• The Research Journal of the Costume Culture
• /
• v.16 no.1
• /
• pp.48-57
• /
• 2008

The purpose of this study was to examine the inconvenience when putting on stretchable pants and to analyze the whole actual conditions of making of the lining fabrics. For this study, we conducted a survey of women in their twenties and collected the basic data and master pattern through material of a woman's wear brand and the interview and questionnaires. The results of this study were as follows. First, the survey result for the woman consumers it showed that the most uncomfortable problem about the lining of pants was not sufficient stretch as much as the out-shell. Secondly, it was shown that many brands(46.7%) were using the lining fabrics of stretch clothes mixed with 'non-stretch fabrics' and 'stretch fabrics'. The result of lining pattern making for the stretch pants showed that the ease of the lining fabrics was 0 to 4cm in the hip girth more than out-shell. The ease in crotch width was 0 to 1.3cm for lining fabrics. But in the stretch lining fabrics the ease for front crotch width was 0 to 1cm more than out-shell. The lengths of crotch rising were -0.7 to 1.3cm for the non-stretch lining fabrics and -1 to 1cm for the stretch lining fabrics.

• The Research Journal of the Costume Culture
• /
• v.16 no.4
• /
• pp.609-618
• /
• 2008

The purpose of this study is to examine the inconvenience when putting on stretch pants and to compare and analyze the pattern making method of pants made of the stretch and non-stretch fabric to develop functional and good looking stretch pants. For this study, we conducted a survey of women in their twenties and collected the basic data and master pattern through material of a woman's wear brand and the interview and questionnaires. The results of this study are as follows. First, the survey result for the woman consumers showed that pants were estimated as the most uncomfortable item among the stretch clothes and when they put the stretch pants on, the most uncomfortable parts of out-shell were the hip girth and rise. Secondly, the result of pattern making method of the pants was as follows. The ease of the stretch pants pattern was 0cm in the waist girth and -1 to -1.5cm in the hip girth more than non-stretch pants. The ease in crotch, inseam and outseam length was 0cm for both.

• Composites Research
• /
• v.35 no.4
• /
• pp.283-287
• /
• 2022

Stretchable strain sensors have been developed for potential future applications including wearable devices and health monitoring. For practical implementation of stretchable strain sensors, their stability and repeatability are one of the important aspects to be considered. In this work, we utilized 3D printed polymer structures having kirigami patterns to improve the stretchability and reduce the hysteresis. The polymer structures were coated with graphene/carbon nanofiber hybrids to make a robust electrical network. The stretchable strain sensors showed a high gauge of 36 at a strain of 32%. Because of the kirigami structures and the robust graphene/carbon nanofiber coating, the sensors also exhibited stable resistance responses at various strains ranging from 1% to 30%.

• Journal of Fashion Business
• /
• v.11 no.4
• /
• pp.92-100
• /
• 2007

The most emphasized materials in the modern fashion are the elastic materials with the advent of sportswear. In the area of elastic materials, the technology of foaming plastics became main research area. As novel materials, latex and neoprene based fabrics are emerging for the elastic material, among those elastic material staged by renowned fashion designers. We searched those works through literature and pictures, and examined the physical properties. Neoprene composite with filament knit fabrics are excellent in strength and water-proof. Latex fabrics gave smooth feel and elastic feel. These may be adequate for aesthetic textile material. Based on these characteristics, these techno-texitiles will find broad applications in the fashionable materials.

• Journal of the Microelectronics and Packaging Society
• /
• v.21 no.4
• /
• pp.77-82
• /
• 2014

Stretchable electrodes are focused due to many demands for soft electronics. One of the candidates, carbon black composites have advantages of low cost, easy processing and decreasing resistivity in a certain range during stretching. However, the electrical conductivity of carbon black composites is not enough for electronic devices. Graphene is 2-dimensional nanostructured carbon based material which shows good electrical properties and flexibility. They may help to improve electrical conductivity of the carbon black composites. In this study, graphene was added to a carbon black electrode to enhance electrical properties and investigated. Electrical resistivity of graphene added carbon electrode decreased comparing with that of carbon black electrode because graphene bridged non-contacting carbon black aggregates to strengthen the conductive network. Also graphene reduced an increase in the resistance of the carbon black electrode applied to strain because they connected gap of separated carbon black aggregates and aligned along the stretching direction at the same time. In conclusion, an addition of graphene to carbon black gives two benefits on the electrical properties of carbon black composite as a stretchable electrode.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.12 s.148
• /
• pp.1535-1545
• /
• 2005

The study aimed firstly, to develop the women's bodysuit sleeve block construction method adopting the appropriate pattern reduction rates according to the fabric stretch property. Secondly, the details applied to the bodysuit sleeve block drafting (Dr the educational and industrial usage were proposed. For these, several distinguishing bodysuit sleeve pattern making methods(i.e. Joseph-Armstrong: T1, Shoben & Ward: T2, Esmod: T3 and Mixed Joseph-Armstrong: T4) were analyzed and divided into two categories that adopt 1) the equally (i.e., T1) and 2) the differently(i.e., T2, T3 & T4) distributed front and back armhole length measurements. Women's sleeve samples were made for the research using the same stretch fabric($50\%\;and\; 70\%$ in wale and course each) to the previous research. A group comprising 5 relevant experts evaluated the fit and comfort features of the samples. Experiments analyzed the appearance of sleeve samples focused on total 13 evaluation parts(including the front/side/back fit tolerance, sleeve centre line, sleeve length, appropriateness of the sleeve appearance balanced with the bodysuit and etc.): and performed the comfort test evaluating three kinds(vertical-front/vertical-side/ horizontal) of arm movements. The most appropriate bodysuit sleeve to fulfil the original aims of the study was suggested. The findings and suggestions throughout the study were: 1) the measurements and required reduction rates for the bodysuit sleeve block developed: outer sleeve length (with 1.0 RR), crown height(with 0.7 RR), front and back armhole lengths measured on the bodysuit blocks ($0\%$ ease amount), elbow width(0.9/0.95 RR), wrist girth measurements(from $12\%\;to\;18\%$ tolerances can be given to): and 2) the differently distributed front and back armhole length measurements resulted in the better fit and comfort through the research.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.3
• /
• pp.49-54
• /
• 2020

To attach a stretchable/flexible electrode to something or something to on electrode, conductive adhesives must be stretchable/flexible to suit the properties of the electrode. In particular, conductive adhesive require durability and heat resistance, and unlike conventional adhesives, they should also have conductivity. To this end, Epoxy, which has good strength and adhesion, was selected as an adhesive, and a plasticizer and a reinforcement were mixed instead of a two-liquid material consisting of a conventional theme and a hardener, and a four-liquid material was used to give stretchability/flexibility to high molecules. The conductive filler was selected as silver, a material with low resistance, and for high conductivity, three shapes of Ag particles were used to increase packing density. Conductivity was compared with these developed conductive adhesives and two epoxy-based conductive adhesives being sold in practice, and about 10 times better conductivity results were obtained than products being actually sold. In addition, conductivity, mechanical properties, adhesion and strength were evaluated according to the presence of plasticizers and reinforcement agent. There was also no problem with 60% tensile after 5 minutes of curing at 120℃, and pencil hardness was excellently measured at 6H. As a result of checking the adhesion of electrodes through 3M tape test, all of them showed excellent results regardless of the mixing ratio of binders. After attaching the Cu sheet on top of the electrode through conductive adhesive, the contact resistance was checked and showed excellent performance with 0.3 Ω.

• Science of Emotion and Sensibility
• /
• v.24 no.1
• /
• pp.105-114
• /
• 2021

This study determines the differences between Korean female university students and their Chinese counterparts residing in Korea by evaluating the subjective sensation and tactile preference in fabrics for casual shirts. Seven types of white causal shirt fabrics were selected as specimens from those available in spring and autumn shirt collection. The fabrics were made from various fibers (cotton 100%, polyester 100%, flax 100%, polyester 80%/cotton 20%, polyester 65%/cotton 35%, polyester 50%/cotton 45%/spandex 5%, and polyester 50%/modal 50%). Forty Korean and Chinese female university students subjectively assessed the subjective sensation of fabrics used for casual shirts. Participants were asked to observe the seven types of fabrics and complete the questionnaire. The subjective sensation to be assessed for white casual shirt fabrics was classified into the following four factors: smoothness, lightness, softness, and stretchiness. Subjective sensation factors showed partially significant differences by nationality. Korean female students evaluated cotton fabric as being light, whereas their Chinese counterparts evaluated the polyester/cotton/spandex blended fabric as light. Korean female students evaluated polyester/modal blended fabric as being stretchable. The tactile preference for fiber composition of the fabrics showed partially significant differences by nationality. Korean female students preferred cotton 80%/polyester 20% blended fabric, polyester 50%/cotton 45%/spandex 5% blended fabric, and flax 100% fabric. The subjective sensation of the fabrics had different effects on preferences by nationality. Smoothness and softness had positive effects on preferences for the fabrics of Korean students. However, smoothness, softness, and stretchiness had positive effects on the preferences of Chinese students. The subjective sensation and tactile preference for casual shirt fabrics showed a difference between Korean female students and their Chinese counterparts. Therefore, when planning casual shirt fabrics for female university students, it is necessary to reflect on these differences in subjective sensation and tactile preference.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2009.11a
• /
• pp.143-144
• /
• 2009

This is studies about development of natural stretch Cotton-like fabric of using PET yarns. The natural stretch Cotton-like yarn is a complex yarn combining PET spiral crimp yarn and PET POY yarn using air texturing technology. The complex yarn is natural stretch function and cotton-like effect itself by technology of air texturing process.

• Fashion & Textile Research Journal
• /
• v.14 no.2
• /
• pp.277-285
• /
• 2012

This research studied how to develop tight upper sportswear from 3D scan data considering fabric stretch property. Subjects were five Korean men of average figure in their 20's. Scanning was done for ten postures via vitus smart/pro(Techmath LTD). Analyzing from 3D scan data, more than 70% of the upper body surface showed surface change rate under 20%. It was shoulder and under arm side part that showed most noticeable body surface change when moving. A parametric model with convex surface was generated and flattened onto the plane, resulting 2D pattern. The error rate occurring in the process of 3D to 2D conversion was 0.2% for outline and 0.13% for area, respectively. Thirteen kinds of stretchable fabrics in the market were collected for this study. Stretch property was in the range of 16.0~58.2% for wale direction; 23.1~78.4% for course. Based on wear trial test, four fabrics were chosen for making the 1st experimental garment and finally one fabric was chosen for the 2nd one, which was developed applying 4 kinds of crosswise reduction rate on 2D pattern: 0, 5, 10, and 15%. Through wear trial test and garment pressure measurement, experimental garment applied with 10% pattern reduction rate was evaluated as most comfortable and considerable.