• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2C
• /
• pp.255-261
• /
• 2004

The problem of geolocation using multiple satellites is to determine the position of a transmitter located on the Earth by processing received signals. The specific problem addressed in this paper is that of estimating the position of a stationary transmitter located on or above the Earth's surface from measured time difference of arrivals (TDOA) by a geostationary orbiting (GSO) satellite and a low earth orbiting (LEO) satellite. The proposed geolocation method is based on the total least squares (TLS) algorithm. Under erroneous positions of the satellites together with noisy TDOA measurements, the TLS algorithm provides a better solution. By running Monte-Carlo simulations, the proposed method is compared with the ordinary least squares (LS) approach.

• Journal of the Institute of Convergence Signal Processing
• /
• v.13 no.3
• /
• pp.130-135
• /
• 2012

In this paper, we propose a technique to detect the size and location of the small target in images by using Gaussian kernel repeatedly. In order to detect the size and location of the small target, we find the local maximum value by applying the facet model and then use the $3{\times}3$ Gaussian kernel repeatedly. we determine the size of small target by comparing the local maximum value $D_2$ according to the number of iteration. To reduce the computational complexity, we use the Gaussian pyramid when using the kernel repeatedly. Through the experiment, we verified that the size and location of the small target is detected by the number of iterations and results show improvements from conventional methods.

• Journal of the Korea Convergence Society
• /
• v.2 no.2
• /
• pp.7-12
• /
• 2011

In this study, we investigate on location optimization algorithm of radio-navigation transmitter. The DOP for an each receiver is decided by the location of a transmitter. We provide various results that give an optimum DOP according to propagation characteristics. We use the DTED(Digital Terrain Elevation Data) to improve the accuracy.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.2
• /
• pp.367-374
• /
• 2022

A sampling set selection algorithm is proposed to reconstruct original graph signals from the sampled signals generated on the nodes in the sampling set. Instead of directly minimizing the reconstruction error, we focus on minimizing the upper bound on the reconstruction error to reduce the algorithm complexity. The metric is manipulated by using QR factorization to produce the upper triangular matrix and the analytic result is presented to enable a greedy selection of the next nodes at iterations by using the diagonal entries of the upper triangular matrix, leading to an efficient sampling process with reduced complexity. We run experiments for various graphs to demonstrate a competitive reconstruction performance of the proposed algorithm while offering the execution time about 3.5 times faster than one of the previous selection methods.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.11 no.1
• /
• pp.73-84
• /
• 1986

A statistical method is proposed which estimates an edge that is one of the basic features in image understanding. The conventional edge detection techniques are performed well for a deterministic singnal, but are not satisfactory for a statistical signal. In this paper, we use the likelihood function which takes account of the statistical property of a signal, and derive the decision function from it. We propose the maximum likelihood edge detection technique which estimates an edge point which maximizes the decision function mentioned above. We apply this technique to statistecal signals which are generated by using the random number generator. Simnulations show that the statistical edge detection technique gives satisfactory results. This technique is extended to the two-dimensional image and edges are found with a good accuracy.

• Journal of Broadcast Engineering
• /
• v.1 no.2
• /
• pp.85-95
• /
• 1996

The purpose of this paper Is to propose a dubbed signal time-synchroniztion technique based on the SOLA(Synchronized Over-Lap and Add) method which has been widely used to modify the time scale of speech signal. In broadcasting audio recording environments, the high degree of background noise requires dubbing process. Since the time difference between the original and the dubbed signal ranges about 200mili seconds, process is required to make the dubbed signal synchronize to the corresponding image. The proposed method finds he starting point of the dubbing signal using the short-time energy of the two signals. Thereafter, LPC cepstrum analysis and DTW(Dynamic Time Warping) process are applied to synchronize phoneme positions of the two signals. After determining the matched point by the minimum mean square error between orignal and dubbed LPC cepstrums, the SOLA method is applied to the dubbed signal, to maintain the consistency of the corresponding phase. Effectiveness of proposed method is verified by comparing the waveforms and the spectrograms of the original and the time synchronized dubbing signal.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.4
• /
• pp.73-85
• /
• 2010

In dense electronic warfare signal environments, the conventional radar identification methods based on the basic parameters such as frequency, pulse width, and pulse repetition interval are confronted by the problem of identification ambiguity. To overcome this critical problem, a new approach introducing scan pattern of radars has been presented. Researches on new identification methods, however, suffer from a practical problem that it is not easy to secure the many radar signals including various scan pattern information and operation parameters. This paper presents a modeling method of radar signals with which we can generate radar signals including various scan pattern types according to the parameters determining the variation pattern of received signal strength. In addition, with the radar signals generated by the proposed model we analyze their characteristics according to the location of an electronic warfare support (ES) system.

• Journal of Advanced Navigation Technology
• /
• v.15 no.1
• /
• pp.32-38
• /
• 2011

In this paper, code and carrier tracking error which resulted from spoofing signal was analyzed by simulation. For a start, the types of spoofing signals and methods were classified. For the simulation, search spoofing method is assumed because a perfect position and velocity are not generally informed to spoofing device. In most cases, the tracking error is increased but a complete deception does not happen because of the inherent anti-spoofing characteristics of the GPS signal.

• 한국지형공간정보학회:학술대회논문집
• /
• 2003.09a
• /
• pp.157-162
• /
• 2003

실시간 동적 GPS 측위를 이용한 해저수심측량은 GPS 수신기가 이동중인 상태에서 신호단절 없이 연속적인 수심측정이 가능하며 등수심도와 등고선 제작에 정확한 위치를 결정할 수 있고, 음향측심기는 발사파와 수신파의 도달시간을 측정하여 수심을 관측할 수 있기 때문에 실시간으로 정확한 3차원 측량이 가능하다. 본 논문에서는 해안지역에 대한 지형 분석을 하기 위하여 기준점에 대한 정지관측을 실시하여 좌표변환계수를 산출하고, 이로부터 실시간 동적 GPS 측량과 음향측심기를 이용하여 해운대 해수욕장과 해안을 관측하였다. 1:1,200 축척의 수치지도에서 추출한 수치표고모델에서의 체적은 $97953.9m^3$이며, 실시간 동적 GPS와 음향측심기를 이용하여 추출한 수치표고모델에서의 체적은 $95994.9m^3$로 나타났다. 이는 수치지도에서의 체적과 측량결과의 체적이 단지 2.0%정도로 나타나 실시간 동적 GPS와 음향측심기의 결합에 의한 해저수심측량이 매우 성공적임을 알 수 있었다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2006.11a
• /
• pp.41-43
• /
• 2006

FTV (Free Viewpoint TV, 자유시점 TV)는 사용자들이 원하는 시점을 자유자재로 결정할 수 있는 차세대 TV이다. 또한 영상 획득 시 카메라가 위치하지 않은 새로운 시점을 만들 수 있다. 따라서 FTV는 개인, 산업, 사회, 의학. 사회 분야의 유망한 응용이 될 수 있다. Ray-space에 의한 데이터 표현은 FTV를 위한 데이터 포맷의 한 후보가 될 수 있으며, 실시간으로 임의시점의 영상을 구성하는 데에 있어서 우수한 장점을 가지고 있다. Ray-space에서 사용하는 기법은 컴퓨터 그래픽스가 아니라 순수한 신호 처리 방식이다. 스케일러블 구조, 계층적 구조가 Ray-space로 표현 가능하므로, Ray-space는 비디오 처리의 새로운 플랫폼을 구성할 수 있고 비디오의 개념을 확장할 수 있다. 본 논문에서는 Ray-space 데이터를 이용하여 임의 시점 영상을 생성하기 위해 기존의 보간(interpolation) 기법을 보완한 새로운 기법을 제안함으로써, 보다 자연스러운 영상을 얻고자 하는데 목적이 있다.