• Journal of Bio-Environment Control
• /
• v.29 no.3
• /
• pp.277-284
• /
• 2020

To increase the utilization of the intelligent methodology of smart farm management, estimation modeling techniques are required to assess prior examination of crops and environment changes in realtime. A mandatory environmental factor such as CO₂ is challenging to establish a reliable estimation model in time domain accounted for indoor agricultural facilities where various correlated variables are highly coupled. Thus, this study was conducted to develop an artificial neural network for reducing time complexity by using environmental information distributed in adjacent areas from a time perspective as input and output variables as CO₂. The environmental factors in the smart farm were continuously measured using measuring devices that integrated sensors through experiments. Modeling 1 predicted by the mean data of the experiment period and modeling 2 predicted by the day-to-day data were constructed to predict the correlation of CO₂. Modeling 2 predicted by the previous day's data learning performed better than Modeling 1 predicted by the 60-day average value. Until 30 days, most of them showed a coefficient of determination between 0.70 and 0.88, and Model 2 was about 0.05 higher. However, after 30 days, the modeling coefficients of both models showed low values below 0.50. According to the modeling approach, comparing and analyzing the values of the determinants showed that data from adjacent time zones were relatively high performance at points requiring prediction rather than a fixed neural network model.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.509-509
• /
• 2015

물 수요관리측면에 대한 정책을 수립하기 위해서는 현재 또는 장래에 대한 용수수급의 정확한 이해를 필요로 한다. 이를 위해서는 용수 수요량 및 공급량뿐만 아니라 여러 산정요소를 필요로 하는데, 그 중 회귀수량은 물이 이용되고 다시 하천으로 회귀되어 이용될 가능성이 있는 수량으로 정의되며, 용수수급 및 용수절약 측면에서 회귀 수량은 중요한 요소라 할 수 있다. 회귀수량 조사는 유역조사 사업 이래, 10년간 생?공용수를 중심으로 미시적, 거시적으로 조사를 시행하였으나, 측정 자료의 신뢰도, 조사방법 및 지점선정 등의 문제로 인하여 조사 성과의 활용성이 매우 낮은 실정이다. 수자원장기종합계획등에서는 수자원관련 계획 수립시 생?공용수의 회귀율을 65 %로 적용하고 있으나, 이는 1970년대 말의 사회적 여건 및 경제적 상황이 반연된 결과로 현재 상황에 적용되기 곤란하다. 따라서, 현재 실정에 맞는 회귀율 산정은 반드시 필요하게 된다. 본 연구에서는 기존 생활용수 회귀수량 산정 연구 한계를 보완하고 유역조사 시행을 위한 개선된 회귀수량을 산정하고자 한다. 본 연구는 서울시 중랑물재생센터 처리구역을 기반으로 중랑천유역을 시험유역으로 선정하였다. 기존 회귀수량 산정방법을 개선하기 위해 시험유역 회귀수량 산정을 위한 가용 자료 분석 및 용수흐름 네트워크 공간분석을 추가로 진행하였다. 가용자료로 시험 유역내 상수공급자료(정수장 공급량, 상수계통도, 유수 및 누수율), 하수처리자료(하수처리구역도, 하수처리계통도, 유입량 및 방류량) 및 기상자료(기상청 지점 및 AWS 강우자료)를 구축하였고 각각의 상수계통도 및 하수처리계통도로부터 용수 흐름 네트워크망을 구축하였다. 상수공급자료로부터 상수계통도 공급지역을 구분하여 월별 유수율에 따른 월별 실 공급량을 산정하였다. 하수처리자료로부터 시험유역에서의 월별하수처리 유입량 및 방류량을 산정하였다. 최종적으로 회귀율(하수처리 방류량/실 공급량)을 산정한 결과 연평균 회귀율은 각각 93.97 %(2011년), 95.02%(2012년)로 과잉 추정 되었으며 7 ~ 9월의 회귀율은 110 ~ 120 %로 유입량을 초과하였다. 이는, 하수처리로 유입되는 유입량의 하수관거는 합류식으로 구축되어 7 ~ 9월에 많은 양의 강우량이 우수관을 통해 하수처리장으로 이송되어 생활용수 이외에 자연적인 공급량으로 인한 것으로 분석되었다. 따라서, 월별 회귀율 산정을 위해서는 불투수층에서의 면적강우량(mm)을 유입량(m3/s)으로 환산된 값을 고려하여 회귀율을 재산정하였다. 그 결과 연평균 회귀율은 각각 78.27 %(2011년), 77.58 %(2012년)로 나타났다.각각의 월별 회귀율도 매우 유사하게 나타났으며 과거 관용적으로 사용된 65 % 회귀율보다 약 12 ~ 13%로 증가하였으며 이는, 하수처리시설 구축 및 처리효율의 증가와 상수처리시설의 관로시설의 개량으로 인한 유수율 및 누수율 감소로 회귀율이 증가한 것으로 판단된다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.587-593
• /
• 2019

The field of geospatial information is rapidly changing due to the development of sensor and data processing technology that can acquire location information. And demand is increasing in various related industries and social activities. The construction and utilization of three dimensional geospatial information that is easy to understand and easy to understand can be an essential element to improve the quality and reliability of related services. In recent years, 3D laser scanners are widely used as 3D geospatial information construction technology. However, 3D laser scanners may cause shadow areas where data acquisition is not possible when objects are large in size or complex in shape. In this study, 3D model of an object has been created by acquiring oblique images using an unmanned aerial vehicle and processing the data. The study area was selected, oblique images were acquired using an unmanned aerial vehicle, and point cloud type 3D model with 0.02 m spacing was created through data processing. The accuracy of the 3D model was 0.19m and the average was 0.11m. In the future, if accuracy is evaluated according to shooting and data processing methods, and 3D model construction and accuracy evaluation and analysis according to camera types are performed, the accuracy of the 3D model will be improved. In the point cloud type 3D model, Cross section generation, drawing of objects, and so on, it is possible to improve work efficiency of spatial information service and related work.

• Journal of Korea Port Economic Association
• /
• v.37 no.4
• /
• pp.71-87
• /
• 2021

This study aims to reveal how a port affects the living conditions of its neighborhood area with a case study of Pusan New Port and to suggest several implications to port policy. PLS-SEM reflective measurement model satisfies the criteria on reliability and validity, and also structural model meets the criteria in terms of R2, path coefficients' significance and predictive relevance(Q2). The results of PLS-SEM support the hypotheses of this study: The expansion of Pusan New Port contributes to the improvement of living conditions of Gangseo-gu(nearby area) through its significant and sequential effects on the employment and population increase of Gangseo-gu. The originality of this study can be found in enunciating that a port plays a role as a driving force of the betterment of living conditions of its nearby Gu-level area. In terms of policy, central and local governments and port related companies should cooperate with each other to reinforce the acceptability of port policy through the improvement of the living conditions of port neighborhood area. To evaluate comprehensively the influence of a port on its neighborhood area, a further study needs to identify how a port affects the quality of life of the area or what kinds of socio-economic effects a port has on the area.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.7
• /
• pp.17-24
• /
• 2010

Load Resistance Factor Design method is used increasingly in geotechnical design world widely and resistance factors for drilled shafts are suggested by AASHTO. However, these resistance factors are determined for intact rock conditions; by comparison, most of bedrocks in Korea have weathered condition, so that applying the AASHTO resistance factors is not reasonable. Thus, this study suggests the proper resistance factors for design of drilled shaft in Korea. The 22 cases of pile load test data from 8 sites were chosen and reliability-based approach is used to analyze the data. Reliability analysis was performed by First Order Second Moment Method (FOSM) applying 4 bearing capacity equations. As a result, when the Factor of Safety (FOS) was selected as 3.0, the target reliability indexes (${\beta}_c$) were evaluated as 2.01~2.30. Resistance factors and load factors are determined from optimization based on above results. The resistance factors ranged between 0.48 and 0.56 and load factors for dead load and live load are evaluated as approximately 1.25 and 1.75 respectively. However, when the target reliabilities are considered as 3.0, the resistance factors are evaluated as approximately 50% of the results when the target reliability index was 2.0.

• Journal of the Korean Applied Science and Technology
• /
• v.40 no.6
• /
• pp.1201-1212
• /
• 2023

This study aimed to analyze the changes in underwater anxiety and water safety consciousness among college students through participation in survival swimming education and the relationship between these changes and various factors. To achieve this, 200 college students who were participating in survival swimming education from universities located in the Busan-Ulsan-Gyeongnam region were selected as participants using convenience sampling. Among them, a final valid sample of 191 students was utilized. Data analysis was conducted using SPSS 25.0 statistical software, including exploratory factor analysis, reliability analysis, paired sample t-test, repeated measures ANOVA. The results are as follows: Firstly, college students who participated in survival swimming education showed a decrease in post-test underwater anxiety and an increase in water safety consciousness compared to pre-test. Secondly, the interaction between the groups based on the presence or absence of swimming education experience and time showed a significant effect only in the safety education, a sub-factor of water safety consciousness. Based on these results, the effectiveness of survival swimming education for college students could be confirmed, and further directions for expanding survival swimming education in university settings could be considered.

• Current Research on Agriculture and Life Sciences
• /
• v.6
• /
• pp.171-180
• /
• 1988

Parathion is widely used in agriculture, but it is highly toxic and now clear that parathion behaves like a cholinergic drug by inhibiting the enzyme cholinesterase. In order to know the effect of toxicity and cholinesterase activity in rats injected repeatedly with parathion, cholinesterase activity in plasma, whole brain and spinal cord, and the subacute toxicity after repetitive intraperitoneal injection of parathion 20 times every 3 days were investigated. The results obtained were summerized as follows ; $LD_{50}$ value of parathion given intraperitoneally to rats was 10.5mg/kg(95% confidence limits, 6.6-16.8mg/kg). In subacute toxicity test of parathion injected intraperitoneally, mortality of parathion-pretreated rats(B : 57%, C : 83%) were increased in comparison with the control(50%). Cholinesterase activities in plasma of parathion-pretreated rats(B : 0.47 U/ml, C : 0.36 U/ml, AA : 0.31 U/ml, B : 0.26 U/ml, CC : 0.17 U/ml) were significantly decreased in comparison with the control(0.58 U/ml). Cholinesterase activities in spinal cord of parathion-pretreated rats(B : 1.87 U/g, C : 1.29 U/g, AA : 1.27 U/g, BB : 0.71 U/g, CC : 0.25 U/g) were decreased in comparison with the control(2.48 U/g). Cholinesterase activities in whole brain of parathion-pretreated rats(B : 2.52 U/g, C : 1.32 U/g, AA : 2.48 U/g, BB : 1.08 U/g, CC : 0.51 U/g) were significantly inhibited in comparison with the control(4.67 U/g). However, there were no differences in the urea nitrogen and creatinine concentrations between parathion-pretreated rats and control.

• Clinical and Experimental Pediatrics
• /
• v.49 no.8
• /
• pp.851-856
• /
• 2006

Purpose : The purpose of this study is to find out the diagnostic significance of serum bile acid on total parenteral nutrition induced cholestasis in premature infants. Methods : Infants without cholestasis were classified into postnatal days and each change of serum bile acid was measured and analyzed. Also, the serum direct bilirubin, serum bile acid, ${\gamma}$-glutamic acid transferase, and alkaline phosphatase of premature infants with total parenteral nutrition induced cholestasis were measured for comparison and analysis of their correlation. Results : Changes of serum bile acid analysis after birth showed no significant difference between boys and girls, between premature infants and term infants without cholestasis. Serum bile acid levels are constant after two weeks after birth in neonates without cholestasis. In premature infants with total parenteral nutrition induced cholestasis, the increase of serum direct bilirubin over 2 mg/dL was $34.9{\pm}18.3$ days after birth, and the increase of serum bile acid was $28.1{\pm}18.3$ days. Its increase was about 1 week faster than serum direct bilirubin, however, there was no statistical significance(P=0.114). Comparing analysis of serum bile acid, ${\gamma}$-glutamic acid transferase, and alkaline phosphatase, serum bile acid showed the highest correlation to serum direct bilirubin(r=0.487, P=0.000). Conclusion : Serum bile acid is an important parameter of total parenteral nutrition induced cholestasis in premature infants and will be useful for early diagnosis and treatment.

• Korean Journal of Culture and Social Issue
• /
• v.28 no.2
• /
• pp.187-217
• /
• 2022

The aim of this study is to examine the psychometric properties of the Korean version of the Post-traumatic Stress Disorder Checklist for DSM-5(PCL-5). For this purpose, online surveys were conducted for two times with a one year interval using the data from 1,077 Korean adults at time 1, and 563 Korean adults at time 2. First, from the result of the confirmatory factor analysis, comparing the model fit of the 1, 4, 6, and 7-factor model, the 4, 6, and 7-factor model showed a acceptable fit, and the best fit was seen in the order of the 7, 6, 4-factor model. Second, the internal consistency, omega coefficient, construct validity, average variance extracted, and test-retest reliability results were all satisfactory.. Third, a correlation analysis with the K-PC-PTSD-5 and the sub-factors of BSI-18 was conducted to check the validity of the Korean Version of PCL-5. As a result, a positive correlation was seen with both K-PC-PTSD-5 and BSI-18. Fourth, a hierarchical multiple regression was performed to examine whether the Korean Version of PCL-5 predicts future PTSD, depression, anxiety, and somatization. As a result, the Korean Version of PCL-5 measured at time 1 significantly predicted PTSD, depression, anxiety, and somatization symptoms at time 2. Fifth, by analyzing the ROC curve, the discriminant power of PCL-5 for screening PTSD symptom groups was confirmed, and the best cut-off score was suggested. As a result of the longitudinal validation of Korean version of PCL-5, it was found that this scale is a reliable and valid measure for Korean adults. By looking into the predictive validity of the scale, it was found that the Korean version of PCL-5 can predict not only PTSD symptoms but also PTSD-related symptoms such as depression, anxiety, and somatization. Also, this study differs from previous validation studies measuring PTSD symptoms in that it suggested a cut-off score to help differentiate PTSD symptom groups.

• The Journal of Korean Society for Radiation Therapy
• /
• v.26 no.2
• /
• pp.207-216
• /
• 2014

Purpose : We present a method to reduce this gap and complete the treatment plan, to be made by the re-optimization is performed in the same conditions as the initial treatment plan different from Monaco treatment planning system. Materials and Methods : The optimization is carried in two steps when performing the inverse calculation for volumetric modulated radiation therapy or intensity modulated radiation therapy in Monaco treatment planning system. This study was the first plan with a complete optimization in two steps by performing all of the treatment plan, without changing the optimized condition from Step 1 to Step 2, a typical sequential optimization performed. At this time, the experiment was carried out with a pencil beam and Monte Carlo algorithm is applied In step 2. We compared initial plan and re-optimized plan with the same optimized conditions. And then evaluated the planning dose by measurement. When performing a re-optimization for the initial treatment plan, the second plan applied the step optimization. Results : When the common optimization again carried out in the same conditions in the initial treatment plan was completed, the result is not the same. From a comparison of the treatment planning system, similar to the dose-volume the histogram showed a similar trend, but exhibit different values that do not satisfy the conditions best optimized dose, dose homogeneity and dose limits. Also showed more than 20% different in comparison dosimetry. If different dose algorithms, this measure is not the same out. Conclusion : The process of performing a number of trial and error, and you get to the ultimate goal of treatment planning optimization process. If carried out to optimize the completion of the initial trust only the treatment plan, we could be made of another treatment plan. The similar treatment plan could not satisfy to optimization results. When you perform re-optimization process, you will need to apply the step optimized conditions, making sure the dose distribution through the optimization process.