• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.5
• /
• pp.86-93
• /
• 2010

This paper presents the guideline for enhancing the reliability and availability of SAS with IEC 61850 based IEDs in real power system. The IEC 61850 standard communication networks and systems allow utilities to consider new designs for substations applicable both new substation and refurbishments. The existing solutions are based on hardwired interface between the primary substation equipment and the secondary protection, monitoring, control and recording devices. All over the world, lots of projects at different stages of realization have been reported during the last year leading to a rapid maturation of the associated technologies. At present, IEC 61850 is becoming a popular communication standard for the substation automation system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.9B
• /
• pp.1390-1398
• /
• 2010

We present the concept of applying Wireless Mesh Networking (WMN) technology into Smart Grid, which is recently rising as a potential technology in various areas thanks to its advantages such as low installation costs, high scalability, and high flexibility. Smart Grid is an intelligent, next-generation electrical power network that can maximize energy efficiency by monitoring utility information in real-time and controlling the flow of electricity with IT communications technology converged to the existing power grid. WMNs must be designed for Smart Grid communication systems considering not only the high level of reliability, QoS support and mass-data treatment but also the properties of the traditional power grid. In addition, it is essential to design techniques based on international standards to support interoperability and scalability. In this paper, we evaluate the performance of IEEE 802.11s based Smart Grid Mesh Networks by conducting preliminary simulation studies with the ns-3 simulator. We also outline some challenging issues that should be reviewed when considering WMNs as the candidate for Smart Grid communication infrastructure.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.3
• /
• pp.207-215
• /
• 2013

This paper is channel assignment and scheduling techniques for efficient wireless AMI network. In AMI system, the multi-channel cluster network to be proposed defines the communication channel between NC (Network Coordinator) and CDA (Clustered Data Aggregator) as the network channel. CDA and OMD(Out Meter display) and communication channel between SMD(Smart Meter Device) are defined as the group channel. AMI network of the multi-channel cluster based in which the network channel and group channel is mixed increases the administration efficiency through the physical/logical consumer channel clustering. The reliability of inspection data through the channel use distinguished between the adjacent cluster is enhanced. In addition, the fast aggregation of data is possible and the size of a metering network is increased through the channel allocation of the multichannel cluster based.

• Archives of design research
• /
• v.19 no.2 s.64
• /
• pp.5-14
• /
• 2006

Visual perception is ability that analyze visual information about things accepting through eyes in central nervous system. That is, it is ability that recognize and discriminates a visual stimulus, and analyzes by combining such stimulus with previous experience. At today, work which clears visual perception obstacle's cause through visual perception test and grasps all special quality of visual perception obstacle's is used method of treating that improve visual perception obstacle by visual perception training program. Present, visual perception test tools using the paper and pens are used mainly on psychological consultation of welfare facilities and education for the handicapped or occupational therapy, but a lot of problems are discovered in it. Therefore, purpose of this paper is to develop prototype of web-based visual perception test program that can construct to database to solve existing problem, and to design graphic item. As a result, classified measurement pattern that can diagnose visual perception by three, and illustrated development direction of graphic item for examination with this. Also, extracted check list item that should consider for design and construction of visual perception test program and the variable for feasibility study of believability, and presented process for prototype development.

• The KIPS Transactions:PartD
• /
• v.16D no.5
• /
• pp.701-714
• /
• 2009

In the enterprises the data integration based on service requires integrated data management as the change in the environment of enterprises accelerates. Cooperation among enterprises is accomplished through accessing distributed database using business process. As this approach is performed based on the global query, problems such as data heterogeneity, schema heterogeneity, and verification of validity have to be solved in advance for the interoperability among the heterogeneous system. Thus, cooperation requires dynamic and reliable construction. In this paper, we propose XMDR-DSM (eXtended MetaData Registry-Data Service Mediator) system for cooperation. XMDR-DSM, which is comprised of XMDR-DS, XMDR-DQP, and XMDR-DAI, supports the mapping between global schema and local schema and provides data access and integration service. Therefore, XMDR-DSM enables the mutual support of business operations among heterogeneous database. In addition, it can secure information as reusable asset and the standardization of interchange. Also it can manage unified information since it provides business process based on workflow; therefore, it will be able to increase the life span of information and reduce the cost.

• Journal of Convergence for Information Technology
• /
• v.9 no.11
• /
• pp.125-133
• /
• 2019

In this paper, probabilistic flood risk maps were produced for levee break caused by possible flood scenarios. The results of the previous studies were employed for flood stages corresponding to hydrological extreme event quantified uncertainties and then predicted the location of a levee breach. The breach width was estimated by combining empirical equation considered constant width and numerical modeling considered uncertainties on compound geotechnical component. Accordingly, probabilistic breach outflow was computed and probabilistic inundation map was produced by 100 runs of 2D inundation simulation based on reliability analysis. The final probabilistic flood risk map was produced by combining probabilistic inundation map based on flood hazard mapping methodology. The outcomes of the study would be effective in establishing specified emergency actin plan (EAP) and expect to suggest more economical and stable design index.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.633-633
• /
• 2015

재해의 발생 빈도 증가와 불규칙성, 대형화 추세에 따른 SOC 시설물 피해가 증가함에 따라 유관 기관의 재난/재해 정보 수집은 지속적으로 이루어지고 있다. 그러나 각 기관별로 자료가 분산 관리됨에 따라 선제적 재해대응 체계는 갖추어지지 못하고 있는 실정이다. 이에, 예방적 유지관리체계 구현을 위한 분산정보 공유형 재해대응 인벤토리를 구축하고자 한다. 본 인벤토리는 3차원 공간정보를 기반으로 분산 관리되고 있는 재난/재해 관련 정보를 수집하고 이렇게 수집된 데이터들의 통합적 관리를 위해 데이터 표준화를 거쳐 선제적 재해 대응의 원천 데이터로 활용될 수 있다. 본 연구에서는 인벤토리 관리/연계 모듈의 설계 방안을 마련하고자 국내외 인벤토리 관련 시스템 현황조사를 진행하고 관리 및 연계 대상 데이터의 항목을 선정하고 내용을 분류하였다. 또한, 시스템 요구사항을 수집하고 정의하고 관리/연계 모듈의 세부기능 정의를 하였다. 뿐만아니라, 프로토타입 개발을 위해 서비스 제공 형태와 데이터 제공 방식을 결정하였다. 본 연구에서 개발하고 있는 프로토타입은 Web Service 기반의 REST 방식으로 데이터를 제공할 것이며, 3차원 공간 정보를 기반으로 하고 있다. 본 연구에서는 프로토타입 개발을 위해 기본 주재도를 제작하고 연구 지역의 시설물 정보를 구축하였다. 분산정보 공유형 재해대응 인벤토리 시스템은 분산 관리되고 있는 재난/재해 정보들을 자료 송/수신 모듈을 통하여 수집하고 데이터 필터링 모듈에서 수집된 자료의 표준화와 품질측정을 진행하여 데이터의 신뢰도를 향상 시킬 것이다. 또한, 데이터 관리 모듈을 이용하여 공간정보 데이터를 검증하고 최적화 관리를 할 수 있도록 하며, 시스템 관리 모듈에서 유관기관에서 유입되는 자료들을 관리하고자 한다. 이렇게 구축된 인벤토리 시스템은 선제적 재해대응 의사결정의 원천 데이터를 제공하고 SOC 시설물의 유지관리에 활용될 수 있을 것으로 판단된다.

• Convergence Security Journal
• /
• v.18 no.1
• /
• pp.33-42
• /
• 2018

CFD analysis is an analytical technique that applies a computer to the design and development of products across the entire industry for heat or fluid flow. This technology is used to shorten the development period and reduce costs through computerized simulation. However, the software used for CFD analysis is now required to use expensive foreign software. The Opensource CFD analysis software used in the proposed system has reliability of commercial CFD analysis software and has various user groups. However, for users who have expert knowledge, Opensource CFD software which supports only text interface environment, We have developed an environment that enables the construction of a CFD analysis environment for beginners as well as professionals. In addition, the proposed system supports the pre-processing (design and meshing) environment for CFD analysis and the environment for post-processing (result analysis & visualization), enabling the integrated CFD analysis process in one platform.

• Smart Media Journal
• /
• v.12 no.10
• /
• pp.85-92
• /
• 2023

In December 2014, Livestock and Livestock Products Traceability Act was established, allowing consumers to receive livestock traceability information. While the Livestock Traceability System provides consumers with transparent and fair information about their food, it has brought increased workload and penalty burdens to stakeholders in the livestock industry. In this paper, we propose an IoT system for inventory management based on traceability numbers to enable sellers to conveniently provide livestock traceability information to consumers. We analyzed the protocol for managing data from electronic scales and conducted functional testing and verification on mobile devices. Furthermore, we implemented the design and system functionality, taking into account UI/UX on Android OS-based devices to synchronize and interconnect traceability and product information with electronic scales. We anticipate that the proposed approach will minimize user inconvenience and raise production efficiency in the existing market.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.5
• /
• pp.38-48
• /
• 2007

In ubiquitous environment, sensor networks that sense and transmit surrounding data without human intervention will become more important. If sensors are installed for detecting vehicles and measuring their speed in the road and that real-time information is given to drivers, it will be very effective for enhancing safety and controlling traffic in the road. In this paper, we proposed a new reliable and real-time sensor MAC protocol between AP and sensor nodes in order to provide real-time traffic flow information based on ubiquitous sensor networks. The proposed MAC allocates one TDMA slot for each sensor node on the IEEE 802.15.4 based channel structure, introduces relayed communication for distant sensors, and adopts a frame structure that supports retransmission for the case of errors. In addition, the proposed MAC synchronizes with AP by using beacon and adopts a hybrid tracking mode that supports economic power consumption according to various traffic situations, We implemented a simulator for the proposed MAC by using sim++ and evaluated various performances. The simulation results show that the proposed MAC reduces the power consumption and reveals excellent performance in real-time application systems.