• Journal of KIISE:Software and Applications
• /
• v.41 no.7
• /
• pp.469-480
• /
• 2014

Software Product Line (SPL) is a software development paradigm that guarantees high productivity, reduced cost, and shorter time-to-market by systematically planning and reusing commonality and variability. In order to maximize the benefits of SPL engineering, testing should be integrated into the SPL engineering lifecycle processes that consist of domain engineering and application engineering and should be performed with as little test efforts as possible. This paper proposes a systematic software product line test cases derivation method using combinatorial test design. By applying combinatorial test design to product line test cases derivation and exploiting commonality between products at the same time, the number of generated test cases is dramatically reduced with the result that they can be effectively reused by the products of the given product line. Case studies conducted in this paper show the efficacy of our method compared with other methods that use only commonality or combinatorial design or neither of them in terms of the number of derived test cases.

• Fire Science and Engineering
• /
• v.25 no.5
• /
• pp.1-7
• /
• 2011

In this study, standards and test methods for building materials of domestic and foreign countries were compared and analyzed to propose evaluation methods for the fire-retardant performance of HANOK components (Traditional house). IBC and NFPA codes recently have been adopted in the US, and the properties such as critical heat flux, fire spread index and smoke density are being used as an evaluation reference. In Europe, the unified Euroclass has been adopted and the surface flammability, prototype fire test or cone calorimeter test are conducted for the performance test. Japan has the similar system as Korea where the class is classified into 3 grades. We tried to study a quantitative evaluation method of fire retardant performance for the HANOK components based on the analysis results of the several countries' standards and test methods for building materials.

• Nuclear Engineering and Technology
• /
• v.27 no.4
• /
• pp.603-618
• /
• 1995

원자력 발전소 및 동위원소 사용기관에서 발생되는 가연성 고체 폐기물 및 유기폐액의 소각기술의 활용에 있어서 이의 안전성 확보를 위한 기술적 기준의 설정을 위한 고려인자들을 조사하였다. 국내외의 소각기술 활용현황을 알아보았고 본 기술의 국내 도입시 필요한 기술적 안전지침에 관한 외국의 사례를 조사하고 국내 관련 규정도 검토, 비교, 분석하여 주요 고려항목을 도출하였다. 안전성 확보를 위한 고려 항목을 크게 일반산업시설 적용항목, 원자력시설 상 안전조건, 소각시설의 기술적 요구사항, 기타 제반사항으로 나누어 제시할 수 있었다. 이들 내용은 기존 원자력 및 환경시설에 적용되는 안전성분석보고서 및 환경영향평가서로 작성될 수 있다고 보았으며 시설의 개요, 시설의 기술적 사항과 이에 따르는 안전을 위한 조건, 폐기물의 인수조건 등이 포함되며 기존 관련 법규의 적용 및 확인이 필요하였다. 기술적 사항에는 공정의 제염계수, 연소효율, 소각재의 형상, 배기가스의 방출농도, 작업자 및 인근주민의 피폭등이 확인되어야 하며 소각재의 처리방법 및 조건이 제시되어야 하고 소각재의 침출특성 등이 주요한 인자라고 보았다. 아울러 소각대상폐기물의 인수조건이 명시되어 소각성능에 따른 이의 안전성이 입증되어야 한다. 따라서 인허가 후 건설된 시설에서의 사용전 시험소각절차의 제시 및 이에 대한 관련 규제기관의 검사제도가 있어야 하며 품질보증절차 역시 관련지침에 따라 실시되어야 한다. 이와 같은 내용을 포함하는 안전기술지침의 설정이 절대적으로 필요하며 본 연구조사 결과의 활용이 기대된다.

• Journal of Software Engineering Society
• /
• v.29 no.2
• /
• pp.1-6
• /
• 2020

Software product line development is a development paradigm that efficiently develops a product family by avoiding redundant development based on separation of the common part and the variable part of the product family. In software product line development, the source code that is used to produce a product family is called a product line code base, and when the product line code base is changed and the products of the product family are affected by the change, the activity of testing the affected products is called a product line regression testing. For product line regression testing, instead of conducting regression testing individually on each product of the product family, a more efficient regression testing would be possible if unnecessary testing that are irrelevant to the change can be avoided. This paper introduces SRTS, which is an automated method to efficiently perform software product line regression testing. SRTS divides the product line code base and test cases based on commonality and variability. Then SRTS identifies and selects the test cases affected by the change. Finally, it reduces unnecessary testing by rerunning only the selected test cases.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.1
• /
• pp.9-15
• /
• 2018

Radon gas, which is present on the earth, is a primary carcinogen released from rocks, soil, building materials, etc., and exists as a unique gas phase. In order to solve the risk of radon gas, we evaluated the basic performance which can be used as indoor finishing materials in addition to the radon gas reduction properties of the matrix using anthracite. An anthracite used as a conventional filter material was used to produce a matrix, and a test was conducted to replace the gypsum board, which is one of the building materials used in the existing room. As the anthracite replacement ratio increases, flexural failure load strength increases and thermal conductivity tends to decrease. Depending on the thickness of the board, the reduction performance of radon gas shows a slight difference.

• Journal of the Korean Geosynthetics Society
• /
• v.17 no.1
• /
• pp.1-10
• /
• 2018

We conducted research to develop a solidification agent for the ground surface reinforcement method in which activator is fused by recycling pig iron slag, which is a byproduct generated in the steel making process. The purpose of this research is to solve the problems of surface soil by improving the strength and durability of foundation soil such as soil loss, settlement, sinkhole, etc. by recycling pig iron slag from disused or landfilled steelworks. For this purpose, the possibility of using pig iron slag as a solidification soil was evaluated by the compressive strength, elution test of harmful materials, permeability coefficient test. As a result of the compressive strength test, the values of the strength of the curing 28 days of the solidified soil having the solidification agent mixing ratio of 12% were found to be 0.93, 0.96 and 1.3 MPa, respectively, satisfying the required strength value of 1 MPa, In the case of permeability coefficients, the minimum values were $4.1{\times}10^{-8}$, $7.0{\times}10^{-7}$, and $1.7{\times}10^{-7}cm/sec$, respectively, at the solidification agent mixing rate of 12%. In addition, as a result of the elution test of harmful materials, a small amount was detected in the item of hexavalent chromium but satisfied the inclusion criteria, and in the remaining items, heavy metals were not eluted.

• Analytical Science and Technology
• /
• v.19 no.2
• /
• pp.172-180
• /
• 2006

This study was performed to establish new methods for hazardous substances and to develop an analytical method in specified wastes for preventing the environmental pollution caused by hazardous wastes. Therefore, the trends of international management, regulatory criteria, and items of hazardous wastes in various countries were investigated. Based on this study, target priority of new hazardous substances in specified wastes was established. An analytical method was developed using the waste standard reference materials of sludge, oil, bottom ash, etc., which contain the new hazardous substances (Ba, Be, Cr(VI), F, Ni, Sb, Se, and V). A total of 37 waste samples from the representative facilities, which are emitting new hazardous substances, were analyzed.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.5
• /
• pp.537-546
• /
• 2023

For the purpose of fire delineation within buildings, steel walls in Korea are mandated to undergo rigorous certification as fire-resistant entities, substantiated via a series of qualitative assessments. Predominantly, these evaluations comprise the fire resistance test paired with supplementary examinations; specifically for steel walls, these encompass the gas hazard and panel bending strength tests. Given the prevalence of semi-noncombustible core materials, gas hazard tests are largely rendered superfluous, pivoting the focus solely onto the panel bending strength test during the certification trajectory. This particular test is designed to gauge the flexural robustness of individual wall panels. An enhanced bending strength is postulated to fortify both the structural integrity and thermal insulation of the wall by mitigating potential deformations. In this scholarly exploration, an analytical deep dive was undertaken into extant, valid certification test datasets. The endeavor aimed to ascertain the depth of correlation between the designated fire resistance metric and the bending strength, the latter being the sole supplementary assessment for steel walls. In distilling the findings, it was discerned that temperature elevations beyond baseline values exhibited no statistically salient linkage with the panel's bending strength.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.10
• /
• pp.574-579
• /
• 2016

This study assessed feasibility of making granular fertilizer with fly ash from a sewage sludge incinerator in Korea. Composition, characteristics, strength, and heavy metal contents of the granular fertilizers were investigated. Due to its high contents of phosphorus, fly ash from a sewage sludge incinerator could be used to make fertilizers. Granulation rates (2-4 mm granules) over 80% could be achieved as the fly ash contents were 15% or less of the fertilizer. Leaching tests of the fertilizers, based upon the Korean Standard Methods for Solid Wastes, showed the concentrations of heavy metals less than the risk limits. However, contents analysis of the fertilizers, based upon the Korean Standard Methods for Soils, experienced higher levels of heavy metals than the risk limits as the fly ash content exceeded 7% of the fertilizer. Thus, the fly ash needs to be added less than 7% of the fertilizer if there is no pretreatment to remove heavy metals.

• Economic and Environmental Geology
• /
• v.51 no.5
• /
• pp.429-438
• /
• 2018

Since concrete is a hardened aggregates of various materials, it needs to be crushed for chemical analyses. However, the effect of sample crushing on the analytical results has not been precisely assessed till today. In this study, we prepared concrete test pieces using Portand cements and fly ashes as binding materials, and ponded ashes and sands as aggregates and analyzed the heavy metals of the test pieces using Standards for Fair Testing of Soil Contamination (SFTSC) and Wastes (SFTW). For this, each test piece was partially crushed at first and sieved for separation of grains of <0.15 mm, 0.15-0.5 mm, and 0.5-5 mm from the same crushed samples (Crushing Method I). Results of those samples using SFTSC showed a clear trend that analyzed heavy metal concentrations are higher in the finer fractions. Particularly, fractions with <0.15 mm indicated much higher concentrations than the theoretical ones, which were calculated based on the concentrations of individual materials and their mixing fractions. In contrast, the analytical results were generally comparable with the theoretical ones when the test pieces were totally pulverized such that all the crushed grains were <0.15 mm in size (Crushing Method II). These results are associated with the fact that cement materials and fly ashes, which are high in heavy metals relative to other materials, are enriched in the fine fractions. The analytical results using the SFTW derived very low concentrations in most of parameters and did not indicate the dependence of concentrations on the crushing methods due to using distilled water as leaching agent.