• 소음진동
• /
• 제7권6호
• /
• pp.1025-1030
• /
• 1997

This paper introduces the experimental results of ride values assessed for several passenger cars. The experiment was conducted at four vehicles on two roads for three persons by measuring the acceleration in the 12-axis of human. The results include the comparison of the ride values, such as the component ride values, overall ride value, and seat effective amplitude transmissibiity. It is proved that acceleration between 1 and 15Hz is the most significant in evaluating the ride quality. The contribution of the acceleration in each measurement axis is quantified from the component ride value. SEAT value shows a relatively low sensitivity for the road condition and human mass.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.675-679
• /
• 2006

Today, the interior noise perceived by the occupants is an important factor in the design of automotive interior assemblies. Buzz, Squeak and Rattle Noises in a Seats are one of the major concerns mentioned above. In this study, the terms 'Buzz, squeak and rattle' were defined as the noise originating from structural vibrations in an assembly. And, the BSR noise of vehicle seat was investigated and the improvement of BSR noise level was confirmed though the structural treatment based on the structural analysis results from the modal and sound intensity of seat.

• 한국자동차공학회논문집
• /
• 제5권4호
• /
• pp.110-120
• /
• 1997

One of the most important factor for the comfort of the passenger vehicles is the minimization of the compressible transmissibility during the running vehicles. Seat foam materials of I2 series(index 95 and the contents of isocyanate TDI was changed in percentages 75, 70, 65, 60, 50, 40) and DI series(density 50kg/$\textrm{m}^3$, index was changed 100, 95, 90) showed the significant differences in their transmissibility depended upon their chemical constitution such as index and contents of isocyanate TDI. The minimum trasmissibility of seat foam materials of I2 series was found from the materials with the contents of 65% isocyanate TDI and the index 95 at the frequency 4.79~5.31Hz. Also the minimum transmissibility of seat foam materials of DI series was found from the materials with the index 90 and the density of 50kg/$\textrm{m}^3$ at the frequency of 4.79~5.31Hz.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1437-1443
• /
• 2000

왕복동식 압축기에서 고효율 토출밸브를 개발하였다. 멈치개(stopper)가 있는 외팔보 형태의 토출 밸브는 밸브 및 멈치개의 형상과, 밸브와 멈치개 및 밸브시트에 존재하는 오일에 의한 점성력(sticky force) 등에 의한 밸브의 개폐과정과 동적 거동특성의 변화를 유발한다. 본 논문에서는 오일막에 의한 점성력을 측정하고, 그에 의하여 유발되는 지연시간(time-lag)을 측정할 수 있는 실험장치를 개발하였다. 또한, 토출밸브의 개폐과정을 최적화하여, 과압축 손실을 최소화한 토출밸브계를 개발하였다. 개발된 밸브계에 대하여 실험적인 방법으로 그 효과를 검증하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1723-1728
• /
• 2000

This paper deals experimentally with the effect of the sound-damping sheet on building wall system; brick wall, light wall panel, and gypsum board. Experimental results show that when the sound-damping sheet is attached on wall systems, the mass and/or damping effects result in increasing of STL of wall system depending on the characteristics of the original partition. It is pointed out that the performances of sound damping sheets must be presented with specific wall structures that applied, not by the sound transmission loss of the sheet itself.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 춘계학술대회 논문집
• /
• pp.425-426
• /
• 2010

Recently, Most of diverse noise of vehicles has decreased competitively according to development of the automotive manufacturing technology. Especially, Passenger car manufacturers has been conducting buzz, squeak and rattle(BSR) noise test as a method of the noise evaluation tests to reduce an unpleasant sound from interior parts on the driving the car. This paper suggest a evaluation method for detecting position of noise source from measured noise signals of vehicle seats during random excitation BSR test. Hereby the BSR test procedure used the test regulation of 'G' company. The detection of noise source positions used the Sound image equipment. Through suggested the test method on this paper, an accurate analysis of noise source occurred in the BSR test will be possible.

• 한국정밀공학회지
• /
• 제17권9호
• /
• pp.109-121
• /
• 2000

A simplified modeling approach of free vibration for occupied car seats was demonstrated to be feasible. The model consisting of interconnected masses springs and dampers was initially broken down into subsystems and experiments conducted to determine approximate values for model parameters. Which were each stiffness and damping value. Nonlinear equations of motion were derived and model parameters obtained in experiments were applied to these equations. A mathematical model of free vibration for car seat and mannequin system was built with 7 degrees of freedom. in order to calculate natural frequencies and the corresponding mode shapes. linear equations of motion were obtained through linearization. In order to explore the effects of each model parameter free vibration analysis were preformed.

• 한국정밀공학회지
• /
• 제17권9호
• /
• pp.122-132
• /
• 2000

A simplified modeling approach of forced vibration for occupied car seats was demonstrated by using a mathematical model presented in 'Free Vibration of Car seat and Mannequin System' nonlinear and linear equations of motions were rederived for forced vibration and the transfer function was used to calculate the frequency response function. The experimental apparatus were set up and hydraulic shaker was used to obtain the system responses. Through the tests mannequin's head had a lot of problems and the responses with a head and without a head were measured. To explore the effects of linear dampings and friction moments at the joints linear analyses were performed. New sets of linear spring and damping coefficients and torsional dampings at the joints were calculated through parameter study to match up with experimental results. Good agreement between experimental and simulation frequency response estimates were obtained both in terms of locations of resonances and system deflection shapes at resonance indicating that this is a feasible method of modeling seated occupants.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.409-414
• /
• 2011

The drivers of commercial vehicle easily feel tired because of a long time driving and bad road condition. Therefore it is very important to make the driver seat comfortable. This paper introduces the suspension system of driver's seat using magnetic force. The combination of linear spring and magnetic force can make nonlinear spring which has optimal stiffness for minimal vibration transmissibility. The vibrations of driver's seat floor are measured in various road condition. And the numerical simulations and experiments are performed to define the optimal parameter of magnetic suspension system.

• 한국생산제조학회지
• /
• 제7권3호
• /
• pp.7-13
• /
• 1998

This paper presents a new concept of a commercial vehicle seat suspension system. The proposed suspension system features an ER(electro-rheological)damper which can produce continuously tunable damping forces by control elecric fields. A dynamic model of the ER damper is first achieved by incorporating Bingham property of the ER fluid, followed by the formulation of governing equations of motion for the suspension system The effectiveness of the proposed ER seat suspension system is evaluated by investigating vibration with respect to sinusoidal inputs.