improvement plan. And the improvement plan of room acoustic characteristics was established. And for the verification of the simulation results, the experimental data were compared and evaluated against those from the simulation. Additionally, the proposed method in this paper demonstrated its effectiveness by successfully improving the room acoustic characteristics resulted from repair construction.

• The Journal of the Acoustical Society of Korea
• /
• v.9 no.6
• /
• pp.29-37
• /
• 1990

건축물이 갖게 될 음향학적 특성을 미리 예측함으로써 그 건축물의 음향학적 특성을 미리 예측 함으로써 그 건축물의 음향학적 요구에 맞는 설계를 수행할 수 있도록 하기 위해 computer simulation 방법을 개발하였다. 본 연구에서 사용된 simulation 방법은 영상음원법을 기초로 하였으며, simulation 에 의한 임펄스 응답이 유한한 시간 내로 제한되어 발생되어 오차를 줄이기 위한 방법이 제시되었다. 개발된 simulatio 방법으로 실내에서의 임펄스 응답, 잔향 곡선, early/rate energy ratio 등을 예측하고 실험 결과와 비교 하였으며, 실용적인 응용 가능성도 검토하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.11 no.6
• /
• pp.61-64
• /
• 1992

• The Journal of the Acoustical Society of Korea
• /
• v.8 no.5
• /
• pp.59-69
• /
• 1989

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.5
• /
• pp.63-67
• /
• 1999

Recently, a method of measuring impulse response is widely used for a room acoustic evaluation instead of measuring reverberation time by white noise excitation. Comparing with the traditional reverberation time measurement, this method has many advantages such as good repeatability and the ability to extract various room acoustic parameters at one measurement. In this study, the author developed a measuring system that can extract mono-aural room acoustic parameters from an impulse response measured with MLS (Maximum Length Sequence) signal excitation. These room acoustic parameters include reverberation times(EDT, RT), speech intelligibilities(C50, C80, D, U50, U80, AI) and sound strength(G). This paper introduces the configuration of the developed measuring system, test results and discussions for the measurements at several rooms.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.2
• /
• pp.139-144
• /
• 2019

Various room acoustic parameters and their optimal values were proposed and verified as proper interpretations to the listeners' preference of concert hall sounds. However the listening environment has been changed since they were developed, and the listeners' preference may not be the same among countries of different cultural backgrounds. Actual listeners' preference should be applied to the design of a new concert hall. A survey on the listening preference was carried out for 22 music experts. A room acoustical design process was proposed which made the acoustical environment of a concert hall as close to the listeners' preferences.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.1
• /
• pp.1-11
• /
• 2008

To overcome the mid frequency limitation of geometrical acoustic techniques, the phased geometrical method was suggested by introducing the phase information into the sound propagation from the source. By virtue of phase information, the phased tracing method has a definite benefit in taking the interference phenomenon at mid frequencies into account. Still, this analysis technique has suffered from difficulties in dealing with low frequency phenomena, so called, wave nature of sound. At low frequencies, diffraction at corners, edges, and obstacles can cause errors in simulating the transfer function and the impulse response. Due to the use of real valued absorption coefficient, simulated results have shown a discrepancy with measured data. Thus, incorrect phase of the reflection characteristic of a wall should be corrected. In this work, the uniform theory of diffraction was integrated into the phased beam tracing method (PBTM) and the result was compared to the ordinary PBTM. By changing the phase of the reflection coefficient, effects of phase information were investigated. Incorporating such error compensation methods, the acoustic prediction by PBTM can be further extended to low frequency range with improved accuracy in the room acoustic field.

• The Journal of the Acoustical Society of Korea
• /
• v.12 no.6
• /
• pp.85-92
• /
• 1993

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.7
• /
• pp.573-578
• /
• 2003

Recently, speaker localizing estimation technique has been rising in teleconference systems. In this paper, it was described to be able to enhance the speech quality through microphone array, and received the only signal of speaker. Unfortunately, as it using estimated the signal in advance, it is not matched in a real acoustic environment so it has poor performance. In this paper is proposed for Adaptive Matched Filter Microphone Array that estimated acoustic room environment from the received the signal and study of the efficiency through simulations.

• The Journal of the Acoustical Society of Korea
• /
• v.13 no.1
• /
• pp.93-98
• /
• 1994

This study aims to find the theoretical consideration of the basic simularity rule between scale model experiment and real building as a results ; 1. In the case of room acoustics, $f_m=n\cdot{f_r}\;T_m=T_r/n\; \alpha_m(f_m)=\alpha_r(f_r)$ 2. That of sound Insulation : $TL_m(f_m)=TL_r(f_r)$