• Proceedings of the Korea Multimedia Society Conference
• /
• 2004.05a
• /
• pp.379-382
• /
• 2004

적응신호처리 분야에서 LMS알고리듬은 수식이 간단하고, 적은 계산량으로 인해 널리 사용되고 있지만, 시간영역의 적응알고리즘은 입력신호의 고유치 분포폭이 넓게 분포한 때는 수렴속도가 느려지는 단점이 있다. 이런 문제점을 개선하기 위하여 본 논문에서는 시간영역의 적응 알고리즘을 변환영역에서 수행하고, 변환영역에서 수렴성능 향상과 계산량을 줄이기 위하여 웨이블렛기반의 고속 적응 알고리즘을 제안하였다. 제안한 알고리즘을 OFDM 적응등화기에 적용하여, 기존의 OFDM 등화기 알고리즘과 비교하여 제안한 적응알고리즘의 성능이 우수함을 보인다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.2
• /
• pp.152-162
• /
• 2001

Laser-generated ultrasonic technique which is one of the reliable nondestructive evaluation techniques has been applied to evaluate the integrity of structures by analyzing the characteristics of signal obtained from surface crack. Therefore, the signal analysis of the laser-generated ultrasonics is absolutely necessary for the accurate and quantitative estimation of the surface defects. In this study, one-sided measurement by laser-generated ultrasonic has been applied to evaluate the depth of the surface-breaking crack in the materials. However, since the ultrasonic waveform excited by pulse laser is very difficult to distinguish the defect signals, it is necessary to consider the signal analyses of the transient waveform. Wavelet Transform(WT) is a powerful tool for processing transient signals with temporally varying spectra that helps to resolve high and low frequency transient components effectively. In this paper, the analyses of the surface-breaking crack of the ultrasonic signal excited by pulse laser are presented by employing the WT analyses.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.5
• /
• pp.59-66
• /
• 2010

Korea have experienced a very rapid increase in police-reported collisions between bicycle and motor vehicles over the past decade. Even though cycling accidents are increasing, efforts to make urban areas more accomodating to cyclists are seldom formed. Clearance intervals(including both the yellow change and all-red clearance intervals) at signalized intersections that are of inadequate lengths for bicycles may cause accidents. Data on bicycling speed, acceleration and deceleration were tested and analyzed on the flat. Using the results of the analysis and based on the AASHTO's equation of the bicycle clearance interval, a methodology is got for calculation safe clearance intervals for bicycle riders. The clearance interval call for bicycles will be larger or same than for vehicles because of the speed, acceleration and deceleration difference. Adequate bicycle speed, acceleration and deceleration for korean bicycle users is presented in this paper. It is hoped that traffic engineers to provide safe intersection clearance time for bicycles use the results of this paper.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.6
• /
• pp.511-520
• /
• 2000

Ultrasonic pulse echo method comes to be difficult to apply to the multi-layered structure with very thin layer, because the echoes from the top and the bottom of the layer are superimposed. We can easily meet this problem when the silicon chip layer in the semiconductor is inspected by a SAM equipment using fairly low frequency lower than 20MHz by which severe attenuation in the epoxy mold compound of packaging material can be overcome. Conventionally, deconvolution technique has been used for the decomposition of superimposed UT signals, however it has disabilities when the waveform of the transmitted signal is distorted according to the propagation. In this paper, the wavelet transform based deconvolution(WTBD) technique is proposed as a new signal processing method that can decompose the superimposed echo signals with superior performances compared to the conventional deconvolution technique. WTBD method uses the wavelet transform in the pre-stage of deconvolution to extract out the common waveform from the transmitted and received signal with distortion. Performances of the proposed method we shown by through computer simulations using model signal with noise and we demonstrated by through experiments for the fabricated semiconductor sample with partial delamination at the top of silicon chip layer.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.11
• /
• pp.933-940
• /
• 2021

The space-borne SAR(Synthetic Aperture Radar) system radiates the microwave signal and receives the backscattered signal. The received signal is converted to digital at the Digital Receiver, which is implemented at the end of the SAR sensor receiving chain. The converted signal is formated after signal processing such as filtering and data compression. Two quantization are conducted in the Digital Receiver. One quantization is an analog to digital conversion at ADC(Analog-Digital Converter). Another quantization is the BAQ(Block Adaptive Quantization) for data compression. The quantization process is a conversion from a continuous or higher bit precision to a discrete or lower bit precision. As a result, a quantization noise is inevitably occurred. In this paper, the impact of two quantization processes are analyzed in a view of SNR degradation.

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.4
• /
• pp.115-120
• /
• 2002

This paper presents the implementation of IS-95 CDMA signal processor, baseband and Intermediate Frequency(IF) digital converter using Field Programmable Gate Array(FPGA) and ADC/DAC and frequency up/down converter IS-95 CDMA channel processor is generated the pilot channel signal with short PN code and Walsh-code generator. The digital If is composed of FPGA. digital transmit/receive signal processor and high speed analog-to-digital converter(ADC) and digital-to-analog converter(DAC). The frequency up/down converter consisted of filter, mixer, digital attenuator and PLL is analog conversion between intermediate frequency(IF) and baseband. This implemented system can be deployed in the IS-95 CDMA base station device etc.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.5
• /
• pp.1078-1084
• /
• 2010

This paper presents a speech enhancement system which restores the amplitude components and phase components by discrete Fourier transform (DFT), using neural network training by back-propagation algorithm. First, a neural network is trained using DFT amplitude components and phase components of noisy speech signal, then the proposed system enhances speech signals that are degraded by white noise using a neural network. Experimental results demonstrate that speech signals degraded by white noise are enhanced by the proposed system using the neural network, whose inputs are DFT amplitude components and phase components. Based on measuring spectral distortion measurement, experiments confirm that the proposed system is effective for white noise.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.10a
• /
• pp.76-78
• /
• 1993

간접적인 방법으로 가공중(In process)공구상태를 감시하기 위해, 센서신호를 분석하는 방법으로 시간영역 (Time Domain) 해석과 주파수 영역(Frequency Domain)해석이 주로 이용되어 왔다. 시간영역해석의 경우 RMS,PEak Value, 평균/분산을 이용한 정적분석과 AR 모델, ARMA 모델, Kalman Filter등 동적 시계열 모델이 연구되어 왔다. 주파수영역해석의 경우 푸리에 변환 (Fourier Transform)에 의한 신호해석 기술이 주로 이용되고 있다. 그러나 푸리에 변환된 결과에는 시간정보가 포함되어 있지 않고, 국부적인 변환결과가 전체를 대표하는 성질을 가지고 있다. 이에 비해 웨이브렛(Wavelet) 변환은 고주파성분에 대해서는 시간분해능이 높고, 저주파 성분에 대해서는 주파수분해능이 높은 다중해상도 해석기술로서 국소적인 변동점을 민검하게 검지하는 것이 가능하다. 본연구에서는 엔드밀 가공중 발생하는 공구의 파손을 검출하기 위해, 전류센서로 부터 얻은 이송축 부하 전류의 변화에 웨이브렛 변환을 통해 공구의 파손을 검출하는 방법에 대한 연구결과를 소개한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.10a
• /
• pp.522-527
• /
• 2000

본 논문은 그레이이미지를 컬러이미지로 변환하는 의사칼라이미지 향상에 관한 연구이다. 적용기법은 그레이이미지의 시간영역신호를 주파수영역으로 변환하고 LPF, BPF, HPF 2차원필터를 통과시켜 시간영역으로 역 변환한 후 각각에 대해 히스토그램 평활화하여 RGB 신호를 구하는 과정에서 의사 칼라를 얻는다. 실험 결과 필터주파수가 증가함에 따라 PSNR도 증가하고 낮게 설정하면 경계부분의 화질이 좋아진다. 2차원 주파수필터의 사용은 칼라 변환 시 강조하고자 하는 부분을 보다 자유롭게 변환할 수 있고 다양한 컬러 이미지로 향상되어 영상분석에 효과가 있다. 의사칼라의 변환에 의한 식별 인식능력은 9dB 정도 향상된다.

• ETRI Journal
• /
• v.6 no.2
• /
• pp.39-44
• /
• 1984

애널로그 신호인 음성신호를 디지틀값으로 변환하여 컴퓨터의 mass storage device에 저장하거나 또는 저장된 디지틀 음성 데이터를 애널로그 신호로 재생하는 기술은 디지틀 음성신호처리의 가장 중요한 토대를 마련해 준다. 본고에서는 음성변경시스팀과 같은 저장형 통신시스팀의 구현에 있어서 반드시 구비되어야 할 기술인 음성신호의 실시간 디스크 저장문제를 NOVA 4/X 미니컴퓨터에서 해결한 것을 간단히 기술하였다.