• Journal of Radiation Protection and Research
• /
• v.21 no.2
• /
• pp.139-143
• /
• 1996

A multi-wire proportional counter with large sensitive area was designed and constructed considering diameter of anode wire. its material and space. A preamplifier connecting detector to main amplifier or counter was also designed and constructed for measurement output pulse from multi-wire proportional counter. The preamplifier was composed of charge-sensitive differential circuit. clipping circuit and amplification circuit. To test the performance of this equipment, terminal output pulse from the preamplifier was measured and compared with noise For these tests $^{239}Pu(360 Bq)\;and\; ^{90}Sr/^{90}Y(250 Bq)$ were used as radiation sources. The noise ingredient contributing to the maximum amplitude(180mV from $^{239}Pu$ and 200 mV from $^{90}Sr/^{90}Y$) was found to be very small(8 mV) Piled up pulse occurring at the output pulse of charge-sensitive differential circuit was measured as an independent pulse since this affected the amplification in the clipping circuit and amplification circuit. This information can be used to improve the loss of measurement due to piled up pulse.

• Progress in Medical Physics
• /
• v.17 no.2
• /
• pp.96-104
• /
• 2006

Experiments from several groups Including ours have demonstrated that $Ca^{2+}$ can enhance the inactivation of N-type calcium channels. However, it is not clear if this effect can be ascribed to a 'classic' $Ca^{2+}$-dependent inactivation (CDI) mechanism. One method that has been used to demonstrate CDI of L-type calcium channels is to alter the intracellular and extracellular concentration of $Ca^{2+}$. In this paper we replaced the external divalent cation to monovalent ion ($MA^+$) to test CDI. In the previous paper, we could separate fast (${\tau}{\sim}150ms$) and slow (${\tau}{\sim}2,500ms$) components of inactivation in both $Ba^{2+}$ and $Ca^{2+}$ using 5-sec voltage step. Lowering the external divalent cation concentration to zero abolished fast inactivation with relatively little effect on slow inactivation. Slow inactivation ${\tau}$ correspond very well with provided the $MA^+$ data is shifted 10 mV hyperpolarized and slow inactivation ${\tau}$ decreases with depolarization voltage in both $MA^+\;and\;Ba^{2+}$, which consistent with a classical voltage dependent inactivation (VDI) mechanism. These results combined with those of our previous paper lead us to hypothesize that external divalent cations are required to produce fast N-channel inactivation and this divalent cation-dependent inactivation is a different mechanism from classic CDI or VDI.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.11
• /
• pp.2116-2132
• /
• 1994

In this paper, channel equalization techniques for full-digital HDTV systems are investigated Conventional equalization methods are surveyed and several channel are modeled for computer simulation. A VS-LMS (Variable Step size Least Mean Square) algorithm using the time constant concept is proposed and its performance is compared. Several equalization techniques for HDTV systems are simulated based on various channel models, and their characteristics are analyzed. Also the equalizer using fixed-point operations is simulated and its filter structure suitable for high bit rate transmission is also studied.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.195-198
• /
• 1997

This paper proposes the effective compensation method of the rotor time constant of induction motor. An indirect vector control method is highly dependent on the motor parameters. To solve the problem of performance degradation due to parameter variation in an indirect vector control of induction motor, we compensate the rotor time constant by current error feedback. The proposed method is a simple on-line rotor time constant compensation method using the information from terminal voltages and currents. As the current error, difference between current command and estimated current, approaches to zero, the value of rotor time constant in an indirect vector controller follows the real value of induction motor. This scheme is valid transient region as well as steady state region regardless of low or high speed. This method is verified by computer simulation. For this, we constructed the simulation model of induction motor, indirect vector controller and current regulated PWM (CRPWM) voltage source inverter (VSI) using SIMULINK in MATLAB.

• 전기의세계
• /
• v.18 no.3
• /
• pp.34-39
• /
• 1969

종래 사용되어온 교류발전기의 자동전압조정기는 직류여자기의 계자전류를 제어함으로써 교류 발전기의 단자전압을 일정하게 유지하는 방식이었다. 이경우 정정시의 전압변동을 적게하는 것은 비교적 용이하지만 급격한 부하변동에 대해서는 불경하였다. 즉 발전기에 급히 부하가 걸리면 발전기의 특성에 의하여 결정되는 전압이 순간적으로 떨어지고 또 발전기에는 복권작용이 없고 직류여자기및 제어장치의 시정수에 의한 조정작용의 시간적 늦음이 있기때문에 발전기의 전압은 더욱 강하한다. 이 전압강하의 방지책으로 발전기를 필요이상 크게하여 단종비를 크게하고 또 속응여자를 행하고 있다. 그리고 발전기의 부하가 유도전동기이 가능한 것은 소용량에 한하고 거의 모두 감압기동을 하고 있었다. 이 난점을 보상하기 위해 주회로전류에 의한 복권특성을 갖는 자여자교류발전기가 개발되어 왔으며 근래에는 S.C.R (Silicon Controlled Rectifier)의 발달에 따라 자기증폭기식에서 Transistor-Thyristor식으로 변천하고 있다. 여기서는 자여자발전기를 이용한 정전압장치부 자려자교류벌전기 75KVA에 대한 특성을 소개하고자 한다.

• Proceedings of the KIEE Conference
• /
• 1997.07f
• /
• pp.1964-1967
• /
• 1997

The rotor time constant variation has a large effect on the vector controlled system of induction motor. In this paper, the algorithm which compensate the misalignment of the rotor flux vector as an error caused by incorrect rotor time constant are presented. The simulations show that the proposed algorithm suitably compensates the rotor time constant.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.10
• /
• pp.2299-2304
• /
• 2010

A sensorless vector control of an induction motor provides a good performance in the middle and high speed region. However, in the low speed region, it is very difficult to implement the sensorless vector controller because the feeding voltage measured by the motor is very low. In this paper, we designed the sensorless vector controller of an induction motor using the estimate of the slip frequency. To verify the performance of the proposed controller, an experiment has been performed.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.532-534
• /
• 2008

LCD TV용 Backlight Unit을 구동하는 Inverter 및 SMPS용 IC의 발진기(OSC)는 구동 주파수를 결정하는 블록이다. 종래에는 미리 결정된 전류값과 충방전용 시정수에 의하여 스위칭 주파수가 고정 되어 있다. 이에 반하여 외부에서 스위칭 주파수를 가변하고자 할 때, 신호의 입력에 따라 스위칭 주파수가 가변 가능한 발진기(Oscillator) 블록을 제안한다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.6 no.3
• /
• pp.1-7
• /
• 1969

The Series RC load is connected with the word line in an attempt to select with high speed the information from the coincident current magnetie memory core. By taking the small time constant of the RC load, the cycle time of the output pulse is shortened by about 2 microseconds to 3 micro seconds. For this purpose, the analytical study are accomplished and the optimum circuit parameters are determined. Furthermore, the thermal problems occuring from the high speed switching of the magnetic memory core have been clarified.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.540-543
• /
• 1999

This paper describes a speed sensorless algorithm for vector control system with compensated stator resistance and rotor time constant of induction motor using a model reference adaptive system(MRAS). The system are composed of two MRAC, one is a rotor speed estimation and a stator resistor identification by back-EMF observer, other is used to identify rotor time constant by magnetizing current observer, so that the estimation can be cover a very low speed range with a robust control. The suggest control strategy and estimation method have been validated by simulation study. In the simulation using Matlab/Simulik, the proposed speed sensorless vector control system are shown to operate very well in spite of variable rotor time constant and load fluctuation.