• Korean Journal of Optics and Photonics
• /
• v.20 no.6
• /
• pp.328-333
• /
• 2009

We proposed a three-dimensional holographic display technique without twin image noise by converting a complex hologram to an off-axis hologram. To implement the proposed technique we record the complex hologram of a three dimensional object that is composed of two slides located with different depth locations. We added spatial carrier to the complex hologram and after that, extract the real part of the spatial-carrier-added hologram. This converts the complex hologram to an off-axis hologram. We also reconstruct the off-axis hologram using a spatial light modulator for three dimensional display.

• Korean Journal of Optics and Photonics
• /
• v.31 no.6
• /
• pp.314-320
• /
• 2020

The optics used in an infrared imaging system has a strong refractive-index change according to temperature, so an autofocus control function is essential for a military infrared imaging system with a wide operating-temperature range. In this study, we design a triple-magnification infrared imaging system, and to compensate for the change in refractive index according to temperature we measure the change in the lens focus according to temperature. The autofocus control function was implemented by using the measured movement amount, and we could obtain an image with satisfactory resolution performance over a wide range of operating temperatures.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.12
• /
• pp.987-995
• /
• 2020

Accurate alignment between high-performance payloads and attitude control sensors is essential factor to guarantee accurate attitude orientation and high pointing stability of the satellite. Space craft developers often use theodolite measurement system for satellite alignment during ground AIT(Assembly Integration and Test) phase. When measuring theodolite, errors may occur due to line of sight error, tilting axis error, vertical index error, and vertical axis error. In addition, errors that can occur during alignment measurements with multiple theodolites are analyzed through the alignment cube measurements test. Based on the alignment cube measurements test, a technical method that can improve the alignment measurement accuracy was suggested and it's measurements results satisfied the satellite design requirements.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.3
• /
• pp.97-106
• /
• 2015

In this paper, the development of infrared threat surrogate system is described and it can be used to verify the performance of DIRCM system. In this research, threat surrogates are manufactured using same F# and reflective optics used in 1st- and 2nd-Gen. real seeker so that the threat surrogate system can be used to develop code-based jamming techniques. Also the threat surrogate system can analyze the saturation jamming effect for image seeker using FPA detector. The result shows that 1st- and 2nd-generation threat surrogates have relatively precise tracking performance and jamming effect.

• Korean Journal of Cognitive Science
• /
• v.4 no.2
• /
• pp.201-262
• /
• 1994

This paper portrays software reuse as analogical mapping and rule development.In order to explore the impacts of inconsistent representationS on the cognitive process of software resuse,it manipulates the intermal representations of source and target problems and their program solutions.The experimental design for this study has two factors:1)the degree of structural consistency between the source problem and the target problem,and2) the degree of structural consistency between the source problem and the source solution.A full-scale protocol analysis reveals that these two factors influence the cognitive process of mapping between source and target,the process of developing rules,and the interrelation between analogical mapping and rule development.The paper concludes by discussing the implications of these results for software reuse.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.15 no.1
• /
• pp.9-20
• /
• 1997

The precise leveling is one of the important means of investigating fluctuation of earth's crust and foreknowing earthquake. This paper aims to study refraction errors developed in the inclined leveling route. Based on Kukkamaki's theory and data of weather, the author devised an experiment to test how Kukkimaki's corrections improved the discrepancy between fore and back sight leveling in actual slope. Additionally, through the repeated observation between fore and back sight leveling at one fixed station in the slope(2/100-4/100) and the experimental tests of continuous inclined leveling route, the author studied the effects and charcteristics of refraction. Especially, in inclined leveling(2/100-4/100), the distance of line of sight is ideally to be 25-30 m to minimize refraction errors. From the results of experimental tests of continuous inclined leveling route, the values of calculation by Kukkimaki's corrections were found to be nearly in accord with the values of observation.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.9 no.3
• /
• pp.229-240
• /
• 2007

The 3D absolute displacement monitoring system has been developed to analyze the tunnel convergence measured under construction of underground structures and to manage effectively the measured data. The system is comprised of the total station, the anchor-typed target pin and the 3D absolute displacement measurement and management program. In this paper, the types and specifications of the 3D total station were presented. The anchor-typed target pin, an improved model of traditional one, was developed and its sightable distance and measurement accuracy were checked by field tests. Also a 3D absolute displacement measurement and management program, TEMS 3D, was developed to provide some analysis tools including the trend and influence lines. L/C ratio, S/C ratio and the like. The developed system was applied the construction stage of a railway tunnel for testing purpose. It is verified that the developed system is capable of predicting weak zones ahead of tunnel face by comparing with results of TSP (Tunnel Seismic Prediction) survey.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.19 no.4
• /
• pp.317-325
• /
• 2001

Although GPS has proven to be efficient in the fields of navigation and surveying, it has many problems of positioning in downtown areas. Therefore, if GPS is combined with GLONASS which is similar to GPS in its positioning and signal system, it is expected that accuracy will be improved. However, we should address certain problems that exist related to the coordinate, time, and signal system between the two. The purpose of this study is to develop a GPS/GLONASS combination program by considering the properties of GPS and GLONASS and to solve the problems related to differences in the coordinates system and signal system. It is also to present the efficiency of the program in navigation and geographic information through analyzing 3D positioning accuracy by GPS/GLONASS combination with an application experiment. As a result of this study, the accuracy of the DGPS/DGLONASS positioning program corresponded to that of commercial program, and that's accuracy was better than that of DGPS. Especially, the acquisition of navigation and geographic information was possible by DGPS/DGLONASS combination in downtown area where the continuous 3D positioning is impossible by DGPS only.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.6
• /
• pp.146-152
• /
• 2009

The steel-tube is exposed to a radiation from X-ray source. The transmitted radiation is detected by a detector, usually film or more recently an imaging plate(IP) of Computed Radiography(CR). The detected radiation overlaps the region of both sides of the object. The radiographic images reflect the projections of the rays, passing twice through both external and internal tube material. Nonlinear distortion due to the radioactive transmission and geometric disposition also appears on images. In this paper, an analytical approach is presented to achieve image reconstruction from the steel-tube CR images. Parameters related to radiation and measuring structure, such as intensities, absorption in material and geometric specifications linked with the collimating components, are calculated and identified in order to construct the renoval images for twofold regions of circle-type steel tubes. A correction procedure for region recovery most similar to the true tube is designed. The application of this approach on CR images is shown and reconstructed results are discussed.

• Korean Journal of Optics and Photonics
• /
• v.16 no.1
• /
• pp.50-55
• /
• 2005

A method for measuring the wavefront error and the modulation transfer function(MTF) of large aperture optics using an unequal path interferometer is presented. A bidirectional shearing interferometer is used for collimation testing of the measurement system. A large aperture Fizeau interferometer with long optical path difference measures the wavefront error of the optics under test by using a $\Phi$ 400 mm off-axis parabolic mirror. The MTF is also measured at the wavelength of the interferometer by changing the laser light into partially incoherent light. Test results of a $\Phi$ 300 mm Cassegrain type satellite telescope made in Korea are presented.