• Journal of Korea Entertainment Industry Association
• /
• v.14 no.7
• /
• pp.227-237
• /
• 2020

In the 30th edition of , Chunhyang is conventionally presented as a woman who tries to protect her chastity and it eventually bears the fruits of her love. On the other hand in , Chunhyang is reinterpreted as a woman who strives to protect feminist self-consciousness and beliefs, even in unreasonable social situations. By comparing the two different works, we can see differences in the behavior of the characters in how to overcome various obstacles, such as irregularity, gender discrimination, and identity conflict. By reinterpreting the emotions of the characters in the classic novel into the emotions of the modern characters, we can see the how the characters grow when trying to overcome the situation and find a solution, even though there is no change yet. This can be seen as the emotions of the characters become different as time goes by. As the times go by, the world's values and inclinations also change, and the irrationalities of the world will also go in various directions. Through the fusion of culture into history, even though it's irrational but we become familiar with it and will clearly understand the absurdities, and we can look forward to changes in the process.

• Research in Plant Disease
• /
• v.28 no.2
• /
• pp.61-68
• /
• 2022

Powdery mildew and two-spotted spider mite are detrimental to strawberry plants and are controlled with traditional pesticides. To accommodate consumer demand, eco-friendly methods of pest control are required. Strawberries were cultivated (in soil and in a hydroponic system) for two years, and ultraviolet B (UV-B) irradiation was used as an alternative pest control during the harvesting season. Three varieties were grown (Seolhyang, Kingsberry, and Durihyang), and four UV-B lamp/mulch (black, green, and light reflection sheet [LRS]) combinations were used during harvesting: UV-B+black or green mulch, UV-B+black or green+LRS, no UV-B+black or green, and no UV-B+black or green+LRS. In all varieties, powdery mildew was 65% more controlled when UV-B irradiation was used. The adult two-spotted spider mite density was lowest in the UV-B lamp+black or green+LRS treatments. Therefore, UV-B irradiation during the strawberry harvesting season could effectively control powdery mildew and two-spotted spider mite with little side effect on the plants.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.3
• /
• pp.130-137
• /
• 2023

Smart farms, which have been receiving attention as a solution to recent rural problems, refer to technologies that optimize the growing environment of crops and increase the productivity and quality of crops through efficient management. If the relationships between environmental data in smart farms are analyzed, additional productivity enhancement and crop management will be possible. In this paper, we propose a method for acquiring and analyzing nine environmental data, including temperature, humidity, CO2, soil temperature, soil moisture, insolation, soil EC, EC, and pH. Data acquisition is done through RS-485 communication between the main board and the sensor board and stored in the database after acquisition. The stored data is downloaded in Excel sheet format and analyzed through histograms, data charts, and correlation heatmaps. First, we analyze the distribution of total, day, and night data through histogram analysis, and identifiy the average, median, minimum, and maximum values by month through data chart analysis separating day and night to see how the data changes by month. Finally, we analyze the correlation of the data through a correlation heatmap analysis separating day and night. The results show a very strong positive correlation between temperature and soil temperature and soil EC and EC during the day, and a very strong positive correlation between temperature and soil temperature and soil EC and EC at night, and a strong negative correlation between temperature and soil EC.

• Journal of Internet of Things and Convergence
• /
• v.9 no.3
• /
• pp.27-33
• /
• 2023

In this study, it was analyzed with the dyeing pattern of Diospyros kaki Thunb (persimmon) and was tried to numerically evaluate how the dyeing pattern in silk fabrics and cells was changed by different mordants. When the dyed silk fabrics were sufficiently dried, the silk fabrics were found to have a pale yellow color. Interestingly, iron II sulfate mordant changed the color change the most, silk fabrics were dyed with a color close to brown or dark purple. For numerical analysis, 19% and 62.5% color changes could be induced by sodium tartrate plus citric acid and copper acetate, respectively. Iron II sulfate induced the greatest difference than that of untreated mordants at 88%. About 5% and 10% of Chinese hamster ovary (CHO) cells were stained by sodium tartrate plus citric acid and copper acetate, respectively. The staining effect induced by iron II sulfate was about 2.4 times higher than the staining effect by sodium tartrate plus citric acid. In previous studies, staining results have been visually confirmed. However, this results not only visually confirmed the dyeing, but also quantified the color change. In particular, if numerical results are continuously integrated into big data, any researcher will be able to easily obtain similar results even if the method, time, volume, etc. are changed. In addition, the numerical data of this study is considered to be an important basis for building a database for IoT construction and computer analysis.

• Korean Journal of Hazardous Materials
• /
• v.2 no.1
• /
• pp.18-26
• /
• 2014

We analyzed the demand of competent authorities requiring adequate technical information for initial investigation of chemical accidents. Reflecting technical reports on chemical accident response by environmental agencies in the U.S. and Canada, we presented information on environmental diffusion and toxic effects available for the first chemical accident response. Hydrogen fluoride may have the risk potential to corrode metals and cause serious burns and eye damages. In case of inhalation or intake, it could have severe health effects. The substance itself is inflammable, but once heated, it decomposes producing corrosive and toxic fume. In case of contact with water, it can produce toxic, corrosive, flammable or explosive gases and its solution, a strong acid, may react fiercely with a base. In case of hydrogen fluoride leak, the preventive measures are to decrease steam generation in exposed sites, prevent the transfer of vapor cloud and promptly respond using inflammable substances including calcium carbonate, sodium bicarbonate, ground limestone, dried soil, dry sand, vermiculite, fly ash and powder cement. The method for fire fighting is to suppress fire with manless hose stanchions or monitor nozzles by wearing the whole body protective clothing equipped with over-pressure self-contained breathing apparatus from distance. In case of transport accident accompanied with fire, evacuation distance is 1,600m radius. In cae of fire, fire suppression needs to be performed using dry chemicals, CO₂, water spray, water fog, and alcohol-resistance foam, etc. The major symptoms by exposure route are dyspnoea, bronchitis, chemical pneumonia and pulmonary edema for respiration, skin laceration, dermatitis, burn, frostbite and erythema for eyes, and nausea, diarrhea, stomachache, and tissue destruction for digestive organs. In atmosphere, its persistency is low, and its bioaccumulation in aquatic organism is also low.

• Clean Technology
• /
• v.29 no.4
• /
• pp.237-243
• /
• 2023

Aerogel is the most excellent insulation material known to date, but it is inflexible and has very low strength. A blanket containing aerogel in a nonwoven fabric or fiber is currently the most practical form. However, aerogel blankets are not yet widely used because they cannot avoid dust generation when handled, lack flexibility, and can possibly deform. In this study, vacuum treatment, surface treatment, and composite materialization technology were applied to solve this problem, and some prototypes were also made. If an aerogel blanket is wrapped in an aluminum sheet, sealed at the four ends, and vacuumed, it can become a material with better insulation than the blanket itself. An aerogel molded body can be made by coating the aerogel blanket with resin and treating the surface. If the aerogel blanket is multi-packed and laminated with resin or fiber in multiple layers to make it a composite material, it can be used as a flexible insulation material. In particular, this composite material, which utilizes a Teflon membrane with controlled pores, is breathable and waterproof, so it can be used for clothing. Prototypes of insoles for winter boots and outdoor roll mats were also produced using aerogel blanket resin and fiber composites. These prototypes showed low thermal conductivity of less than 20 mW m^-1K^-1, with good flexibility and durability.

• Journal of the Economic Geographical Society of Korea
• /
• v.27 no.1
• /
• pp.18-37
• /
• 2024

This study examines migrant workers' occupational health and safety issues through a case study of the UK construction industry, focusing on structural vulnerabilities. Migrant workers are at the bottom of the hierarchically fragmented labour market, performing outsourced hazardous work. Structural vulnerability focuses on the social structures that create hierarchies and increase risk in the workplace, rather than on individual responsibility or 'cultural' differences of migrant workers. The study considers the structural factors that perpetuate the migrantisation of risk in the UK construction industry, focusing on the structural necessity of low-wage migrant labour, precarious employment and the legal status of migrant workers, and discusses how these three factors interact to increase migrant workers' vulnerability to health and safety. The migrantisation of risk is not only a matter of occupational health and safety or universal workers' compensation, but also of the intertwining of labour migration policies with employment structures that rely on low-wage, low-skilled labour. This calls for proactive measures to address structural risks that go beyond passive declaratory policies that do not exclude migrant workers from education, training or legal systems.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.3
• /
• pp.7-11
• /
• 2024

The bedsore prevention cushion serves to prevent the skin on the buttocks of a wheelchair user from being damaged through friction with the wheelchair seat. This is because it absorbs some of the weight applied to the wheelchair seat and allows the weight to be applied evenly to the entire contact surface. For the impact test, which is part of the performance testing of bedsore prevention cushions, a hip model that represents the sitting posture of a wheelchair user is required. In this study, a hip model was manufactured for impact testing of bedsore prevention cushions for wheelchairs. Performance tests for pressure bedsore prevention cushions for wheelchairs include KSP 0236, a Korean standard, and KS P ISO 16840-2, an ISO international standard. The hip model proposed in KS P ISO 16840-2 was more suitable for impact testing of bedsore prevention cushions for wheelchairs. However, the guidelines for making hip models proposed by international standards need to be modified to reflect the advancement of model making technology and use easier methods. We propose a new hip model production method that produces a hip model out of plastic all at once and additionally attaches SS-41 steel plates processed into the shape of the hip to make the mass of the model similar to the human body.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.1
• /
• pp.60-71
• /
• 2024

The present study aims to investigate the level difference of floor impact noises of composite floor structure using EVA resilient materials. In order to this, four different types of resilient materials were designed combining PET, PP sheet and EVA mount including Flat type, Deck type, Cavity type and Mount type. Totally 9 different samples were made for acoustic measurements which were carried out twice with bang-machine and impact ball as the heavy-weight floor impact noise sources. All the floor impact noise measurements were undertaken at the authentication institution. As a result, concerning Flat and Cavity types, it was found that 2 dB ~ 5 dB of heavy-weight floor impact noise was reduced supplementally when PET was added, while floor impact noise larger than 50 dB was acquired when single resilient material was used. Especially, most high performance was obtained for Mount type with 1st grade of light-weight floor impact noise and 2nd grade of heavy-weight floor impact noise. This is because of material property with low dense PET sound absorption materials which fill all around EVA mounts. Also, it was considered that this results are due to the sound impact absorption by the both EVA mounts and the air cavity between EVA mount and PP sheet. Also, it was found that at least 36 EVA mounts per 1m2 area of resilient panel make more noise reduction of heavy-weight floor impact noises.

• Journal of Animal Science and Technology
• /
• v.49 no.5
• /
• pp.611-620
• /
• 2007

The current study was designed to define whether a blend of prunus mume extract(25%) containing lactic acid(75%) and grape seed extract(10ppm) could affect in vitro antimicrobial activity and growth performance, intestinal microflora, plasma biochemical profiles and digestive enzymes activities in broiler chickens. In paper disc agar diffusion test, we clearly observed antimicrobial activity against E. coli in response to prunus mume extract or a blend of prunus mume extract. For in vivo test, a total of ninety six 3-d-old male broiler chicks were assigned to basal diet(CON), basal diet supplemented with antibiotics (ANTI) and 0.5% a blend of prunus mume extract(PRNUS) until 35 days of age. Throughout the entire experimental period(3-35 days), there were no differences in BW and FCR between the birds fed the basal diet with antibiotics and the diet supplemented with a blend of prunus mume. However, ANTI group showed a significant increase in BW and total gain compared to CON group. The weights of digestive organs such as the pancreas and mucosal tissues were not affected by dietary treatments. There was no difference in plasma levels of glucose, cholesterol, AST and ALT activity. However, triglyceride in plasma increased(P<0.05) in the birds fed the diet supplemented with 0.5% a blend of prunus mume extract compared to those fed antibiotics supplemented diet. The activities of pancreatic trypsin and amylase, and intestinal hydrolase including disaccharidase were not affected by dietary treatment. The colony forming units(CFU) of lactobacillus in the lower ileal-cecum of the birds fed the diet supplemented with a blend of prunus mume extract was significantly(P<0.05) higher than that of birds fed antibiotic supplemented diet without affecting the CFU of E. coli. In conclusion, the birds fed the diet supplemented a blend of prunus mume as an alternative to antibiotics showed a similar growth performance and an significant increase in lactobacillus population compared with the birds fed basal and antibiotics supplemented diets.