• Journal of Advanced Navigation Technology
• /
• v.22 no.5
• /
• pp.420-428
• /
• 2018

In this paper, represented uninterruptible power supply (UPS) equipment maintaining constant output voltage, the proposes a photovoltaic system constructed with a step up boosting chopper and single phase pulse width modulation (PWM) voltage source inverter. as power source disconnection, voltage variation and output current variation with load variation. This system is driven by being synchronized voltage fed inverter and AC source, and in the steady state of power source charge battery connected to DC side with solar cell using a Photovoltaic that it was so called constant voltage charge. It can be results of saving electric power, and through a normal operation of energy storage system (ESS), the system operated the LED a calling on signal changes at the airport in an efficient manner. In addition, better output waveform was generated because of PWM method, and it was proved to test by experiment maintained constant output voltage regardless of AC source disconnection, load variation, and voltage variation of AC power source.

• Korean Journal of Optics and Photonics
• /
• v.1 no.2
• /
• pp.198-203
• /
• 1990

In this paper, a system has been proposed for the measurement of the spectral characteristic of semiconductor light sources driven by very short pulse currents. This system has been constituted a monochrometer of 600 groovedmm grating and of 275 mm focal length, X-Y recorder, scanning motor which enables the system to get the analog data, and amplifier coupled with peak detector. Especially, peak detector was used to convert the short pulse signal to continuous one. In order to verify the resolution with slit width, several slits were made by the hands. By using this system, the spectra of commercial LEDs, AlGaAdGaAs LD, and InGaAsPIInP BH-LD which were driven with pulse current (duty cy$e = 0.01) were measured. From these measurements, it has been shown that the proposed system has about 1 A1$\AA$ resolution and 10$\mu$W sensitivity.

• Journal of IKEEE
• /
• v.26 no.3
• /
• pp.396-400
• /
• 2022

In this study, an ICT-based underwater communication monitoring device for underwater structures is implemented based on lifting fixture that transport human bodies found on the seabed to sea level. The lifting fixture is packaged with a retback, sideback, and cartridge that injects air. Monitoring systems are developed in a mobile manner in a portable structure. The underwater ultrasonic sensor signal is supplied using a USB port, and the O/S consists of Linux. For the underwater communication dong test, a measurement test was conducted in real time from 6m to 40m in depth on the east coast. The ultrasonic sound sensor is converted to 2,400 bps to verify the transmission error according to the duality. The communication speed of sensor to monitoring is 115,200 bps, and the speed of communication from controller to receiver is 2,400 bps. In the commercialization stage of the lifting device, it is easy to develop a low-end type and the compatibility is wide.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.8 no.6
• /
• pp.853-861
• /
• 2018

This paper proposes the application of harmonic constraints to address the problems caused by abnormal voltage increases when electric railway vehicles are running. The AC line that supplies the train with power during operation is used to provide electricity of 25kV/60 Hz, but gradually the size and frequency of harmonics involved in the line are varied with the technological evolution of the railroad vehicle electrical equipment. An increase in heat losses due to the failure of the instrument transformer (PT), the main circuit device, which is a serious problem with the recent train safety operation, or to the main displacement voltage. When high frequency components are introduced through low frequency Transformers of the main circuit device, the high intensity of the components is caused by the high intensity of the core and the current flow of the parasitic core is increased, thus generating heat. To solve this problem, the recent adjustment of the sequence has applied artificial NOTCH OFF of the power converter. However, the method of receiving and controlling the OFF signal operates by interaction between the ground and the vehicle's devices, thus it is invalid in the event of failure, and an actual accident is occurring. Therefore, the harmonic currents were required to prevent possible flow of harmonics, and conducted a study to prevent accidental occurrence of train accidents and to verify feasibility of the device through the simulations of the train's experimental analysis and the simulations of the train for safe operation.

• Journal of Korea Multimedia Society
• /
• v.13 no.1
• /
• pp.58-65
• /
• 2010

The final goal of our research is developing not a simple collision a1ann equipment for the blinded walkers, but the apparatus (Audio- Vision System) which can simulate vision based on auditory information so that the blinds can figure the three dimensional space in front of them. On the way to the final goal, in this study, simulation software was developed and verified. Thirty normal volunteers were included in the subject group and the average age Was 25.8 years old. After being accustomed to the system by evaluating 10 blinded virtual spaces, the volunteers performed test using another set of 10 blinded virtual spaces. The results of test were scored by shape, center, margin, and gradient surface of objects in virtual space. The score of each checking point ranged from 1 to 5, and the full score was converted to 100. As results of this study, the total score ranged from 77 to 97 with the average of 88.7. In this study, a simulation software was developed and verified to have acceptable success rale. By combining to visual sensors, the vision-reconstruction system based on auditory signal (Audio-vision System) may be developed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.9-14
• /
• 2016

This study evaluated a digital locking device design using detection distance of 13.4mm of a human body sensing type magnetic field coil. In contrast to digital locking devices that are used nowadays, the existing serial number entering buttons, lighting, number cover, corresponding pcb, exterior case, and data delivery cables have been deleted and are only composed of control ON/OFF power switches and emergency terminals. When the magnetic field coil substrates installed inside the inner case detects the electric resistance delivered from the opposite side of the 12mm interval exterior contacting the glass body part, the corresponding induced current flows. At this time, the magnetic field coil takes the role as a sensor when coil frequency of the circular coil is transformed. The magnetic coil as a sensor detects a change in the oscillation frequency output before and after the body is detected. This is then amplified to larger than 2,000%, transformed into digital signals, and delivered to exclusive software to compare and search for embedded data. The detection time followed by the touch area of the body standard to a $12.8{\emptyset}$ magnetic field coil was 30% contrast at 0.08sec and 80% contrast at 0.03sec, in which the detection distance was 13.4mm, showing the best level.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.1
• /
• pp.136-142
• /
• 2005

In this paper, we wrote about the basic experimentation of Optical CT's temperature characteristic to measure high-current in a super-high-voltage electric power equipment which is using Faraday effect. We used the 1310[nm] Laser Diode as the light source and PIN Photodiode as receiver. For the transmission line of light, we used 30[m] single mode fiber which could maintain the state of polarization in the optical fiber. For the experiment, the temperature transformation device make by aluminium. the The range of current was from 400[A] and 1300[A] and the range of temperature was from $-40[^{\circ}C]\;to\;50[^{\circ}C]$. In a same experimental condition, magnitude increased input current increase follow by increasing proportion of input current.

• Journal of Sensor Science and Technology
• /
• v.11 no.3
• /
• pp.125-131
• /
• 2002

Respiratory air flow rate is necessarily measured for the pulmonary function evaluation. The currently used devices are exposed to the problems of measurement reliability and cross-patient infection. The present study introduced a new technique which converted the bidirectional air flow rate into averaged dynamic pressure based on the famous Bernoulli's energy conservation principle. Single use plastic sensing element was assembled within the flow tube(mouth piece) made of paper, which was named "functional single use flow tube". Experiment demonstrated only ${\pm}1.5%$ relative error in the standard 3L volume measurement procedure well within the error limit suggested by the American Thoracic Society(ATS). Disposable use design completely eliminated cross-patient infection. The present device is best useful and safe for clinical respiratory air flow measurement such as spirometry.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2016.06a
• /
• pp.231-234
• /
• 2016

본 논문에서는 전송하고자 하는 원영상 대신에 전혀 다른 영상을 전송하여 원영상 정보를 보호하는 스테가노그래피(steganography) 기법을 제안한다. 전송할 영상의 자연스러움을 잃어버리지 않으면서 원영상을 복구할 수 있는 차영상 정보를 LSB(Least Significant Bit)에 담고, 픽셀간의 위치 관계를 무작위로 섞어 줌으로써, 원영상을 보호하는 기법을 제안한다. 본 논문에서는 우선 원영상과 전송할 영상 (cover image)의 차영상을 생성하고, 각 픽셀의 차이값을 큰 범위로 양자화하여 차영상의 데이터 크기를 줄인다. 그리고, 각 픽셀의 차이값을 전송할 영상의 4 픽셀에 걸쳐서 하위 2bit 에 나누어 담는다. 8bit 영상에서 하위 2 bit 를 다루기 때문에, 각 채널 밝기값의 최대 차이값은 3 으로 설정되어 자연스럽게 영상을 생성할 수 있다. 끝으로 신호의 보호를 위하여 차영상의 픽셀과 전송할 영상의 픽셀간의 대응위치를 무작위 순열로 변환하여 외부에서 쉽게 복원할 수 없도록 한다. 이러한 스테가노그래피 제안 기법을 통하여 원영상 대신에 커버 영상을 전송함으로써, 자연스러운 정보전송이 가능하며, 외부의 감시와 복원에 안전한 정보보호 기능이 강화될 수 있다. 여러 영상에 대한 실험을 통한 제안 기법에 의하면, 전송되는 커버 영상이 자연스럽기 때문에 외부에서 정보가 숨겨진 사실을 느끼지 못하며, 송수신 장치에 내장된 무작위 순열을 통하여 외부에서는 원영상 정보를 복구하는 것도 매우 어렵게 되어 있음을 확인하였다. 본 제안 기법은 군사통신이나 중요한 정보를 다루는 기관에서의 정보 전달 및 정보보호 시스템에서 사용될 수 있다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.7
• /
• pp.1415-1422
• /
• 2011

In this paper, full color billboards for the efficient expression of the resolution to offer dual-scanning control method, using the LED display it on a fixed pixel video signal to the pixel dot pattern was changed. And DICT(Dynamic Image Correction Technology) using the main controller in accordance with video information, histogram equalization of image gray scale values to be uniformly distributed, and dynamically improves image quality by converting the area, and a dual auto-scan input video switching controller board as the pixels in the LED Module by controlling the physical manifestation of the existing board LED pixel dots than 4 times the resolution proposes a technique that can be expressed and made it through testing verified the performance.