자성유체는 자연에서 추출한 것이 아니라 자화성(Magnetizability)과 유도성(Flowability)을 동시에 갖도록 합성한 특수액체이다. 자성유체는 1960년대 중반에 미국의 NASA에서 처음 개발된 이후로 윤활, 밀봉, 감쇄, 의료 등의 분야에서 응용연구가 많이 진행되었기 때문에 고도의 정밀도를 요하는 항공, 우주산업, 컴퓨터와 반도체 분야 등에서 실용화가 크게 진전되고 있다. 특수물질일 자성유체는 전기적으로 도체인 10nm 정도의 미세한 자기입자(Magnetic particles)에 코팅을 한 후, 이것을 물, 탄화수소, 플루오르카본, 에스터 등의 매개유체(Carrier Fluids)에 혼합시켜서 콜로이드 상태로 사용하게 된다. 자성유체는 미세한 자기입자들이 매개유체내에서 서로 충돌하면서 반발력을 발생시켜서 상호간에 늘 콜로이드 상태를 유지하고 있으며, 이 특수유체가 자기장의 영향을 받게 되면 점도가 증가하면서 특이한 성질을 갖게 된다. 상대 접촉 운동면에 경계마찰이나 혼합마찰을 하게 되면 윤활상태는 비교적 나쁘다. 이러한 마찰지역에 콜로이드상의 자성유체 윤활제를 공급하면 기존의 윤활제에 비하여 대단히 효과적으로 윤활을 할 수 있게 된다. 그러나 자성유체 윤활제가 마찰부위에 원활하게 공급하기 위해서는 미끄럼 마찰부에서 자기장을 잘 형성시킬 수 있는 도체이어야 하기 때문에 특별한 윤활 시스템 설계가 제시되어야 한다. 자성유체 윤활제는 합성으로 제조된 특수물질로 여러가지 장점을 갖고는 있으나 기존 윤활유와의 적합성, 마찰열, 밀봉압력 등의 조건에서 제한적으로 사용될 수 밖에 없으므로 항공, 우주 산업이나 석유 화학분야와 같이 특수 환경에서만 사용되고, 또한 기존의 광유계 윤활제에 비하여 대단히 고가하는 문제점을 갖고 있다. 그러나 윤활 마찰면의 다양화와 가혹한 사용조건은 자성유체 윤활제의 연구개발 필요성을 크게 증대시키고 있다.xed Effects Model)을 결정하고, 각각에 해당하는 통계모형을 구축하였다. 이 결과 (1) 업종 및 기업규모별로 그룹간에 유의한 특성이 발견되었으며, (2) R&D 및 광고투자는 기업의 시장성과를 설명하는 중요한 변수이나, (3) R&D 투자의 경우는 광고에 비해 불확실성이 존재하는 것으로 나타났고, (4) 수리모형에서 도출된 한계원리가 통계모형에서도 유효한 것으로 드러났다.등을 토대로 한 10대 산업을 육성하기 위하여 과학기술부는 기술수요조사를 바탕으로 49개 주요기술을 도출하여, 과학기술 일류 국가 실현, 국민소득 2만불 달성이라는 국가적 슬로건을 내걸고 “차세대 성장동력” 창출을 위한 범정부차원의 기획과 연구비의 집중투자를 추진하고 있다.달성하기 위해서는 종합류류 전산망의 시급한 구축과 함께 화물차의 적재율을 높이고 공차율을 낮출 수 있는 운송체계의 수립이 필요한 것으로 판단된다. 그라나 이러한 화물전용차선의 효과는 단기적인 치유책일 수밖에 없기 때문에 물류유통 시설의 확충을 위한 사회간접자본의 구축을 서둘러 시행하여야 할 것이다.으로 처리한 Machine oil, Phenthoate EC 및 Trichlorfon WP는 비교적 약효가 낮았다.>$^{\circ}$E/$\leq$30$^{\circ}$NW 단열군이 연구지역 내에서 지하수 유동성이 가장 높은 단열군으로 추정된다. 이러한 사실은 3개 시추공을 대상으로 실시한 시추공 내 물리검층과 정압주입시험에서도 확인된다.. It was resulted from increase of weight of single cocoon. "Manta"2.5ppm produced 22.2kg of cocoon. It is equal to 9% increase in index, as compared to that of control. In case
The Chinese government and its agencies were trying in order to solve the unstability of resource supply and demand. Ministry of Land and Resources of China(MLR) carried out a lot of national-level policy and planning for estimating the domestic mineral and energy resources potential and recoverable reserves, as the Chinese land and resources survey plan(1999~2010), the Chinese mineral resource survey and exploration plan(2008~2020), announcement for shale gas industry policies of China, the Chinese shale gas resources evaluation and selection project for its development priority areas(2012), and the plan for Chinese shale gas development(2011~2015). The two large sedimentary basins of Chinese shale gas reserves are Sichuan and Tarim basins with excellent potential, accounting for majority of the estimated national reserves. Recoverable gas-bearing shale of China was surveyed to be widespread. The volume of recoverable shale gas reservoirs in China has been estimated to be around 31 trillion cubic meters(1,115 trillion cubic feet). China is one of only three countries with the US and Canada to produce shale gas in commercial quantities. China is concentrating on technology development to enhance commercial production of shale gas, and on survey and exploration activities to increase its recoverable reserves. The trends related to shale gas development and R&D activities in China to respond to changes in international oil market should be actively monitored based on analysis of Chinese policies and technology.
Journal of the Korean association of regional geographers
/
v.19
no.2
/
pp.301-323
/
2013
The government of the UK since the 1990, especially under the new Labour Party, has pursued sustainable development or carbon control as a core strategy for its national development. The seemingly prominent environmental policy for 'greening the government' of the UK as well as considerable achievements in energy and environment indices have attracted much attentions of policy makers and researchers for the 'low carbon green growth' in Korea. This paper tries to see the character of carbon control and environmental policy in the UK not merely as the integrating or mainstreaming policy but a new strategy for national development, that is, for the 'ecologically modernized' state, eco-state, or green state. It defines the environmental policy for carbon control in the UK as the strategy for the green state which has provided it as a principal guide for integrating national policies as a whole, and which has pursued it through market-dependent neoliberal measures. From this point of view, this paper introduces the development process of carbon control and environmental policy mainly under the new Labour Party government in the UK, and gives a reappraisal of both its policy and of energy-environment indices.
In conjunction with the Fourth Industrial Revolution, the unmanned aerial vehicle industry is being developed to a new paradigm by combining advanced technologies such as AI, Big Data and the IoT. Aeronautical developed countries such as the U.S. are focusing their efforts on the development of the safer unmanned aerial vehicles. The Korea Aerospace Research Institute, as part of the national R&D project in 2011, had succeeded in developing the first vertical takeoff and landing (VTOL) UAS, called Smart-UAV. However, although the development technology of the VTOL UAS is possessed, developing and operating of the VTOL UAS for commercial or military use are limited. The type certification procedure of the VTOL UAS developed by domestic technology is stipulated in the Korean Aviation Safety Act, but the Korean VTOL UAS airworthiness standards (KAS) hsve not been established. Thus, this study investigated the development trends of the VTOL UAS in Korea and abroad and national certification systems and procedures, and benchmarked the special conditions for the VTOL aircraft, announced by the EASA on July 2, 2019, to establish standards for type certificate of the VTOL UAS in Korea.
1970년대에 개발된 마이크로 프로세서는 제어기기 분야 및 소형 컴퓨터에서 주로 사용되어 오다가 1980년대에 이르러 RISC(Reduced Instruction Set Computer) 구조의 도입으로 중대형 컴퓨터에 이르기까지 광범위하게 사용되고 있다. 또한 반도체 기술의 급격한 발전으로 슈퍼스칼라 구조가 마이크로 프로세서에서도 적용되고 있으며 동작 속도도 수백 MHz에 이르고 있다. 마이크로 프로세서는 프로그램을 수행하기 위해서 프로그램과 데이터를 메모리로부터 읽어 와야 한다. 그런데 메모리 용량은 빠른 속도로 증가하고 있지만 동작 속도는 마이크로 프로세서의 동작 속도에 크게 미치지 못하고 있다. 1980년에 DRAM의 접근 속도는 250nsec이었으나 1998년에 RDRAM의 동작속도는 300MHz로 70여배 빨라졌다. 그러나 마이크로프로세서는 1980년에 8086의 동작 속도가 8MHz이던 것이 1998년에는 팬티엄-2가 500MHz에 이르고 있다. 더욱이 팬티엄-2는 슈퍼스칼라 구조이므로 이를 감안하면 1GHz 이상에 이르러 120여 배 빨라진 것을 알 수 있다. 이와 같은 메모리 속도와 마이크로 프로세서 속도 차이에 더하여, 메모리와 마이크로 프로세서를 인쇄 회로 기판에서 연결하는데 따른 물리적 특성은 변화하지 않으므로 데이터 전송 폭을 넓히는 것에는 한계가 있다. 따라서 향후 컴퓨터 성능 발달을 제한하는 주요 요소 중 하나는 마이크로 프로세서와 메모리 사이의 데이터 전송 폭이다. 프로그램과 데이터가 메모리에 저장되는 본 뉴먼 방식의 컴퓨터에서 데이터 전송 폭을 줄이기 위해서는 코드 밀도(Code Density)가 높은 컴퓨터 구조를 연구하는 것이 필요하다. 한편 마이크로 프로세서는 실장 제어용으로 거의 모든 전자 제품 및 자동화 기기에서 채용하고 있다. 특히 냉장고, 에어콘, 전축, TV, 세탁기 등 가전기기와 Fax, 복사기, 프린터 등 사무용기기와 자동차, 선박, 자동화기계 등 사무 및 산업용 기기와 PDA(휴대용 정보 기기), NC(Network Computer) 등 정보 기기 그리고 각종 오락기, 노래 반주지 등 정보 기기 등에서 사용하는 실장 제어용 마이크로 프로세서 시장은 매년 10% 이상씩 성장하고 있으며, 21세기 산업을 주도하는 핵심 기술로 자리 매김하고 있다. 이러한 실장 제어용 기기는 마이크로 프로세서와 메모리 및 입출력 자이가 하나의 반도체에 집적되는 경우가 많다. 그런데 반도체 가격은 반도체 크기에 따라 결정되며, 가장 넓은 면적을 차지하는 것은 메모리이다. 따라서 반도체 가격을 낮추기 위해서는 메모리 크기를 줄여야 하며, 이를 위해서 또한 코드 밀도가 높은 컴퓨터 구조에 대한 연구가 필요하다. 최근에는 322비트 RISC 명령어를 16비트 명령어로 축약한 구조가 연구되었다. ARM-7TDMI는 ARM-7의 16비트 축약 명령어 구조이며, TR4101은 MIPS-R3000의 16비트 축약 명령어 구조이다. 이들 16비트 축약 명령어 RISC는 종래 RISC와의 호환성을 위하여 2가지 모드로 동작하므로 구조가 복잡하고, 16비트 명령어에서는 8개의 레지스타만을 접근할 수 있으므로 성능이 크게 떨어지는 단점을 가진다.
Proceedings of the Korea Electromagnetic Engineering Society Conference
/
2004.01a
/
pp.1-226
/
2004
I. Title APMC'03(2003 Asia Pacific Microwave Conference) II. Objecuve $\bigcirc$Investigation of new trend in the field of microwave engineering $\bigcirc$Establishment of R&D track for wireless and high speed communication III. Scope of investigation $\bigcirc$R&D trend in various microwave engineering areas-Solid state Devices and circuits-Electromagnetic Field Theory-EMI&EMC-Phased & Active Array Antennas-Scattering & Propagation $\bigcirc$Discussions with various technical topics-New research & development topics-Establishment of wireless & high speed communications IV. Results During the conference, very active academic exchange were possible between Korean and foreign microwave engineering scholars. It was also possible to introduce the level and activities of Korean microwave engineering researches to foreign countries. Also, it was good opportunity to contact foreign scholars and researchers for valuable academic discussion using technical paper presentations and inquiries.
The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
/
v.14
no.3
/
pp.20-40
/
2003
Since unloaded Q-value of a high-temperature superconductor(HTS) filter is very high, a bandpass filter(BPF) and a lowpass filter(LPF) with an increase of pole numbers can be fabricated without an increase of an insertion loss(IL) ; recently a 70-pole BPF is developed in USA. They have an abrupt skirt property and an excellent attenuation level for out-of band. Moreover, they can be miniaturized when lumped element resonators or the slow-wave characteristic are used. Technology of fabricating a HTS epitaxial film as well as a film of a 4 inch area also makes the planar type filter with a various structure and an enhanced power handling capability possible. Recently, the HTS filter subsystems composed of a planar-type HTS filters, a GaAs-based LNA and a mini-cryocooler are developed. The extended receiver front- end subsystems for mobile radio communications decrease the noise-figure level of the communication system and the frequency interference interacted adjacent bands, and increase the efficiency of frequency and the capacity of communication system. In this paper, theory for developing the HTS filter, its kinds, its design rules, its characteristics are reviewed. The feature of the research and market trends related to the HTS filter systems for the receiver front-end subsystem of mobile base station are surveyed.
According to UPOV (International Union for Protection of New Varieties of Plants), mushroom spawn market have to be opened by the year 2009. Number of commercial strains distributed by the year 2005 were 179 of 24 species of edible and medicinal mushrooms. Only nine strains of oyster mushrooms were registered as protected variety, which is not compatible with those recorded in other advanced countries. Meaning of spawn in broad sense contains commercial strains. Development of commercial strains faces two main problems in Korea : One is the complicated genetic patterns and sexuality of mushroom species, and the other is expensive experimental equipments and fruiting body growing houses. Resolution of these problems leads to development of mushroom strains. This could be achieved as follows; genetic resources collection and assessment, molecular characterization of useful genetic characters, development of new commercial strains by hybridization using typical genetic resources, strengthening of breeding research using "Mushroom Breeding Group", management of spawn research company by consortium, foundation of mushroom general industry, promotion of consumption, and upgrade of competition ability for other countries. These points are under discussion.
Hollow-fiber membranes, is one of the new technologies that is growing rapidly in the past few decades. In addition, separation membranes using polymer materials, have attracted attentions in various fields including gas separation, fuel cells, water treatment, wastewater treatment, and organic separation. Nanofiltration (NF) membranes having the separation characteristics in the intermediate range between ultrafiltration and reverse osmosis (RO) membranes for liquid separation, with relatively low investment cost and operating pressure lower than that of RO membranes, have high permeance and rejection performance of multivalent ions as well as organic compounds of molecular weight between $200{\sim}1000gmol^{-1}$. In this paper, we would like to review the research trends on the various structure control and characterization of NF hollow fiber membranes with respect to materials and the methods of preparation (phase inversion method and interfacial polymerization method). Currently, most of NF membranes have been manufactured by plate and frame types or spiral wound types. But hollow fiber types have delayed in commercial products, because of the weak strength when to produce on the basis of the existing materials, therefore the development of new materials or improvement of existing materials will be needed. If improving manufacturing technology is available, hollow fiber types will replace spiral wound types and gradually show a higher market share.
Asia-Pacific Journal of Business Venturing and Entrepreneurship
/
v.10
no.5
/
pp.45-62
/
2015
Entrepreneurial Orientation (EO hereafter) can be described as firm level entrepreneurial tendencies. Initially Miller(1983) clarifies the construct of EO, and defines an "entrepreneurial firm as one that engages in product marketing innovation, undertakes somewhat risky ventures, and is first to come up with proactive innovations, beating competitors to the punch". After Miller (1983), Covin & Slevin(1989) adopted EO as a uni-dimensional construct, and insisted that these three dimensions can be combined into a single scale. Since Covin & Slevin(1991), researchers including Lumpkin & Dess(1996) have explored the usefulness of EO. However not many attempts have been tried to summarize the results of previous empirical researches, and to suggest future research directions. To examine and find implications, current study classified the effects of EO as 1) main and mediating effects, 2) moderating effect, 3) other effects, and provide theoretical and empirical validation of EO, which suggested by Miller(2011). After analyzing research results published in major international and Korean journals in each research domain, current paper summarizes and evaluates previous research results, and then suggests research directions for the future. In doing so, we hope to provide some theoretical and practical insight for management of small and medium sized firms.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.