Abstract
In this paper, we wrote about the basic experimentation of Optical CT's temperature characteristic to measure high-current in a super-high-voltage electric power equipment which is using Faraday effect. We used the 1310[nm] Laser Diode as the light source and PIN Photodiode as receiver. For the transmission line of light, we used 30[m] single mode fiber which could maintain the state of polarization in the optical fiber. For the experiment, the temperature transformation device make by aluminium. the The range of current was from 400[A] and 1300[A] and the range of temperature was from $-40[^{\circ}C]\;to\;50[^{\circ}C]$. In a same experimental condition, magnitude increased input current increase follow by increasing proportion of input current.
본 논문에서는 패러데이 효과(Faraday effect)를 이용한 초고압 전력설비에서의 대전류 측정을 위한 광CT의 온도 특성에 대한 기초연구를 기술하였다. 1310[nm] 레이저 다이오드를 광원으로 사용하고 PIN-Photodiode를 수신부로 사용하고 광의 전송로는 Fiber내에서 편광상태를 유지 할 수 있는 30[m]의 단일 모드 광섬유를 사용하였다. 온도 변환에 따른 실험을 하기 위한 온도변환장치는 알루미늄으로 제작하였다. 전류의 측정은 400[A]에서 1300[A]까지의 범위에서 측정하였으며 온도는 $-40[^{\circ}C]$에서 $50[^{\circ}C]$까지 $10[^{\circ}C]$씩 증가시키면서 측정하였다. 동일한 실험 환경하에서 출력신호는 인가전류가 증가할수록, 주변온도가 높을수록 비례하여 증가하였다.