• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.10
• /
• pp.1179-1185
• /
• 2011

Cold and hot-rolled carbon steel sheets are commonly used in railroad cars or commercial vehicles such as the automobile. The sheets used in these applications are mainly fabricated by spot welding, which is a type of electric resistance welding. However, the fatigue strength of a spot-welded joint is lower than that of the base metal because of high stress concentration at the nugget edge of the spot-welded part. In particular, the fatigue strength of the joint is influenced by not only geometrical and mechanical factors but also the welding conditions for the spot-welded joint. Therefore, there is a need for establishing a reasonable criterion for a long-life design for spot-welded structures. In this thesis, ${\Delta}P-N_f$ relation curves have been used to determine a long-life fatigue-design criterion for thin-sheet structures. However, as these curves vary under the influence of welding conditions, mechanical conditions, geometrical factors, etc. It is very difficult to systematically determine a fatigue-design criterion on the basis of these curves. Therefore, in order to eliminate such problems, the welding residual stresses generated during welding and the stress distributions around the weld generated by external forces were numerically and experimentally analyzed on the basis of the results, reassessed fatigue strength of gas welded joints.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.3
• /
• pp.464-477
• /
• 2013

There is a great need to develop a training program proven to change behavior and improve knowledge. The purpose of this study was to evaluate employee hygiene knowledge, hygiene practice, and cleanliness, before and after HACCP system implementation at one small-size restaurant. The efficiency of the system was analyzed using time-temperature control after implementation of u-HACCP$^{(R)}$. The employee hygiene knowledge and practices showed a significant improvement (p<0.05) after HACCP system implementation. In non-heating processes, such as seasoned lettuce, controlling the sanitation of the cooking facility and the chlorination of raw ingredients were identified as the significant CCP. Sanitizing was an important CCP because total bacteria were reduced 2~4 log CFU/g after implementation of HACCP. In bean sprouts, microbial levels decreased from 4.20 logCFU/g to 3.26 logCFU/g. There were significant correlations between hygiene knowledge, practice, and microbiological contamination. First, personnel hygiene had a significant correlation with 'total food hygiene knowledge' scores (p<0.05). Second, total food hygiene practice scores had a significant correlation (p<0.05) with improved microbiological qualities of lettuce salad. Third, concerning the assessment of microbiological quality after 1 month, there were significant (p<0.05) improvements in times of heating, and the washing and division process. On the other hand, after 2 months, microbiological was maintained, although only two categories (division process and kitchen floor) were improved. This study also investigated time-temperature control by using ubiquitous sensor networks (USN) consisting of an ubi reader (CCP thermometer), an ubi manager (tablet PC), and application software (HACCP monitoring system). The result of the temperature control before and after USN showed better thermal management (accuracy, efficiency, consistency of time control). Based on the results, strict time-temperature control could be an effective method to prevent foodborne illness.

• Journal of Wetlands Research
• /
• v.14 no.2
• /
• pp.243-254
• /
• 2012

Recently, the use of radar rainfall data that can help tracking of the development and movement of rainfall's spatial distribution is drawing much attention in hydrology. The reliability of existing radar rainfall compared to gauge rainfall data on the ground has not yet been confirmed and so we have difficulties to apply the radar rainfall in hydrology. The radar rainfall for the applications in hydrology are adjusted merging method derived from gage. This study uses the Mean-Field Bias (MFB) and Statistical Objective Analysis (SOA) as correction methods to create adjusted grid-based radar rainfall data which can represent the temporal and spatial distribution of rainfall. This study used a storm event occurred in August 2010 for the adjustment of radar rainfall. In addition, the grid-based distributed rainfall-runoff model (Vflo), which enables more detailed examinations of spatial flux changes in the basin rather than the lumped hydrological models, has been applied to Gamcheon river basin which is a tributary of Nakdong River located in south-eastern part of the Korean peninsular and the basin area is $1005km^2$. The simulated runoff was compared with the observed runoff in an attempt to evaluate the usability of radar rainfall data and the reliability of the correction methods. The error range of peak discharge using each correction method was within 20 percent and the efficiency of the model was between 60 and 80 percent. In particular, the SOA method showed better results than MFB method. Therefore, the SOA method could be used for the adjustment of grid-based radar rainfall and the adjusted radar rainfall can be used as an input data of rainfall-runoff models.

• Korean Journal of Microbiology
• /
• v.41 no.1
• /
• pp.60-66
• /
• 2005

To select the rapid and efficient molecular subtyping method for epidemiologic monitoring of Staphylococcus aureus (S. aureus) strains at clinical laboratory levels, a total 116 of S. aureus and MRSA (methicillin-resistant S. aureus) strains from diverse animal species [Korean cattle, goat, pig, dog, chicken, mouse] and also humans were analyzed. To evaluate the discriminatory ability (DA) of individual PCR methods, random amplified polymorphic of DNA [RAPD; 4M & RA primer], repetitive extragenic palindromic sequences PCR (REP-PCR), and enterobacterial repetitive intergenic consensus sequences PCR (ERIC-PCR) methods were conducted and then compared on their Simpson's index of diversity (SID) values based on the dendrogram patterns, which was produced by software program (BiolD2+ & GelCompar II). In first, RAPD using the 4M primer (SID 0.915) was expressed more higher SID value than that of RA primer (SID 0.874). 4M primer was expressed more powerful DA than RA. Both REP-PCR (SID 0.930) and ERIC-PCR (SID 0.929) methods showed much more higher DA than that of RAPD. According to the present results, both REP-PCR and ERIC-PCR among the tested analysis methods were found as the most reliable and discriminative molecular subtyping method, because they expressed the highest DA for the present S. aureus and MRSA strains.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.14 no.4
• /
• pp.239-248
• /
• 2011

This paper evaluated types and characteristics of development projects occurred in coastal area (Public Water) by analyzing an application status of Sea Area Utilization Conference System that effective protect and manage marine environment and ecosystem from various artificial utilization and development enforced in 2008. Also, system improvement for stable settlement and security of efficiency considering exposed problems during system enforcement were diagnosed. The number of Sea Area Utilization Conference (SAUC) performanced during the period of 2009-2010 was 3,705, which consisted of simple SAUC (87.0%), general SAUC (12.8%), and Sea Area Utilization Impact Assessment (SAUIC; 0.2%). The general SAUC was accomplished for Public Water reclamation (43.4%), seawater supply and drainage (17.5%), dredging sediment (5.5%), installation of port facilities (4.6%) and fishing harbor facilities (2.3%), and others (23.4%). Statements of Environmental Impact Assessment (EIA) were reviewed mainly for construction of port facilities (32.9%), followed by construction of industrial complex, development of tourism and leisure complex, road construction, and development of energy facilities. It would be necessary to strengthen effectiveness of the system, advertisement, and capability of conference and review agency, and to enhance confidence of marine EIA continuously, according to the increase of development projects, and diversity and enlargement of development types.

• Journal of Korea Water Resources Association
• /
• v.54 no.12
• /
• pp.1295-1304
• /
• 2021

For the efficient use and management of water resources, a reliable rainfall-runoff analysis is necessary. Still, continuous hydrological data and rainfall-runoff data are insufficient to secure through measurements and models. In particular, as part of the reasonable improvement of a rainfall-runoff model in the case of an ungauged watershed, regionalization is being used to transfer the parameters necessary for the model application to the ungauged watershed. In this study, the GR4J model was selected, and the SCEM-UA method was used to optimize parameters. The rainfall-runoff model for the analysis of the correlation between watershed characteristics and parameters obtained through the model was regionalized by the Copula function, and rainfall-runoff analysis with the regionalized parameters was performed on the ungauged watershed. In the process, the intermediate state variables of the rainfall-runoff model were extracted, and the correlation analysis between water level and the ground water level was investigated. Furthermore, in the process of rainfall-runoff analysis, the Standardized State variable Drought Index (SSDI) was calculated by calculating and indexing the state variables of the GR4J model. and the calculated SSDI was compared with the standardized Precipitation index (SPI), and the hydrological suitability evaluation of the drought index was performed to confirm the possibility of drought monitoring and application in the ungauged watershed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1756-1761
• /
• 2006

본 연구의 목적은 임진강 유역을 대상으로 2005년에 발생한 유출특성을 분석하는데 있다. 임진강 유역은 유역전체 면적중 2/3이상이 북한지역에 위치하고 있어서 전체적인 수문관측 자료를 수집하기 어려운 상황에 있으나, 가용한 수문관측 자료 및 유량측정성과를 이용하여 5개 지점에 대한 유출특성을 분석하였다. 임진강 유역에서는 30분 단위의 연속적인 우량 및 수위관측(건설교통부)을 하고 있으며, 기상청에서는 1시간 단위의 기상관측을 하고 있다. 우량 및 수위자료의 수집과 검토를 통하여 유역면적우량과 5개 수위관측소의 수위를 최종 확정하였다. 그리고 2005년에 측정한 유량측정성과를 통하여 유량측정성과에 대한 불확실도, 기본 수리특성 분석, 수위-유량관계곡선식을 개발하여 유량을 산정하였다. 산정된 유량은 월별, 주요 호우사상별 유출률 분석을 통하여 합리적인 유출률 범위내에서 재 조정절차를 거쳐 최종 유량을 확정하였다. 산정된 유출률은 57.0%(영중)${\sim}$72.1%(적성)의 유출률을 보였으며, 2004년 임진강 유량측정용역 보고서의 유출률과 비교한 결과 일부지점을 제외하고는 비교적 일치하는 것으로 나타났다. 임진강 유역의 일부인 설마천 시험유역에서의 2005년 연간 유출률은 60.9%로 상기의 값은 매우 타당하다고 할 수 있다. 그리고, 남북한 수문자료의 공유 및 기술적 교류, 유역 전체의 정밀한 수문관측 및 신뢰성 있는 수문자료 생성이 이루어진다면 보다 정확한 유출특성 거동을 분석할 수 있을 것이며, 효과적인 치수 및 이수계획의 수립 등 수자원 개발을 위한 기반을 확보할 수 있을 것이다.수리모형실험과 연계하여 댐 설계에 효율적으로 사용될 수 있을 것으로 전망된다.지는 것으로 평가되었다. 그러나 본 연구결과를 통하여 투수성 포장과 지하수에 관련된 매개변수의 집적과 분석결과는 현장기술 적용 시 매개변수의 유용한 선택과 도시유역의 물 순환 건전화 대안기술 적용에 효과적인 방법론을 제시할 수 있을 것으로 사료된다.첨두홍수량을 저류하기 위해서 상대적으로 넓은 저류면적이 필요한 것으로 나타난다. 대등한 수위감소값의 홍수저감효과를 발휘하기 위해서 본 연구에서는 On-Line 저류지 면적은 Off-Line 저류지에 비 두배 이상이 필요한 것으로 보여졌다.들에 관한 정보는 종종 현장관측에서 조차 무시되는 경우가 많다. 이에 본 연구에서는 수질모형의 매개변수 중 특히 수리특성에 관련된 매개변수들이 수질에 미치는 영향을 파악하는 것을 목적으로 하고 있다. 이를 위해 적용된 수질모형은 QualKo를 사용하였으며, 대상 하천은 낙동강 본류 경남구간 시점 부근인 회천 합류 전부터 낙동강 본류 경남구간 종점 부근인 밀양강 합류 전까지의 경남 오염총량관리 기본계획 시 구축된 모형 매개변수를 바탕으로 분석을 수행하였다. 일차오차분석을 이용하여 수리매개변수와 수질매개변수의 수질항목별 상대적 기여도를 파악해 본 결과, 수리매개변수는 DO, BOD, 유기질소, 유기인 모든 항목에 일정 정도의 상대적 기여도를 가지고 있는 것을 알 수 있었다. 이로부터 수질 모형의 적용 시 수리 매개변수 또한 수질 매개변수의 추정 시와 같이 보다 세심한 주의를 기울여 추정할 필요가 있을 것으로 판단된다.변화와 기흉 발생과의 인과관계를 확인하고 좀 더 구체화하기

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.4
• /
• pp.267-274
• /
• 2011

The environmental impacts of 95% remediation of a total petroleum hydrocarbon-contaminated soil were evaluated using life cycle assessment (LCA). LCA of two remediation systems, soil vapor extraction (SVE) and biopile, were conducted by using imput materials and energy listed in a remedial system standardization report. Life cycle impact assessment (LCIA) results showed that the environmental impacts of SVE were all higher than those of biopile. Prominent four environmental impacts, human toxicity via soil, aquatic ecotoxicity, human toxicity via surface water and human toxicity via air, were apparently found from the LCIA results of the both remedial systems. Human toxicity via soil was the prominent impact of SVE, while aquatic ecotoxicity was the prominent impact of biopile. This study also showed that the operation stage and the activated carbon replacement stage contributed 60% and 36% of the environmental impacts of SVE system, respectively. The major input affecting the environmental impact of SVE was electricity. The operation stage of biopile resulted in the highest contribution to the entire environmental impact. The key input affecting the environmental impact of biopile was also electricity. This study suggested that electricity reduction strategies would be tried in the contaminated-soil remediation sites for archieving less environmental impacts. Remediation of contaminated soil normally takes long time and thus requires a great deal of material and energy. More extensive life cycle researches on remedial systems are required to meet recent national challenges toward carbon dioxide reduction and green growth. Furthermore, systematic information on electricity use of remedial systems should be collected for the reliable assessment of environmental impacts and carbon dioxide emissions during soil remediation.

• Journal of the Society of Disaster Information
• /
• v.16 no.4
• /
• pp.701-711
• /
• 2020

Purpose: In this study, the risk of flammability of a liquid mixture was experimentally confirmed because the purpose of this study was to confirm the increase or decrease of the flammability risk in a mixture of two substances (combustible+combustible) and to present the risk of the mixture. Method: Flash point test method and result processing were tested based on KS M 2010-2008, a tag sealing test method used as a flash point test method for crude oil and petroleum products. The manufacturer of the equipment used in this experiment was Japan's TANAKA. The flash point was measured with a test equipment that satisfies the test standards of KS M 2010 with equipment produced by the company, and LP gas was used as the ignition source and water as the cooling water. In addition, when measuring the flash point, the temperature of the cooling water was tested using cooling water of about 2℃. Results: First of all, in the case of flammable + combustible mixtures, there was little change in flash point if the flash point difference between the two substances was not large, and if the flash point difference between the two substances was low, the flash point tended to increase as the number of substances with high flash point increased. However, in the case of toluene and methanol, the flash point of the mixture was lower than that of the material with a lower flash point. Also, in the case of a paint thinner, it was not easy to predict the flash point of the material because it was composed of a mixture, but as a result of experimental measurement, it was measured between -24℃ and 7℃. Conclusion: The results of this study are to determine the risk of mixtures through experimental studies on flammable mixtures for the purpose of securing the effectiveness of the details of the criteria for determining dangerous goods in the existing dangerous goods safety management method and securing the reliability and reproducibility of the determination of dangerous goods Criteria have been presented, and reference data on experimental criteria for flammable liquids that are regulated in firefighting sites can be provided. In addition, if this study accumulates know-how on differences in test methods, it is expected that it can be used as a basis for research on risk assessment of dangerous goods and as a basis for research on dangerous goods determination.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.1
• /
• pp.1-21
• /
• 2020

The domestic abandoned mines are generating subsidence and it is difficult to predict this subsidence and evaluate the risk. The study of the subsidence risk evaluation using the existing numerical analysis only applies the integrative property to the geological structure and ground condition, and analyzes the goaf peripheral plastic domain. Also, there is a realistic limit that only restricted materials can be apprehended in securing the input information, which leads to the low reliability of the numerical analysis result. In this study, 2-dimensional modeling was performed by applying the field geological structure and ground information targeting abandoned mine where the subsidence occurred. Also, the analysis model was revised by repeating the numerical analysis for the difference between the real subsidence ground information and the analysis result to be minimized by modifying the ground property. This revision was automated by applying the optimization technique and the gradational optimal design method dividing multiple ground properties was developed.